Pro Performance 2.7L Cold Air Intake with Dry FilterFOR THE 2021–2026 Ford Bronco

2021-2026 Ford Bronco 2.7L Cold Air Intake with Dry Filter

This CVF intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 27BRINT.

The CVF Pro Performance intake combines a five-layer dry element with an intake assembly designed for the listed EcoBoost engine. It keeps the original front air-feed arrangement rather than asking you to select a universal filter and fabricate a mount. The washable element provides a serviceable alternative to a disposable filter. A dry element uses no filter oil, so maintenance should follow the cleaner and drying instructions for that media.

CVF lists this system as using factory mounting points without vehicle modification. Fit the housing securely before tightening the connecting clamps so the parts settle into their intended positions. Airflow measurements help compare restriction under a controlled test, but they do not translate directly into the same percentage increase in horsepower. Keep the engine application and the exact part number in view when comparing the 2.3L and 2.7L versions.

CVF reports 36% more airflow than stock and a measured flow of 310 CFM at 7 inches H2O. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.

Why choose this intake?

• CVF reports 36% more airflow than stock and a measured flow of 310 CFM at 7 inches H2O.
• Washable five-layer dry filter needs no filter oil
• Factory mounting points; no vehicle modification listed
• Retains the original front air-feed arrangement
• Engine-specific Pro Performance intake design
• CVF lifetime warranty subject to manufacturer terms

Filter care

This version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.

Installation and fitment

Select this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.

Work with the engine cool and follow the instructions for manufacturer part 27BRINT. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.

2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport.

Specifications

What’s included

• (1) Air Intake
• (1) Air Filter

Emissions information

CARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.