DV8 Offroad MTO Series Ford Bronco rear bumper, off-vehicle front view with lights and license plate mount
DV8 Offroad MTO Series Ford Bronco rear bumper, passenger-side installed view showing wheel clearance
DV8 Offroad MTO Series Ford Bronco rear bumper, rear quarter view on a gray Bronco outdoors
DV8 Offroad MTO Series Ford Bronco rear bumper, driver-side close-up of the mesh corner and light
DV8 Offroad MTO Series Ford Bronco rear bumper, elevated passenger-side corner view
DV8 Offroad MTO Series Ford Bronco rear bumper, full rear quarter view on a rocky trail
DV8 Offroad MTO Series Ford Bronco rear bumper, straight-on rear vehicle view
DV8 Offroad MTO Series Ford Bronco rear bumper, driver-side view along the bumper and body
DV8 Offroad MTO Series Ford Bronco rear bumper, passenger-side light, recovery mount and mesh vent detail
DV8 Offroad MTO Series Ford Bronco rear bumper, driver-side corner and flush light below the taillight
DV8 Offroad MTO Series Ford Bronco rear bumper, parking sensors, flush light and recovery mount close-up
DV8 Offroad MTO Series Ford Bronco rear bumper, low passenger-side view of the bumper underside
DV8 Offroad MTO Series Ford Bronco rear bumper, side profile beneath the spare tire
DV8 Offroad MTO Series Ford Bronco rear bumper, top-down driver-side corner and upper ledge
DV8 Offroad MTO Series Ford Bronco rear bumper, off-vehicle mesh corner panel and recovery mount close-up
DV8 Offroad MTO Series Ford Bronco rear bumper, inner face with mounting brackets and light openings
DV8 Offroad MTO Series Ford Bronco rear bumper, top-down off-vehicle view showing the center recess
DV8 Offroad MTO Series Ford Bronco rear bumper, bumper, brackets, license plate mount and hardware laid out
1 / 18

DV8 Offroad

Part # RBBR-01

MTO Series Rear BumperFOR THE 2021–2027 Ford Bronco

5.0 1 review

$849.99 $999.99
Pay in full $849.99 $999.99 Today
Free shipping Same-Day, before 2 PM
Fitment checkedWe review every order
1-year warrantyFully covered
Authorized dealerGenuine parts
Jared YoungVerified buyer2025 Badlands, SAS · Glendale, Arizona
Bronco Forge has been so easy to contact. I've talked to them on a Saturday, texted, and called. They are very responsive and helpful.
Fitment & Sensor Notes

Fits 2021–2026 full-size Bronco, including Raptor. Raptor models require LPBR-03 license plate bracket; BLIS-equipped Broncos also require LPBR-03 to retain BLIS. Rear mud flaps must be removed. Factory parking sensors transfer, but center bezel tabs require trimming. For factory plastic bumpers, DV8 recommends OE sensor bezels or MPRSNSR-01. License plate light requires wiring.

Install manual & video
Military discount

Active duty, veterans and families

Not ready yet?

Order or email contact@broncoforge.com and we'll review your year, trim, door configuration, and any other fitment details relevant to the product so you can avoid any surprises later.

2.5 hr
Install time
Bolt-on
Fitment
4 mm steel body
Material
All trims
2021–2027 Ford Bronco

On Customer Broncos

  • Up to 37-inch spare clearance
  • 4 mm steel body; 5 mm supports
  • Two 3-inch pod light mounts
  • 3/4-inch D-ring shackle mounts
  • Factory hitch and sensor provisions

Fitment chart

Which Ford Bronco trims and model years this part fits
Trim202120222023202420252026
BaseFitsFitsFitsNot made this yearFitsFits
Big BendFitsFitsFitsFitsFitsFits
Black DiamondFitsFitsFitsFitsNot made this yearNot made this year
Outer BanksFitsFitsFitsFitsFitsFits
BadlandsFitsFitsFitsFitsFitsFits
WildtrakFitsFitsFitsFitsNot made this yearNot made this year
First EditionFitsNot made this yearNot made this yearNot made this yearNot made this yearNot made this year
EvergladesNot made this yearFitsFitsFitsNot made this yearNot made this year
Heritage EditionNot made this yearNot made this yearFitsFitsFitsFits
Stroppe EditionNot made this yearNot made this yearNot made this yearNot made this yearFitsFits
RaptorNot made this yearFitsFitsFitsFitsFits

Fits Doesn't fit – Not made that year

  • Doors: 2-Door and 4-Door

Details

The DV8 Offroad MTO Series Rear Bumper (RBBR-01) replaces the factory rear bumper on 2021–2026 full-size Ford Bronco 2-door and 4-door models, including Bronco Raptor. Its steel body protects the rear corners while providing two D-ring shackle mounts, openings for optional rear pod lights, and a side-mounted license plate bracket with lighting.

