OEM Hard Top Hinge Light BracketsFOR THE 2021–2026 Ford Bronco

Will This Light Mount Fit My Bronco?

2021-2026 Ford Bronco. OEM hard top hinge mounting only. Pair of brackets. Baja Designs S2 or similar compatible lights, sold separately. Bronco Raptor fitment is unconfirmed.

What Is This Light Mount Designed For?

Position rear-facing lights higher on your Bronco for camp setup, dusty convoy driving, and low-light reversing with hinge brackets built for the OEM hard top. The Turn Offroad OEM Hard Top Hinge Light Brackets fit 2021–2026 Ford Bronco 2-Door and 4-Door models. They are designed around Baja Designs S2 or similar lights and mount to the factory hard top hinge without drilling or trimming.

Features and Equipment

• Place rear lighting above bumper height with brackets that mount at the OEM hard top hinge.
• Preserve the hard top shell with installation that uses existing hinge hardware and avoids cutting or drilling.
• Support common rear-lighting uses with an angle suited for camp lighting, chase lights, recovery work, and reverse-area visibility.
• Keep the install looking clean with routing capability behind the hinge area for a less exposed wiring path.
• Rely on a purpose-built bracket with precision-cut steel construction and a weather-resistant coating.

Compatibility and Setup Details

The brackets are sold as a set of two. Lights not included. These are designed for Baja Designs S2 or similar lights and fit 2021–2026 Ford Bronco 2-Door and 4-Door models with OEM hard top hinge mounting.

How Does This Light Mount Install?

Check the mounting requirements for your Bronco and the equipment listed above before installation. Follow Turn Offroad's instructions for this exact part, including any required adapters or electrical connections. View the manufacturer installation video or instructions.

Plan the Mount and the Light Together

Choose the actual light before assembling your Bronco's mounting system. Nominal lamp size does not describe every housing, bracket, connector, or mounting-stud dimension. Check those dimensions against the positions described above, and allow room behind the light for the plug and a service loop in the cable. If you already own lights, identify their exact model rather than assuming another lamp from the same brand uses the same mount. A bracket provides a location; it does not establish that every light or harness will fit.

Wiring and Switching Requirements

Decide how the added lighting will be powered and switched before installation. A mechanical mount does not include a complete electrical system unless the package contents specifically say so. Use the light manufacturer's specified wiring, protection, and connectors. Route cables away from sharp edges, moving hinges, hot components, and places where a roof panel or hood can pinch them. Leave enough movement for the factory parts that still need to open, close, or come off. Secure the wiring without placing tension on the light's connector.

Check the Finished Installation

After mounting the equipment, verify its aim and clearance with your Bronco parked safely. Confirm that the setup does not obscure a camera, plate, brake light, or another required factory function. Operate the relevant hood, roof, tailgate, or other moving parts through their normal travel. Check that brackets and wiring remain clear throughout that movement. Auxiliary-light functions and allowed use depend on the lamp and installation; a mounting bracket by itself is not approval to operate every lighting mode on public roads.

What's the Warranty?

Turn Offroad covers the structure and craftsmanship of its steel and billet aluminum products against manufacturer defects for the life of the product, with two-year finish coverage. Register the product within 90 days of receiving it. Coverage is for the original purchaser and excludes damage from abuse, accidents, neglect, improper use, and unauthorized modifications. Review the manufacturer's full warranty terms for the claim process and shipping responsibilities.