1 / 16
Barricade
Part # FB14618
HD LED Rear BumperFOR THE 2021–2026 Ford Bronco
$699.99
This part + add-ons
Pay in full
$699.99
Free shipping
Ships from the manufacturer
Fitment checkedWe review every order
5-year warrantyFully covered
Authorized dealerGenuine parts
Bronco Forge has been so easy to contact. I've talked to them on a Saturday, texted, and called. They are very responsive and helpful.
Not sure it fits?Send us a photo. We'll check it for you.
Fitment & Sensor Notes
Does not fit Bronco Raptor. Does not fit Bronco Sport.
Install manual & video
Military discount
Active duty, veterans and families
Not ready yet?
Order or email contact@broncoforge.com and we'll review your year, trim, door configuration, and any other fitment details relevant to the product so you can avoid any surprises later.
2 hr
Install time
Bolt-on
Fitment
Steel
Material
Non-Raptor
2021–2026 Ford Bronco
Completes the setup
Parts that go with this one.
Fitment chart
| Trim | 2021 | 2022 | 2023 | 2024 | 2025 | 2026 |
|---|---|---|---|---|---|---|
| Base | Fits | Fits | Fits | Not made this year | Fits | Fits |
| Big Bend | Fits | Fits | Fits | Fits | Fits | Fits |
| Black Diamond | Fits | Fits | Fits | Fits | Not made this year | Not made this year |
| Outer Banks | Fits | Fits | Fits | Fits | Fits | Fits |
| Badlands | Fits | Fits | Fits | Fits | Fits | Fits |
| Wildtrak | Fits | Fits | Fits | Fits | Not made this year | Not made this year |
| First Edition | Fits | Not made this year | Not made this year | Not made this year | Not made this year | Not made this year |
| Everglades | Not made this year | Fits | Fits | Fits | Not made this year | Not made this year |
| Heritage Edition | Not made this year | Not made this year | Fits | Fits | Fits | Fits |
| Stroppe Edition | Not made this year | Not made this year | Not made this year | Not made this year | Fits | Fits |
| Raptor | Not made this year | Does not fit | Does not fit | Does not fit | Does not fit | Does not fit |
Fits Doesn't fit – Not made that year
- Doors: 2-Door and 4-Door
- Front bumper: Plastic, Capable, Modular, Aftermarket
Details
Rear lighting and 3 mm steel plate are the defining features of this Barricade HD bumper. Designed for the 2021-2026 Ford Bronco, it pairs two included LED lights with a full-width steel body and dedicated mounts for the factory backup sensors.
Two Rear Lights Included
The 3-inch square lamps use 5 W CREE LEDs at a 6000 K color temperature. Each has an aluminum housing, polycarbonate lens, and IP67 ingress rating. The lights fit the bumper's rear openings; wiring them is part of the lighting installation.
3 mm Plate and D-Ring Mounts
The bumper body is built from 3 mm steel plate with two built-in D-ring attachment points. Epoxy pre-coating lies beneath the textured black powder coat. This model supplies the lights and mounts without adopting the tube construction of the HD Tubular rear bumper.
Spare-Tire License Plate Mount
The supplied bracket relocates the plate to the spare tire and reuses the factory plate light. Its extension harness routes through the tailgate. That routing can require modifying and resealing the rubber grommet, even though the bumper itself bolts to existing mounts.
Sensor Fitment and Installation
Fits 2021-2026 6th-generation Ford Bronco 2-door and 4-door models, excluding Raptor and Bronco Sport. Factory rear sensors transfer into the bumper; plugs cover the openings on vehicles without sensors. The bumper-mounting estimate is about two hours, with additional work for wiring.
The Barricade HD Plate LED rear bumper is another lighting-equipped option with a cold-formed plate body.
Ford Bronco years and trims
Fits the 2021–2026 sixth-generation Ford Bronco in 2-door and 4-door configurations. Model years: 2021, 2022, 2023, 2024, 2025 and 2026.
