Raptor Cold Air Intake with Dry Extendable FilterFOR THE 2022–2026 Ford Bronco

2022-2026 Ford Bronco Raptor Cold Air Intake with Dry Extendable Filter

This S&B intake is offered for the 2022-2026 Ford Bronco with the 3.0L EcoBoost engine. It is a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 75-5168D.

This S&B intake uses a large airbox and an engine-specific airflow path with the filter configuration named in the title. The cotton-cleanable and dry-extendable versions are separate products. Selecting one does not supply both filter types. Choose the maintenance routine you prefer before ordering, then match the engine and model-year range. The Bronco Raptor system is its own 3.0L application rather than a substitute for a regular Bronco kit.

S&B publishes airflow comparisons for its intake systems to show how restriction changes in testing. Those results describe air movement under test conditions, not a guaranteed horsepower increase on every vehicle. The airbox, inlet, and filter work as an assembly, so correctly seating the lid and connections is important. An intake designed for improved airflow still needs a properly fitted filter to keep dirt out of the engine.

Why choose this intake?

• Large airbox paired with the listed filter version
• Engine-specific intake and inlet arrangement
• Choose cotton-cleanable or dry-extendable media by SKU
• Intake design reduces restriction compared with stock
• Raptor kits are listed separately for the 3.0L engine

Filter care

The Dry Extendable element uses no filter oil. Follow S&B’s instructions for extending its service life and replacing it; do not treat it like the cotton-cleanable version. Inspect the housing, element, and sealing edge after dusty trips. A dry element and an oiled element can require different service products even when their airboxes look alike. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.

Installation and fitment

Select this kit by its engine and years, rather than by trim badge alone. The Raptor’s 3.0L engine requires a Raptor-specific intake, and this listing covers that application. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.

Work with the engine cool and follow the instructions for manufacturer part 75-5168D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.

2022-2026 Ford Bronco, 3.0L EcoBoost Raptor only. Does not fit Bronco Sport.

Specifications

What’s included

• (1) Cold Air Intake Tube
• (1) Dry Extendable Air Filter
• (1) Custom Airbox with Clear Lid
• (1) Set of Couplers, Clamps, and Seals
• (1) Complete Installation Hardware Kit

Emissions information

CARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.