1 / 5
Addictive Desert Designs
Part # F230181060103
Rock Fighter Winch Front BumperFOR THE 2021–2027 Ford Bronco
$2,498.98
This part + add-ons
Pay in full
$2,498.98
Free shipping
4-6 Week Lead
Fitment checkedWe review every order
1-year warrantyFully covered
Authorized dealerGenuine parts
Bronco Forge has been so easy to contact. I've talked to them on a Saturday, texted, and called. They are very responsive and helpful.
Not sure it fits?Send us a photo. We'll check it for you.
Fitment & Sensor Notes
ACC Relocation Bracket available separately for adaptive cruise control equipped models. WARN winches require an aftermarket fairlead. May block front camera view.
Install manual & video
Military discount
Active duty, veterans and families
Not ready yet?
Order or email contact@broncoforge.com and we'll review your year, trim, door configuration, and any other fitment details relevant to the product so you can avoid any surprises later.
2 hr
Install time
Bolt-on + trim
Fitment
Steel
Material
Non-Raptor
2021–2027 Ford Bronco
Completes the setup
Parts that go with this one.
Fitment chart
| Trim | 2021 | 2022 | 2023 | 2024 | 2025 | 2026 |
|---|---|---|---|---|---|---|
| Base | Fits | Fits | Fits | Not made this year | Fits | Fits |
| Big Bend | Fits | Fits | Fits | Fits | Fits | Fits |
| Black Diamond | Fits | Fits | Fits | Fits | Not made this year | Not made this year |
| Outer Banks | Fits | Fits | Fits | Fits | Fits | Fits |
| Badlands | Fits | Fits | Fits | Fits | Fits | Fits |
| Wildtrak | Fits | Fits | Fits | Fits | Not made this year | Not made this year |
| First Edition | Fits | Not made this year | Not made this year | Not made this year | Not made this year | Not made this year |
| Everglades | Not made this year | Fits | Fits | Fits | Not made this year | Not made this year |
| Heritage Edition | Not made this year | Not made this year | Fits | Fits | Fits | Fits |
| Stroppe Edition | Not made this year | Not made this year | Not made this year | Not made this year | Fits | Fits |
| Raptor | Not made this year | Does not fit | Does not fit | Does not fit | Does not fit | Does not fit |
Fits Doesn't fit – Not made that year
- Doors: 2-Door and 4-Door
Details
Will This Bumper Fit My Bronco?
The Addictive Desert Designs Rock Fighter Ford Bronco front bumper, part number F230181060103, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.
Who Is This Bumper Best For?
Choose the Rock Fighter for a Bronco build that needs an integrated winch mount, a low top hoop, and trail-focused front clearance. It combines recovery provisions with a center lighting position rather than using the large round-light array found on the Krawler.
How Is This Bumper Built?
The radius plate-steel shape uses high-clearance angles with a louvered lower panel for intercooler airflow. The bumper's low hoop and wing shape are important differences to compare against taller bull-bar designs. The louvered bumper panel should not be confused with the optional full aluminum skid beneath it.
Winch and Soft-Shackle Recovery Provisions
The bumper has a standard winch mount and two reinforced clevis mounts that ADD's current listing specifies for soft shackles. Choose compatible recovery equipment rather than carrying over an unsupported load-rating claim. Confirm the dimensions of the actual winch and fairlead you intend to install.
Which Lights Fit This Bumper?
The universal center mount accepts up to a 20-inch radius LED bar or five cube lights. Two mounts on top, beside the low hoop, accept round lights. Select the center arrangement first, then determine whether upper lights add useful coverage for your Bronco's trail use.
What Factory Equipment Does This Bumper Retain?
Factory parking sensors are retained. ADD offers a separate ACC relocation bracket, and the bumper may block the front camera; consider a compatible camera relocation kit. The OEM skid can fit with trimming, while the optional 3/16-inch aluminum skid provides a separate replacement option.
Planning the Complete Winch Setup
Choose the winch, fairlead, and line as a compatible system before assembling the bumper. Confirm access to the controls and the route for power cables, along with clearance for your chosen lights. A bumper's winch provision is not confirmation that every winch housing will fit. Recovery mounts also need compatible hardware; the bumper purchase alone does not supply a complete recovery system. Check the selected winch and recovery equipment instructions alongside the bumper guide.
How Does This Bumper Install?
The bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.
Read the Rock Fighter front bumper installation guide before starting. Match it to SKU F230181060103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.
What's Included?
The bumper includes the winch-mount provision, low hoop, louvered lower panel, lighting mounts, and reinforced recovery attachments. A full aluminum skid, lights, winch, and electronics relocation accessories are separate purchases. Check the selected package and guide inventory instead of assuming accessories in installed photos are included.
What's the Warranty?
ADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.
Specs
| Vehicle | 2021–2027 Ford Bronco |
|---|---|
| Trims | Non-Raptor |
| Doors | 2-Door / 4-Door |
| Fitment | Bolt-on + trim |
| Install time | 2 hr |
| Material | Steel |
| Warranty | 1 Year |
| Brand | Addictive Desert Designs |
| Part number | F230181060103 |
| GTIN | 814849026912 |
Questions
Does a winch come with this bumper?
No, the winch is sold separately. The bumper includes the standard winch mount ready to accept one.
Will this block my front camera?
It can on models equipped with a front camera. A front camera relocation kit is worth considering if that applies to your Bronco.
Does the factory skid plate still fit?
Yes, but it needs some trimming to clear the bumper. ADD also sells an optional 3/16-inch aluminum skid plate separately for more coverage.
Can I run a WARN winch on this bumper?
Yes, but WARN winches need an aftermarket fairlead to fit properly on this bumper.
Do I need the ACC relocation bracket?
Only if your Bronco has adaptive cruise control. It's sold separately and relocates the sensor so the feature keeps working.
Does this bumper fit the Bronco Raptor?
No. This Rock Fighter is built for the standard-width Bronco. ADD makes a separate Rock Fighter Winch Front Bumper sized specifically for the Bronco Raptor.
Have a different question? Ask us about this part
Shipping & returns
Ships direct from the manufacturer's warehouse.
Processing time: 4-6 Week Lead
Standard delivery: 3–5 business days to the contiguous 48 states
Oversized items (bumpers, roof racks, sliders) ship via freight carrier. Freight deliveries require a signature and delivery appointment — we'll contact you to coordinate.
Free shipping on orders more than $150. We do not ship to Alaska, Hawaii, or international addresses. Tracking is emailed automatically once your order ships.
Lifetime Returns
Days 1-30: Refund to your original payment method, minus a 25% restocking fee.
Day 31 and beyond: Lifetime store credit (minus 25% restocking fee) — never expires, but requires mint condition and photo approval first.
To start a return, email contact@broncoforge.com for an RMA number. Returns without an RMA will not be accepted.
Items must be unused, uninstalled, and in original packaging ($25 minimum purchase). Customer covers return shipping unless the item arrived damaged or incorrect. Custom/special-order, sale/clearance, and installed or worn items are not eligible for return.
California Prop 65 warning
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.