Fog Pocket Light KitFOR THE 2021–2026 Ford Bronco

The Baja Designs fog pocket light kit replaces the factory fog light pockets on the 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco with the factory modular steel bumper. It also fits the 2022 through 2026 Bronco Raptor. Each side holds three LED lights, so the kit has six lights in total.

What Sits in Each Pocket

Each pocket holds one square Squadron light in the center with two small S2 lights beside it. The Squadron light does most of the work. The S2 lights add more light to the sides and up close. The kit you pick decides which Squadron light sits in the middle.

Four Kit Choices

The Sport kit uses two Squadron Sport lights with a Spot beam at 3,162 lumens each. It adds two S2 Sport lights with a Driving/Combo beam and two S2 Sport lights with a Wide Cornering beam.

The Pro kit uses two Squadron Pro lights with a Spot beam at 4,095 lumens each. It adds two S2 Pro lights with a Driving/Combo beam and two S2 Sport lights with a Wide Cornering beam. This is the brightest kit.

The SAE Fog kits use two Squadron SAE fog lights at 2,420 lumens each, plus four S2 Sport lights. SAE fog lights have a flat, wide beam made to meet the SAE fog light standard. That is the beam built for road use in fog, rain, and dust. You can pick a White or Amber lens for the SAE kit. Amber can be easier on the eyes in fog, dust, and snow.

Built for Rough Trails

The lenses are hard coated polycarbonate. The housings are anodized aluminum, and the bezels are billet aluminum. The brackets and hardware are stainless steel. Baja Designs rates its lights IP69K, so they are waterproof and can handle a pressure washer.

Fitment

This kit is made only for the factory modular steel bumper. It does not fit the factory plastic bumper or the Capable bumper. Baja Designs sells separate kits for those bumpers. The new pocket mounts bolt in where the factory fog pockets were, with no cutting or drilling.

Toggle Switch or Factory AUX Switches

Each kit comes with one of two wiring options. The Toggle Switch version includes a relay wiring kit and a switch you mount in the dash. Baja Designs' install guide calls for a 3/4-inch hole in the dash to mount that switch.

The Upfitter version connects to the factory AUX switches in the overhead console above the mirror. You turn the lights on and off with those buttons, so there is no extra switch to mount. Only pick Upfitter if your Bronco has the factory AUX switches. Look for a row of AUX buttons on the ceiling above the mirror. On the Bronco Raptor, Baja Designs notes the AUX1 and AUX3 wire colors are switched, so follow the Raptor steps in the guide.

Installation

The kit includes left and right pocket mounts, six lights, two wiring kits, splitters, and hardware. Baja Designs includes a step-by-step install guide. Plan on about two hours for the install, including the wiring.

Bronco Forge carries all four kits and both wiring options in one listing. Baja Designs backs the kit with a limited lifetime warranty and a 30-day satisfaction guarantee.