1 / 6
Addictive Desert Designs
Part # F230194120103
Bomber Front Bumper (Baja)FOR THE 2021–2027 Ford Bronco
$2,198.98
This part + add-ons
Pay in full
$2,198.98
Free shipping
4-6 Week Lead
Fitment checkedWe review every order
1-year warrantyFully covered
Authorized dealerGenuine parts
Bronco Forge has been so easy to contact. I've talked to them on a Saturday, texted, and called. They are very responsive and helpful.
Not sure it fits?Send us a photo. We'll check it for you.
Fitment & Sensor Notes
ACC Relocation Bracket available separately for adaptive cruise control equipped models. Minor trimming required if running the factory plastic skid plate.
Install manual & video
Military discount
Active duty, veterans and families
Not ready yet?
Order or email contact@broncoforge.com and we'll review your year, trim, door configuration, and any other fitment details relevant to the product so you can avoid any surprises later.
2 hr
Install time
Bolt-on + trim
Fitment
Steel
Material
Non-Raptor
2021–2027 Ford Bronco
Fitment chart
| Trim | 2021 | 2022 | 2023 | 2024 | 2025 | 2026 |
|---|---|---|---|---|---|---|
| Base | Fits | Fits | Fits | Not made this year | Fits | Fits |
| Big Bend | Fits | Fits | Fits | Fits | Fits | Fits |
| Black Diamond | Fits | Fits | Fits | Fits | Not made this year | Not made this year |
| Outer Banks | Fits | Fits | Fits | Fits | Fits | Fits |
| Badlands | Fits | Fits | Fits | Fits | Fits | Fits |
| Wildtrak | Fits | Fits | Fits | Fits | Not made this year | Not made this year |
| First Edition | Fits | Not made this year | Not made this year | Not made this year | Not made this year | Not made this year |
| Everglades | Not made this year | Fits | Fits | Fits | Not made this year | Not made this year |
| Heritage Edition | Not made this year | Not made this year | Fits | Fits | Fits | Fits |
| Stroppe Edition | Not made this year | Not made this year | Not made this year | Not made this year | Fits | Fits |
| Raptor | Not made this year | Does not fit | Does not fit | Does not fit | Does not fit | Does not fit |
Fits Doesn't fit – Not made that year
- Doors: 2-Door and 4-Door
Details
Will This Bumper Fit My Bronco?
The Addictive Desert Designs Bomber Ford Bronco front bumper, part number F230194120103, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.
Who Is This Bumper Best For?
This Bronco Bomber is the Baja lighting version. Choose it if you have settled on Baja Designs LP4 lamps and want their dedicated center layout in a close-fitting plate bumper. The other Bomber lighting version uses different center mounts, so select by the lamps you actually intend to run.
How Is This Bumper Built?
The plate-steel bumper follows the Bronco's body lines with a low-profile shape. Hammer black powder coat covers the steel and satin black finishes the aluminum panels. Those panels frame the lights and distinguish the Bomber's face from a universal light-bar bumper.
Dedicated Baja LP4 Light Mounts
The center panel frames mounting positions for three Baja Designs LP4 lights. These are light-specific provisions, not a promise that any round lamp of similar diameter fits. Check the lamp model before ordering, especially if transferring lights from a previous build or comparing the two Bomber versions.
Which Lights Fit This Bumper?
Two additional cube-light positions sit at the sides. This lets your Bronco use the center round lights alongside separate side illumination. Lights and their harnesses are purchased separately. Decide how the lamps will be switched and where the wiring will run before installing the bumper.
What Factory Equipment Does This Bumper Retain?
The factory parking sensors are retained. ADD's current listing specifies reinforced clevis mounts for soft shackles. It lists the OEM skid as reusable with trimming, with a matching 3/16-inch vented aluminum skid available separately. Plan the separate ACC relocation bracket for an equipped Bronco rather than assuming parking-sensor retention covers ACC.
Choosing the Complete Lighting Setup
Compare the complete installed setup, not just the bumper's light openings. A light mount does not include the lamp, switch, harness, or connectors. Choose the beam pattern for your intended use and check the housing depth and bracket width before purchase. Plan how the wiring will reach the mounting position without being pinched during assembly. If you already own lights, identify their exact models first; similar nominal sizes can use different housings and mounting brackets.
How Does This Bumper Install?
The bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.
Read the Bomber front bumper installation guide before starting. Match it to SKU F230194120103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.
What's Included?
The Baja Bomber package provides the bumper assembly, aluminum panels, center and side light mounts, and installation provisions. The optional full aluminum skid is separate from the bumper. Lamps, recovery gear, wiring, and electronics relocation equipment are separate purchases.
What's the Warranty?
ADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.
Specs
| Vehicle | 2021–2027 Ford Bronco |
|---|---|
| Trims | Non-Raptor |
| Doors | 2-Door / 4-Door |
| Fitment | Bolt-on + trim |
| Install time | 2 hr |
| Material | Steel |
| Warranty | 1 Year |
| Brand | Addictive Desert Designs |
| Part number | F230194120103 |
| GTIN | 814849027049 |
Questions
What's the difference between this and the Rigid version of the Bomber?
Same bumper, different center light mounts. This version is sized for three Baja Designs LP4 lights instead of Rigid 360s.
Does the factory tow hook still work?
Yes. The factory tow hooks stay in place underneath the bumper after installation.
Does the factory skid plate still fit?
It fits with some trimming. ADD also sells an optional 3/16-inch aluminum skid plate separately for more coverage than the stock plastic skid.
Do I need the ACC relocation bracket?
Only if your Bronco has adaptive cruise control. It's sold separately and relocates the sensor so the feature keeps working.
Will my parking sensors still work?
Yes. OEM parking sensors are built into the Bomber's design.
Can I run a winch on this bumper?
No, the Bomber doesn't include a winch mount. If you want winch capability, the Rock Fighter or Krawler are built for that.
Have a different question? Ask us about this part
Shipping & returns
Ships direct from the manufacturer's warehouse.
Processing time: 4-6 Week Lead
Standard delivery: 3–5 business days to the contiguous 48 states
Oversized items (bumpers, roof racks, sliders) ship via freight carrier. Freight deliveries require a signature and delivery appointment — we'll contact you to coordinate.
Free shipping on orders more than $150. We do not ship to Alaska, Hawaii, or international addresses. Tracking is emailed automatically once your order ships.
Lifetime Returns
Days 1-30: Refund to your original payment method, minus a 25% restocking fee.
Day 31 and beyond: Lifetime store credit (minus 25% restocking fee) — never expires, but requires mint condition and photo approval first.
To start a return, email contact@broncoforge.com for an RMA number. Returns without an RMA will not be accepted.
Items must be unused, uninstalled, and in original packaging ($25 minimum purchase). Customer covers return shipping unless the item arrived damaged or incorrect. Custom/special-order, sale/clearance, and installed or worn items are not eligible for return.
California Prop 65 warning
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.