- Base: 2021–2023, 2025–2026
- Big Bend: 2021–2026
- Black Diamond: 2021–2024
- Outer Banks: 2021–2026
- Badlands: 2021–2026
- Wildtrak: 2021–2024
- First Edition: 2021
- Everglades: 2022–2024
- Heritage Edition: 2023–2026
- Stroppe Edition: 2025–2026
Does not fit Bronco Raptor or Bronco Sport.
What's Included
- 1 × Rear Bumper Assembly
- 1 × Driver/left Top Fill Panel
- 1 × Passenger/right Top Fill Panel
- 2 × Mesh Fill Panels
- 4 × Plastic Sensor Hole Plugs
- 1 × Sensor Wire Harness Extension (short)
- 1 × License Plate Relocation Bracket
- 2 × Plastic License Plate Plugs
- 1 × License Light Harness Extension (long)
- 1 × 4mm Wrench
- Installation hardware and small mounting components
- 2 × LED cube lights
Specs
| Vehicle | Ford Bronco |
|---|---|
| Model years | 2021-2026 |
| Generation | 6th generation |
| Doors | 2-door / 4-door |
| Bronco Raptor | Not compatible |
| Bronco Sport | Not compatible |
| Brand | Barricade |
| Product line | HD |
| Part number | FB14618 |
| Bumper position | Rear |
| Bumper style | Full width |
| Material | Steel plate |
| Plate thickness | 3 mm |
| Finish | Textured black powder coat |
| Undercoat | Epoxy pre-coating |
| D-ring mounts | 2 built-in |
| Winch mount | None |
| Rear parking sensors | Factory sensors retained |
| Sensor configurations | With or without sensors |
| LED lights | 2 included |
| Color temperature | 6000 K |
| Light ingress rating | IP67 |
| Light housing | Aluminum |
| Light lens | Polycarbonate |
| LED emitter rating | 5 W CREE LEDs |
| Light size | 3-inch square |
| Replacement hardware | U11048H |
| Replacement light | U1595H |
| License plate bracket | Spare-tire mount |
| Wiring grommet | May need modification |
| Installation | Factory mounting points |
| Bumper install time | About 2 hours |
| Manufacturing warranty | 5 years, limited |
| Finish warranty | 3 years, limited |
| Warranty eligibility | Purchases after Sep 1, 2026 |
Questions
Which Ford Bronco models does this fit?
Fits 2021-2026 6th-generation Ford Bronco 2-door and 4-door models, excluding Raptor. Bronco Sport is not compatible.
Does installation require any wiring modifications?
The bumper uses factory mounting points. Routing the relocated plate-light harness may require modifying and resealing the tailgate's rubber grommet; auxiliary-light wiring is an additional task.
What are the included light specifications?
Two 3-inch square lights use 5 W CREE LEDs with a 6000 K color temperature. Each lamp has an IP67 rating, aluminum housing, and polycarbonate lens.
Can I keep the factory rear parking sensors?
Yes. The bumper accommodates the factory rear parking sensors. The existing sensors transfer from the original bumper.
Have a different question? Ask us about this part
Shipping & returns
Ships direct from the manufacturer's warehouse.
Processing time:
Standard delivery: 3–5 business days to the contiguous 48 states
Oversized items (bumpers, roof racks, sliders) ship via freight carrier. Freight deliveries require a signature and delivery appointment — we'll contact you to coordinate.
Free shipping on orders more than $150. We do not ship to Alaska, Hawaii, or international addresses. Tracking is emailed automatically once your order ships.
Lifetime Returns
Days 1-30: Refund to your original payment method, minus a 25% restocking fee.
Day 31 and beyond: Lifetime store credit (minus 25% restocking fee) — never expires, but requires mint condition and photo approval first.
To start a return, email contact@broncoforge.com for an RMA number. Returns without an RMA will not be accepted.
Items must be unused, uninstalled, and in original packaging ($25 minimum purchase). Customer covers return shipping unless the item arrived damaged or incorrect. Custom/special-order, sale/clearance, and installed or worn items are not eligible for return.
California Prop 65 warning
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.