Volant
Part # FB25049
Closed Box 2.7L Cold Air Intake with MaxFlow 5 Oiled FilterFOR THE 2021–2026 Ford Bronco
$385.99
This part + add-ons
Pay in full
$385.99
Free shipping
Ships from the manufacturer
Fitment checkedWe review every order
WarrantyFully covered
Authorized dealerGenuine parts
No CARB EO on file. Not confirmed for street use in California.
Bronco Forge has been so easy to contact. I've talked to them on a Saturday, texted, and called. They are very responsive and helpful.
Not sure it fits?Send us a photo. We'll check it for you.
Fitment & Sensor Notes
2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport.
Military discount
Active duty, veterans and families
Not ready yet?
Order or email contact@broncoforge.com and we'll review your year, trim, door configuration, and any other fitment details relevant to the product so you can avoid any surprises later.
1 hr
Install time
Non-Raptor
2021–2026 Ford Bronco
Fitment chart
| Trim | 2021 | 2022 | 2023 | 2024 | 2025 | 2026 |
|---|---|---|---|---|---|---|
| Base | Fits | Fits | Fits | Not made this year | Fits | Fits |
| Big Bend | Fits | Fits | Fits | Fits | Fits | Fits |
| Black Diamond | Fits | Fits | Fits | Fits | Not made this year | Not made this year |
| Outer Banks | Fits | Fits | Fits | Fits | Fits | Fits |
| Badlands | Fits | Fits | Fits | Fits | Fits | Fits |
| Wildtrak | Fits | Fits | Fits | Fits | Not made this year | Not made this year |
| First Edition | Fits | Not made this year | Not made this year | Not made this year | Not made this year | Not made this year |
| Everglades | Not made this year | Does not fit | Does not fit | Does not fit | Not made this year | Not made this year |
| Heritage Edition | Not made this year | Not made this year | Fits | Fits | Fits | Fits |
| Stroppe Edition | Not made this year | Not made this year | Not made this year | Not made this year | Fits | Fits |
| Raptor | Not made this year | Does not fit | Does not fit | Does not fit | Does not fit | Does not fit |
Fits Doesn't fit – Not made that year
- Doors: 2-Door and 4-Door
- Front bumper: Plastic, Capable, Modular, Aftermarket
Details
2021-2026 Ford Bronco 2.7L Cold Air Intake with MaxFlow 5 Oiled Filter
This Volant intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 17003.
The Volant closed-box intake places the supplied filter inside an enclosure instead of leaving a bare cone exposed in the engine bay. This listing identifies a specific filter version; it does not include all of the filters offered across the Volant range. Match DryTech, PowerCore, or MaxFlow 5 to the maintenance approach you want, and verify the engine application before ordering.
The intake housing and the connecting route work together to deliver filtered air to the engine. A secure enclosure and correctly seated connections help the system function as intended. The closed-box design does not make the engine waterproof or change the vehicle’s published operating limits. Look closely at the installation requirements for the engine you own, because the 2.7L instructions can include minor drilling for hose and electrical tie-downs.
Why choose this intake?
- Enclosed filter housing with a closed-box design
- Engine-specific fitment for the listed EcoBoost application
- Supplied filter is the exact version named above
- Plastic intake tube construction
- No engine tune listed as required
Filter care
This version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.
Installation and fitment
Select this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.
Work with the engine cool and follow the instructions for manufacturer part 17003. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components. The supplier describes minor drilling for hose and electrical tie-downs on the 2.7L installation; plan for that step rather than assuming every closed-box kit is a no-drill swap.
2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport.
Specifications
| Brand | Volant |
|---|---|
| Manufacturer part number | 17003 |
| Supplier SKU | FB25049 |
| Vehicle | 2021-2026 Ford Bronco |
| Engine | 2.7L EcoBoost |
| Filter type | Oiled |
| Intake tube material | Plastic |
| Tuning | No Tune Required |
What’s included
- (1) Cold Air Intake System
- (1) Oiled Filter
Emissions information
CARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.
What's Included
- (1) Cold Air Intake System
- (1) Oiled Filter
Questions
Will this intake fit my Bronco?
2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport.
Which filter comes with it?
The MaxFlow 5 Oiled Filter configuration identified by manufacturer part 17003. Other filter configurations are sold separately.
Does it require an engine tune?
No Tune Required. Match the listed application and follow the installation instructions.
How do I maintain the filter?
This version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element.
Is it approved for California use?
CARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.
Have a different question? Ask us about this part
Shipping & returns
Ships direct from the manufacturer's warehouse.
Processing time:
Standard delivery: 3–5 business days to the contiguous 48 states
Oversized items (bumpers, roof racks, sliders) ship via freight carrier. Freight deliveries require a signature and delivery appointment — we'll contact you to coordinate.
Free shipping on orders more than $150. We do not ship to Alaska, Hawaii, or international addresses. Tracking is emailed automatically once your order ships.
Lifetime Returns
Days 1-30: Refund to your original payment method, minus a 25% restocking fee.
Day 31 and beyond: Lifetime store credit (minus 25% restocking fee) — never expires, but requires mint condition and photo approval first.
To start a return, email contact@broncoforge.com for an RMA number. Returns without an RMA will not be accepted.
Items must be unused, uninstalled, and in original packaging ($25 minimum purchase). Customer covers return shipping unless the item arrived damaged or incorrect. Custom/special-order, sale/clearance, and installed or worn items are not eligible for return.
California Prop 65 warning
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.