DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, panel pair with recessed storage sides
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, installed panel carrying blue air hose and red pouch
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, opposite panel with shovel and mounted gear
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, low cargo-area view of panel carrying shovel
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, side view of shovel secured to panel
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, exterior side view with roof removed
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, empty panel viewed through open rear door
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, empty opposite panel from cargo area
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, close-up of slotted pocket edge beside seat belt
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, shovel and pouch mounted to panel
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, rear cargo view of both loaded panels
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, blue air hose secured to mounting grid
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, single panel on white background
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, red and green pouches mounted to panel
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, opposite panel on white background
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, angled product view showing pocket depth
DV8 Offroad Ford Bronco pocketed rear window MOLLE panels, panel pair with brackets and mounting hardware
1 / 17

DV8 Offroad

Part # MPBR-08

Pocketed Rear Window Molle PanelsFOR THE 2021–2026 Ford Bronco

$260.99 $289.99
Pay in full $260.99 $289.99 Today
Free shipping Same-Day, before 2 PM
Fitment checkedWe review every order
1-year warrantyFully covered
Authorized dealerGenuine parts
Jared YoungVerified buyer2025 Badlands, SAS · Glendale, Arizona
Bronco Forge has been so easy to contact. I've talked to them on a Saturday, texted, and called. They are very responsive and helpful.
Fitment & Sensor Notes

Fits 2021-2026 Ford Bronco 4-door hard top only, all trims. Does NOT fit soft top configurations, 2-door models, or Ford Bronco Sport.

Install manual
Military discount

Active duty, veterans and families

Not ready yet?

Order or email contact@broncoforge.com and we'll review your year, trim, door configuration, and any other fitment details relevant to the product so you can avoid any surprises later.

1.5 hr
Install time
Bolt-on
Fitment
3mm steel
Material
4-door hard top
2021–2026 Ford Bronco

Double-Sided Molle Storage Without Losing Cargo Floor Space

3mm steel panels conform to the rear window lines with molle on both sides of each panel, letting you run knife sheaths, tools, and med kit accessories while keeping the main cargo area open. M6 slots accept 1/4-inch carriage bolts for additional mounting.

Fitment chart

Which Ford Bronco trims and model years this part fits
Trim202120222023202420252026
BaseFitsFitsFitsNot made this yearFitsFits
Big BendFitsFitsFitsFitsFitsFits
Black DiamondFitsFitsFitsFitsNot made this yearNot made this year
Outer BanksFitsFitsFitsFitsFitsFits
BadlandsFitsFitsFitsFitsFitsFits
WildtrakFitsFitsFitsFitsNot made this yearNot made this year
First EditionFitsNot made this yearNot made this yearNot made this yearNot made this yearNot made this year
EvergladesNot made this yearFitsFitsFitsNot made this yearNot made this year
Heritage EditionNot made this yearNot made this yearFitsFitsFitsFits
Stroppe EditionNot made this yearNot made this yearNot made this yearNot made this yearFitsFits
RaptorNot made this yearFitsFitsFitsFitsFits

Fits Doesn't fit – Not made that year

  • Doors: 4-Door

Details

3mm Steel Pocketed Molle Panels That Mount to Both Sides of Your 4-Door Hard Top Bronco's Rear Windows

The DV8 Offroad Pocketed Rear Window Molle Panels are built for 4-door hard top 2021-2026 Ford Bronco owners who want maximum rear interior storage without giving up cargo floor space. The panels conform to the rear window lines and mount at multiple points for a rattle-free fit on rough terrain. The molle design lets you run knife sheaths, tools, med kit accessories, and molle bags on both sides of the panels simultaneously, keeping the main cargo area open for larger gear. M6 slots throughout accept 1/4-inch carriage bolts for additional mounting options. Panels can be run with or without the hard top, and hard top removal does not require pulling the panels.

What It Does
3mm steel construction finished in micro-texture black powder coat. Direct-fit bolt-on installation with no cutting required. Multiple attachment points keep the panels locked in and rattle-free on the trail. Molle on both sides of each panel doubles the usable mounting surface. M6 carriage bolt slots add versatile mounting beyond standard molle. Install is rated at 1.5 hours.

Fitment
Fits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 4-door hard top only, all trims. Does NOT fit soft top configurations. Does NOT fit 2-door Bronco models. Does NOT fit Ford Bronco Sport.

Before You Order
Hard top 4-door models only. Not compatible with soft tops or 2-door Broncos. Hard top can be removed and reinstalled without pulling these panels off.

What's Included

  • Driver side pocketed rear window molle panel
  • Passenger side pocketed rear window molle panel
  • Full hardware kit

Key Specs

  • Material: 3mm steel
  • Finish: Micro-texture black powder coat
  • Molle mounting: Both sides of each panel
  • M6 carriage bolt slots: Yes
  • Hard top compatible: Yes, runs with or without
  • Soft top compatible: No
  • Install: Direct-fit bolt-on, no cutting
  • Install time: 1.5 hours
  • Warranty: 1 year
  • SKU: MPBR-08
  • UPC: 810087814090

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

What's Included

  • Driver side pocketed rear window molle panel
  • Passenger side pocketed rear window molle panel
  • Full hardware kit

Specs

Specifications for 2021-2026 Ford Bronco Pocketed Rear Window Molle Panels | DV8 Offroad
Vehicle2021–2026 Ford Bronco
Trims4-door hard top
Doors4-Door
FitmentBolt-on
Install time1.5 hr
Material3mm steel
Warranty1 Year
BrandDV8 Offroad
Part numberMPBR-08
GTIN810087814090
Questions

Does this fit the soft top Bronco?

No. These panels are designed for 4-door hard top models only.

Can I remove the hard top with the panels installed?

Yes. The panels do not need to be removed for hard top removal or reinstallation.

What are the M6 slots for?

The M6 slots accept 1/4-inch carriage bolts for mounting accessories that don't use a standard molle grid, giving you more versatile attachment options across the panel.

Can gear be mounted to both sides of the panels?

Yes. The pocketed design allows gear to be mounted on both the front and back faces of each panel, doubling usable storage without taking up floor space.

Does this fit the Bronco Sport?

No. Fits the full-size 2021-2026 Ford Bronco 4-door hard top only.

Have a different question? Ask us about this part

Shipping & returns

Ships direct from the manufacturer's warehouse.

Processing time: Same-Day, before 2 PM
Standard delivery: 3–5 business days to the contiguous 48 states

Oversized items (bumpers, roof racks, sliders) ship via freight carrier. Freight deliveries require a signature and delivery appointment — we'll contact you to coordinate.

Free shipping on orders more than $150. We do not ship to Alaska, Hawaii, or international addresses. Tracking is emailed automatically once your order ships.

Lifetime Returns

Days 1-30: Refund to your original payment method, minus a 25% restocking fee.


Day 31 and beyond: Lifetime store credit (minus 25% restocking fee) — never expires, but requires mint condition and photo approval first.

To start a return, email contact@broncoforge.com for an RMA number. Returns without an RMA will not be accepted.

Items must be unused, uninstalled, and in original packaging ($25 minimum purchase). Customer covers return shipping unless the item arrived damaged or incorrect. Custom/special-order, sale/clearance, and installed or worn items are not eligible for return.

Full return policy

California Prop 65 warning

WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Reviews