DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, pair of panels on white background
DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, interior close-up with black storage pouch attached
DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, exterior view with red pouch and orange rope mounted
DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, low exterior view of panel with pouch attached
DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, rear cargo view with rear seats folded
DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, rear view of both panels beside upright seats
DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, angled interior view of black pouches
DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, panel holding bottle sleeve and mounted gear
DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, opposite panel with black pouches and accessories
DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, single panel showing recessed pocket side
DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, opposite panel on white background
DV8 Offroad Ford Bronco 2-door rear window pocket MOLLE panels, panel pair, mounting brackets and fasteners laid out
1 / 12

DV8 Offroad

Part # MPBR-12

2-Door Rear Window Pocket Molle PanelsFOR THE 2021–2026 Ford Bronco

$269.99 $299.99
Pay in full $269.99 $299.99 Today
Free shipping Same-Day, before 2 PM
Fitment checkedWe review every order
1-year warrantyFully covered
Authorized dealerGenuine parts
Jared YoungVerified buyer2025 Badlands, SAS · Glendale, Arizona
Bronco Forge has been so easy to contact. I've talked to them on a Saturday, texted, and called. They are very responsive and helpful.
Fitment & Sensor Notes

Fits 2021-2026 Ford Bronco 2-door only, all trims. Does NOT fit 4-door models. Does NOT fit Ford Bronco Sport. For 4-door, see MPBR-08.

Install manual
Military discount

Active duty, veterans and families

Not ready yet?

Order or email contact@broncoforge.com and we'll review your year, trim, door configuration, and any other fitment details relevant to the product so you can avoid any surprises later.

1.5 hr
Install time
Bolt-on
Fitment
3mm steel
Material
All 2-door
2021–2026 Ford Bronco

Double-Sided Molle Storage for the Rear Windows

3mm steel panels follow the rear window lines with molle on both sides. M6 slots accept 1/4-inch carriage bolts for mounting beyond standard molle. Hard top removes and reinstalls without pulling the panels off.

Fitment chart

Which Ford Bronco trims and model years this part fits
Trim202120222023202420252026
BaseFitsFitsFitsNot made this yearFitsFits
Big BendFitsFitsFitsFitsFitsFits
Black DiamondFitsFitsFitsFitsNot made this yearNot made this year
Outer BanksFitsFitsFitsFitsFitsFits
BadlandsFitsFitsFitsFitsFitsFits
WildtrakFitsFitsFitsFitsNot made this yearNot made this year
First EditionFitsNot made this yearNot made this yearNot made this yearNot made this yearNot made this year
EvergladesNot made this yearFitsFitsFitsNot made this yearNot made this year
Heritage EditionNot made this yearNot made this yearFitsFitsFitsFits
Stroppe EditionNot made this yearNot made this yearNot made this yearNot made this yearFitsFits
RaptorNot made this yearFitsFitsFitsFitsFits

Fits Doesn't fit – Not made that year

  • Doors: 2-Door

Details

Pocketed 3mm Steel Molle Panels for the Rear Windows of Your 2-Door Bronco

The DV8 Offroad 2-Door Rear Window Pocket Molle Panels mount to multiple points around the rear windows of your 2-door 2021-2026 Ford Bronco and follow the factory window lines for a clean fit. The pocketed design lets you mount gear on both sides of each panel, doubling usable storage without taking up floor space. M6 slots throughout accept 1/4-inch carriage bolts for mounting options beyond standard molle. The panels can run with or without the hard top, and the hard top removes and reinstalls without pulling the panels off. Fully bolt-on, no cutting. 2-door models only.

What It Does
3mm steel panels finished in micro-texture black powder coat. Mount to multiple window points for rigidity. Molle grid on both sides of each panel. M6 carriage bolt slots for additional mounting options. Hard top removal and reinstall does not require panel removal. Fully bolt-on, no cutting. Install rated at 1.5 hours.

Fitment
Fits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 2-door only, all trims. Does NOT fit 4-door Bronco models. Does NOT fit Ford Bronco Sport. For 4-door Broncos, see the DV8 Pocketed Rear Window Molle Panels (MPBR-08).

Before You Order
2-door models only. Not compatible with 4-door Broncos.

What's Included

  • Driver side 2-door rear window pocket molle panel
  • Passenger side 2-door rear window pocket molle panel
  • Full hardware kit

Key Specs

  • Material: 3mm steel
  • Finish: Micro-texture black powder coat
  • Molle mounting: Both sides of each panel
  • M6 carriage bolt slots: Yes
  • Hard top: Runs with or without, no removal needed for top removal
  • Install: Fully bolt-on, no cutting
  • Install time: 1.5 hours
  • Warranty: 1 year
  • SKU: MPBR-12
  • UPC: 810087815172

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

What's Included

  • Driver side 2-door rear window pocket molle panel
  • Passenger side 2-door rear window pocket molle panel
  • Full hardware kit

Specs

Specifications for 2021-2026 Ford Bronco 2-Door Rear Window Pocket Molle Panels | DV8 Offroad
Vehicle2021–2026 Ford Bronco
TrimsAll 2-door
Doors2-Door
FitmentBolt-on
Install time1.5 hr
Material3mm steel
Warranty1 Year
BrandDV8 Offroad
Part numberMPBR-12
GTIN810087815172
Questions

Does this fit the 4-door Bronco?

No. This panel is designed for 2-door models only. For 4-door, see the DV8 Pocketed Rear Window Molle Panels (MPBR-08).

Can I remove the hard top with these installed?

Yes. Hard top removal and reinstallation does not require pulling these panels off.

Can gear be mounted on both sides?

Yes. The pocketed design allows molle accessories on both the front and back faces of each panel.

What are the M6 slots for?

M6 slots accept 1/4-inch carriage bolts for mounting accessories beyond the standard molle grid.

Does this fit the Bronco Sport?

No. Fits the full-size 2021-2026 Ford Bronco 2-door only.

Have a different question? Ask us about this part

Shipping & returns

Ships direct from the manufacturer's warehouse.

Processing time: Same-Day, before 2 PM
Standard delivery: 3–5 business days to the contiguous 48 states

Oversized items (bumpers, roof racks, sliders) ship via freight carrier. Freight deliveries require a signature and delivery appointment — we'll contact you to coordinate.

Free shipping on orders more than $150. We do not ship to Alaska, Hawaii, or international addresses. Tracking is emailed automatically once your order ships.

Lifetime Returns

Days 1-30: Refund to your original payment method, minus a 25% restocking fee.


Day 31 and beyond: Lifetime store credit (minus 25% restocking fee) — never expires, but requires mint condition and photo approval first.

To start a return, email contact@broncoforge.com for an RMA number. Returns without an RMA will not be accepted.

Items must be unused, uninstalled, and in original packaging ($25 minimum purchase). Customer covers return shipping unless the item arrived damaged or incorrect. Custom/special-order, sale/clearance, and installed or worn items are not eligible for return.

Full return policy

California Prop 65 warning

WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Reviews