Rear Clearance, Recovery Mounts and Lighting

Moving the license plate to the driver's side leaves clearance for a spare tire up to 37 inches on the factory tailgate carrier; a third-brake-light extension may be needed to maintain visibility with a larger tire. The bumper includes reinforced clevis mounts for 3/4-inch D-ring shackles and positions for two optional 3-inch flush-mount pods. It works with the factory tow hitch rather than providing its own receiver.

Steel Construction and Factory-System Transfer

The MTO bumper uses 4 mm steel body panels, 5 mm mounts and supports, paintable aluminum mesh, and a two-stage micro-texture black powder coat. Factory rear parking sensors and wiring transfer to the bumper, but some sensor-bezel tabs require trimming and the license plate light requires wiring work. Broncos with BLIS require DV8's LPBR-03 license plate bracket to retain that system.

Specs

Specifications for 2021-2026 Ford Bronco Rear Bumper | DV8 Offroad MTO Series
Vehicle2021–2027 Ford Bronco
TrimsAll trims
Doors2-Door / 4-Door
FitmentBolt-on
Install time2.5 hr
Material4 mm steel body; 5 mm steel mounts/supports; aluminum mesh
Warranty1 Year
BrandDV8 Offroad
Part numberRBBR-01
GTIN810087810177
Questions

Does the DV8 MTO rear bumper work with the factory tow hitch?

Yes. DV8 lists RBBR-01 as compatible with the factory tow hitch. The bumper itself does not include a hitch receiver.

Will my factory rear parking sensors still work?

Yes, the bumper has openings to retain factory parking sensors and uses the original sensor wiring. DV8's installation guide calls for trimming some center sensor-bezel tabs and securing the outer sensors without their original cages. Broncos with plastic factory bumpers may benefit from OE sensor bezels or DV8 MPRSNSR-01.

Will the tailgate open with a 37-inch spare tire?

DV8 specifies clearance for a spare tire up to 37 inches on the factory tailgate carrier. A third-brake-light extension may be needed to keep the light visible; bumper clearance does not increase the tire carrier's weight rating.

Do the two 3-inch pod lights come with the bumper?

No. The bumper has mounts for two optional 3-inch flush-mount LED pods; the lights and any additional lighting wiring are sold separately.

Does the included license plate bracket fit the Bronco Raptor?

No. DV8 specifies the LPBR-03 license plate bracket for Bronco Raptor models. The standard license plate bracket supplied with RBBR-01 does not fit the Raptor.

Will factory blind-spot monitoring (BLIS) still work?

DV8 requires the LPBR-03 license plate bracket to retain BLIS. The included plate bracket also does not fit the Bronco Raptor, so Raptor owners need LPBR-03 even without BLIS.

Is installation completely bolt-on with no wiring or trimming?

No. The bumper mounts using factory and supplied hardware, but DV8 instructs installers to trim the center parking-sensor bezel tabs as needed and wire the new license-plate light to the factory circuit or a compatible new connector. The installation guide estimates about 2.5 hours and recommends assistance when lifting the bumper.

Can I use the D-ring mounts as Hi-Lift jack points?

DV8 lists these as recovery shackle mounts but does not publish a vehicle-lifting rating for RBBR-01. Use manufacturer-approved lifting points rather than treating the shackle mounts as jack points.

Do rear mud flaps need to be removed for installation?

Yes. DV8's fitment notes call for removal of rear mud flaps to clear the bumper.

Can the aluminum mesh inserts be painted?

Yes. The aluminum mesh inserts are removable and can be painted or powder-coated separately from the bumper.

Have a different question? Ask us about this part

Shipping & returns

Ships direct from the manufacturer's warehouse.

Processing time: Same-Day, before 2 PM
Standard delivery: 3–5 business days to the contiguous 48 states

Oversized items (bumpers, roof racks, sliders) ship via freight carrier. Freight deliveries require a signature and delivery appointment — we'll contact you to coordinate.

Free shipping on orders more than $150. We do not ship to Alaska, Hawaii, or international addresses. Tracking is emailed automatically once your order ships.

Lifetime Returns

Days 1-30: Refund to your original payment method, minus a 25% restocking fee.


Day 31 and beyond: Lifetime store credit (minus 25% restocking fee) — never expires, but requires mint condition and photo approval first.

To start a return, email contact@broncoforge.com for an RMA number. Returns without an RMA will not be accepted.

Items must be unused, uninstalled, and in original packaging ($25 minimum purchase). Customer covers return shipping unless the item arrived damaged or incorrect. Custom/special-order, sale/clearance, and installed or worn items are not eligible for return.

Full return policy

California Prop 65 warning

WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Reviews