1 / 6
Mishimoto
Part # FB19088
Performance 2.7L Cold Air Intake with Oiled FilterFOR THE 2021–2026 Ford Bronco
$499.95
This part + add-ons
Pay in full
$499.95
Free shipping
Ships from the manufacturer
Fitment checkedWe review every order
WarrantyFully covered
Authorized dealerGenuine parts
No CARB EO on file. Not confirmed for street use in California.
Bronco Forge has been so easy to contact. I've talked to them on a Saturday, texted, and called. They are very responsive and helpful.
Not sure it fits?Send us a photo. We'll check it for you.
Fitment & Sensor Notes
2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the KR Off-Road ARB compressor bracket.
Military discount
Active duty, veterans and families
Not ready yet?
Order or email contact@broncoforge.com and we'll review your year, trim, door configuration, and any other fitment details relevant to the product so you can avoid any surprises later.
1 hr
Install time
Non-Raptor
2021–2026 Ford Bronco
Fitment chart
| Trim | 2021 | 2022 | 2023 | 2024 | 2025 | 2026 |
|---|---|---|---|---|---|---|
| Base | Fits | Fits | Fits | Not made this year | Fits | Fits |
| Big Bend | Fits | Fits | Fits | Fits | Fits | Fits |
| Black Diamond | Fits | Fits | Fits | Fits | Not made this year | Not made this year |
| Outer Banks | Fits | Fits | Fits | Fits | Fits | Fits |
| Badlands | Fits | Fits | Fits | Fits | Fits | Fits |
| Wildtrak | Fits | Fits | Fits | Fits | Not made this year | Not made this year |
| First Edition | Fits | Not made this year | Not made this year | Not made this year | Not made this year | Not made this year |
| Everglades | Not made this year | Does not fit | Does not fit | Does not fit | Not made this year | Not made this year |
| Heritage Edition | Not made this year | Not made this year | Fits | Fits | Fits | Fits |
| Stroppe Edition | Not made this year | Not made this year | Not made this year | Not made this year | Fits | Fits |
| Raptor | Not made this year | Does not fit | Does not fit | Does not fit | Does not fit | Does not fit |
Fits Doesn't fit – Not made that year
- Doors: 2-Door and 4-Door
- Front bumper: Plastic, Capable, Modular, Aftermarket
Details
2021-2026 Ford Bronco 2.7L Cold Air Intake with Oiled Filter
This Mishimoto intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part MMAI-BR27-21.
The Mishimoto Performance intake is built for the twin-turbo 2.7L EcoBoost Bronco. It uses a molded airbox and intake plumbing to change the airflow path while retaining a filter between outside air and the engine. Choose the dry or oiled version according to the element you want to maintain. Both belong to the same engine application, but the filter service process differs.
Mishimoto reports gains of 7.5 horsepower and 7.4 lb-ft of torque in its testing. Those figures are test results rather than a promise for every Bronco. The company also describes a less restrictive intake route and a larger cross-sectional area than the factory arrangement. Changes in intake sound can be noticeable under load. Check nearby accessories before installation, particularly an aftermarket compressor setup that may share space with the housing.
Why choose this intake?
- Designed for the 2.7L EcoBoost Bronco
- Molded airbox and intake plumbing
- Dry or oiled filter supplied as named in the title
- Tested gains reported on the stock calibration
- Mishimoto lifetime warranty subject to manufacturer terms
Filter care
This version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.
Installation and fitment
Select this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.
Work with the engine cool and follow the instructions for manufacturer part MMAI-BR27-21. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.
2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the KR Off-Road ARB compressor bracket.
Specifications
| Brand | Mishimoto |
|---|---|
| Manufacturer part number | MMAI-BR27-21 |
| Supplier SKU | FB19088 |
| Vehicle | 2021-2026 Ford Bronco |
| Engine | 2.7L EcoBoost |
| Filter type | Oiled |
| Intake tube material | Plastic |
| Tuning | No Tune Required |
What’s included
- (1) Cold Air Intake with an Oiled Filter
Emissions information
CARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.
What's Included
- (1) Cold Air Intake with an Oiled Filter
Questions
Will this intake fit my Bronco?
2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the KR Off-Road ARB compressor bracket.
Which filter comes with it?
The Oiled Filter configuration identified by manufacturer part MMAI-BR27-21. Other filter configurations are sold separately.
Does it require an engine tune?
No Tune Required. Match the listed application and follow the installation instructions.
How do I maintain the filter?
This version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element.
Is it approved for California use?
CARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.
Have a different question? Ask us about this part
Shipping & returns
Ships direct from the manufacturer's warehouse.
Processing time:
Standard delivery: 3–5 business days to the contiguous 48 states
Oversized items (bumpers, roof racks, sliders) ship via freight carrier. Freight deliveries require a signature and delivery appointment — we'll contact you to coordinate.
Free shipping on orders more than $150. We do not ship to Alaska, Hawaii, or international addresses. Tracking is emailed automatically once your order ships.
Lifetime Returns
Days 1-30: Refund to your original payment method, minus a 25% restocking fee.
Day 31 and beyond: Lifetime store credit (minus 25% restocking fee) — never expires, but requires mint condition and photo approval first.
To start a return, email contact@broncoforge.com for an RMA number. Returns without an RMA will not be accepted.
Items must be unused, uninstalled, and in original packaging ($25 minimum purchase). Customer covers return shipping unless the item arrived damaged or incorrect. Custom/special-order, sale/clearance, and installed or worn items are not eligible for return.
California Prop 65 warning
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.