Axial Auxiliary Third Brake LightFOR THE 2021–2026 Ford Bronco

Choose a targeted Bronco lighting upgrade with this auxiliary third brake light. Give the rear brake indication its own updated appearance while keeping the spare-tire and carrier arrangement in mind.

A larger brake-light layout around the spare

The Axial auxiliary kit lists both a replacement third brake light and a spare-tire brake light. Its smoked lenses and black ABS housings provide a different rear appearance while adding red LED brake illumination. Confirm clearance around an oversized spare or aftermarket carrier before assembly.

Check the spare-tire and carrier arrangement

The third brake light sits in an area that owners often change when fitting larger tires, a different wheel offset, or a tire-carrier accessory. Check the clearance around the light, spare, and carrier before installation. A light made for the Bronco does not automatically establish clearance with every oversized tire or relocation bracket. Keep the rear warning light visible and avoid placing stored equipment in front of the illuminated area.

Keep the rear lighting functions distinct

A third brake light provides a separate brake indication from the main tail-light pair. It is not a replacement for the running lights, reverse lights, or rear turn signals. Choose this assembly for its specific brake-light arrangement and lens appearance. If a pulsating function is part of the design, verify that the operating behavior is appropriate for the place the vehicle will be used rather than assuming every aftermarket lighting mode is permitted everywhere.

Test the brake indication before driving

Follow the connection and mounting sequence for this exact kit, then test the light with the brake pedal applied. Make sure the lens and housing are secure, the harness is supported, and no cable is caught behind the spare or carrier. Check the light again after any future tire or carrier change. Photos show the product arrangement, while the included-parts list establishes whether a spare-tire light or only the replacement upper light is supplied.

Bronco fitment and equipment requirements

The verified application is 2021-2026 Ford Bronco, both two-door and four-door models. Verify the factory connector and lighting configuration before installation. Bronco Raptor compatibility has not been verified for this part number. Does not fit Bronco Sport. Model-year coverage is limited to the listed application; it is not extended to a later year because the body looks similar. Check the actual equipment installed on the vehicle if a previous owner has changed it.

Installation planning

The listed installation method is plug-in. The supplier estimate is about 1 hour. Treat a time estimate as a planning guide, not a promise for every vehicle. Lay out the supplied pieces, review the instructions for this exact SKU, and check the original mounting area before starting. Allow extra time if other accessories need to be moved or if the vehicle has already been modified.

Key specifications

• Auxiliary LED Third Brake Light
• Modern Electronics with Super Bright LED Technology
• Textured Black ABS Plastic Housings
• Smoked Polycarbonate Lenses
• Easy Plug and Play Installation

Includes

• (1) Replacement Third Brake Light
• (1) Spare Tire Brake Light

Warranty coverage

Three years for manufacturing defects and one year for condensation defects. The manufacturer terms apply to the original retail purchaser and include conditions and exclusions. This limited warranty does not mean every type of damage is covered. Retain the purchase record and installation information; wear, installation damage, misuse, and changes to the part can affect eligibility. The stated coverage follows the current manufacturer terms for purchases after September 1, 2026.