2021-2026 Ford Bronco LED Fog Lights (White/Yellow) | Morimoto XB Evo+

Fitment

These fog lights are built by Morimoto for the 2021 Ford Bronco, the 2022 Ford Bronco, the 2023 Ford Bronco, the 2024 Ford Bronco, the 2025 Ford Bronco, and the 2026 Ford Bronco, but only on Broncos with the factory Standard or Capable front bumper. The HD Modular bumper, which many Badlands, Wildtrak, and Sasquatch-package Broncos come with, uses round fog light openings this housing does not fit, and the Bronco Raptor shares that same modular bumper shape. Check which bumper is on the truck before ordering. Standard and Capable bumpers use the factory square-cornered fog light housing this light bolts into, and this is a direct replacement for the halogen unit that ships there from the factory.

Design

This Evo+ version switches between white and yellow output without a separate bulb or a yellow film over the lens. White output comes from Osram Oslon Compact PL chips rated at 1,500 raw lumens and 8,500 candela per light. Yellow output comes from Nichia NCSY131 chips rated at 1,250 raw lumens and 7,000 candela per light. Both colors share the same SAE wide-beam optic, so the beam pattern and width stay consistent no matter which color is selected, a distinction Morimoto notes most switchable fog lights on the market don't manage. The beam spreads 90 degrees total, 45 degrees left to 45 degrees right of center, and both white and yellow modes are SAE J583 F3 and ECE R19 compliant, which Morimoto markets as the only dual-color fog light on the market compliant in both colors. The interior finish is gloss black with a textured pattern, and an integrated aiming adjuster lets the beam height get dialed in after install.

Electronics

Each fog light plugs into the factory H11, H9, or H8 connector, so there's no wiring to cut or splice. Power draw is 20.5 watts per side regardless of which color is active. The housing bolts into the factory fog light opening using the stock mounting points, so the factory wiring and dash switch keep working exactly as before.

Installation

Installation uses the factory mounting screws and connector, so it's a direct bolt-in at the fog light opening with no cutting, drilling, or splicing required. Two 10mm mounting screws per side hold the housing in place, and a matched H11, H9, or H8 connector is included for each light. Morimoto backs this fog light with a ten-year warranty.

The factory halogen fog light on a Standard or Capable bumper Bronco only comes in one color and throws a narrower, dimmer beam than an LED chip. This housing trades that single-color halogen bulb for a chip that switches colors on demand, useful for drivers who want yellow output in snow or heavy fog and white output the rest of the time, without buying two separate fog lights.

Manufacturer country of origin is Taiwan, and each set weighs about 1.7 pounds total, light enough that shipping damage is rarely an issue.

Does NOT fit Ford Bronco Sport.