Momentum GT 2.7L Cold Air Intake with Pro DRY S FilterFOR THE 2021–2026 Ford Bronco

2021-2026 Ford Bronco 2.7L Cold Air Intake with Pro DRY S Filter

This aFe intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 50-70081D.

The Momentum GT system pairs a molded intake housing with a filter chosen for this exact application. Its filter-to-housing connection puts the element directly into the enclosure, while the clear inspection window makes the filter easier to check. The housing and intake route are designed around the Bronco engine listed here. This matters because the 2.3L, 2.7L, and Raptor 3.0L versions use different parts even when their outer appearance is similar.

The supplied couplings and clamps secure the airflow path between the housing and the engine connections. Proper seating matters as much as the size of the filter: an air leak or loose connection can undermine the installation. The Momentum GT design uses the vehicle’s factory mounting locations. Keep the housing supported at those mounts rather than letting a coupler carry its weight. Inspect the window seal and filter connection during routine service.

aFe reports up to 13 hp and 20 lb-ft of torque, with 26% more airflow in its testing. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.

Why choose this intake?

• aFe reports up to 13 hp and 20 lb-ft of torque, with 26% more airflow in its testing.
• Momentum GT housing with a filter inspection window
• Engine-specific intake route and factory mounting locations
• Included filter matches the media named in this listing
• Clamps and couplings secure the intake connections
• Serviceable filter for repeated use

Filter care

This version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.

Installation and fitment

Select this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.

Work with the engine cool and follow the instructions for manufacturer part 50-70081D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.

2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport.

Specifications

What’s included

• (1) Cold Air Intake with Pro DRY S Filter

Emissions information

This listing does not establish CARB approval. The supplier identifies emissions restrictions; not for sale or use on California pollution-controlled vehicles where prohibited.