Raptor Spare Tire License Plate BracketFOR THE 2022–2026 Ford Bronco Raptor

Will This License Plate Mount Fit My Bronco?

2022-2026 Ford Bronco Raptor. Raptor only. Current website SKU RB-LP1-RTR; supplier sheet lists RB1-LP2RAP and description says RB1-LP1-RTR.

What Is This License Plate Mount Designed For?

Secure your rear license plate setup with a spare-tire-mounted bracket that keeps the plate visible and out of the way during trail use.

How Does This License Plate Mount Install?

Check the mounting requirements for your Bronco and the equipment listed above before installation. Follow Turn Offroad's instructions for this exact part, including any required adapters or electrical connections. View the manufacturer installation video or instructions.

Spare-Tire Plate Position

The Raptor bracket relocates the plate to the center of the rear-mounted spare rather than leaving it in a vulnerable bumper position. The supplier data lists an included LED plate light, wiring, hardware, and a tool for removing the bracket when the spare must come off. Check the removal sequence before loading recovery gear around the tire. This is the Raptor application: the standard Bronco bracket is a different product, and the website and supplier sheet currently use different SKU labels for this Raptor part.

Plan the Complete Tailgate Setup

Compare this part with the equipment already fitted to your Bronco's tailgate. Tire diameter alone does not describe the space available: wheel offset, carrier spacers, hinge accessories, and the tire's actual position can change clearance. Work through the complete arrangement before tightening the final hardware. Open the tailgate carefully through its travel and check for contact with the tail light, rear body, bumper, and neighboring accessories. Where an adapter or limiter is specified above, include it in the installation rather than treating it as a cosmetic extra.

Clearance Is Not a Load Rating

A statement that an accessory clears a particular tire or mounts to a carrier does not increase the carrier's weight capacity. Account for the loaded gear as well as the mount itself, and use the limits for the actual carrier, hinge, and accessory system. Containers, lights, flags, and recovery gear can have different mounting requirements even when they attach in the same area. Use the specified attachment points and compatible hardware instead of relying on a nearby opening or a bracket intended for another purpose.

Keep Rear Functions Usable

Check the rear camera view, license-plate visibility, plate illumination, third brake light, and access to the spare after the complete setup is installed. Relocation parts can change where wiring needs to run or how an accessory comes off for service. Leave a practical route for removing the spare and accessing the tailgate hardware. Inspect the fasteners after initial use and after rough-road travel. If you change the wheel, tire, carrier, or another tailgate accessory later, repeat the clearance checks rather than assuming the original arrangement still applies.

Removal Access and Plate Lighting

The source data describes a centered spare-tire plate position with an LED plate light, wiring, hardware, and a removal tool. Keep that tool accessible when traveling so the plate bracket can be removed if the spare is needed. Check the actual wheel and carrier arrangement before installation, especially if spacers or an aftermarket carrier have changed the spare's position. The SKU discrepancy between the sheet and website is recorded above so ordering and future replacement-part checks can reference the same Raptor application.

What's the Warranty?

Coverage depends on the product and component. Review Turn Offroad's warranty terms for registration requirements, covered materials, and exclusions.