1 / 5
aFe
Part # FB13756
Momentum GT 2.3L Cold Air Intake with Pro DRY S FilterFOR THE 2021–2024 Ford Bronco
$435.00
This part + add-ons
Pay in full
$435.00
Free shipping
Ships from the manufacturer
Fitment checkedWe review every order
WarrantyFully covered
Authorized dealerGenuine parts
No CARB EO on file. Not confirmed for street use in California.
Bronco Forge has been so easy to contact. I've talked to them on a Saturday, texted, and called. They are very responsive and helpful.
Not sure it fits?Send us a photo. We'll check it for you.
Fitment & Sensor Notes
2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport.
Military discount
Active duty, veterans and families
Not ready yet?
Order or email contact@broncoforge.com and we'll review your year, trim, door configuration, and any other fitment details relevant to the product so you can avoid any surprises later.
45 min
Install time
Non-Raptor
2021–2024 Ford Bronco
Fitment chart
| Trim | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|
| Base | Fits | Fits | Fits | Not made this year |
| Big Bend | Fits | Fits | Fits | Fits |
| Black Diamond | Fits | Fits | Fits | Fits |
| Outer Banks | Fits | Fits | Fits | Fits |
| Badlands | Fits | Fits | Fits | Fits |
| Wildtrak | Fits | Fits | Fits | Fits |
| First Edition | Fits | Not made this year | Not made this year | Not made this year |
| Everglades | Not made this year | Does not fit | Does not fit | Does not fit |
| Heritage Edition | Not made this year | Not made this year | Fits | Fits |
| Raptor | Not made this year | Does not fit | Does not fit | Does not fit |
Fits Doesn't fit – Not made that year
- Doors: 2-Door and 4-Door
- Front bumper: Plastic, Capable, Modular, Aftermarket
Details
2021-2024 Ford Bronco 2.3L Cold Air Intake with Pro DRY S Filter
This aFe intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 50-70082D.
The Momentum GT system pairs a molded intake housing with a filter chosen for this exact application. Its filter-to-housing connection puts the element directly into the enclosure, while the clear inspection window makes the filter easier to check. The housing and intake route are designed around the Bronco engine listed here. This matters because the 2.3L, 2.7L, and Raptor 3.0L versions use different parts even when their outer appearance is similar.
The supplied couplings and clamps secure the airflow path between the housing and the engine connections. Proper seating matters as much as the size of the filter: an air leak or loose connection can undermine the installation. The Momentum GT design uses the vehicle’s factory mounting locations. Keep the housing supported at those mounts rather than letting a coupler carry its weight. Inspect the window seal and filter connection during routine service.
aFe reports up to 5 hp and 8 lb-ft of torque, with 27% more airflow in its testing. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.
Why choose this intake?
- aFe reports up to 5 hp and 8 lb-ft of torque, with 27% more airflow in its testing.
- Momentum GT housing with a filter inspection window
- Engine-specific intake route and factory mounting locations
- Included filter matches the media named in this listing
- Clamps and couplings secure the intake connections
- Serviceable filter for repeated use
Filter care
This version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.
Installation and fitment
Select this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.
Work with the engine cool and follow the instructions for manufacturer part 50-70082D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.
2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport.
Specifications
| Brand | aFe |
|---|---|
| Manufacturer part number | 50-70082D |
| Supplier SKU | FB13756 |
| Vehicle | 2021-2024 Ford Bronco |
| Engine | 2.3L EcoBoost |
| Filter type | Dry |
| Intake tube material | Plastic |
| Tuning | No Tune Required |
What’s included
- (1) Cold Air Intake
Emissions information
CARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.
What's Included
- (1) Cold Air Intake
Questions
Will this intake fit my Bronco?
2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport.
Which filter comes with it?
The Pro DRY S Filter configuration identified by manufacturer part 50-70082D. Other filter configurations are sold separately.
Does it require an engine tune?
No Tune Required. Match the listed application and follow the installation instructions.
How do I maintain the filter?
This version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way.
Is it approved for California use?
CARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.
Have a different question? Ask us about this part
Shipping & returns
Ships direct from the manufacturer's warehouse.
Processing time:
Standard delivery: 3–5 business days to the contiguous 48 states
Oversized items (bumpers, roof racks, sliders) ship via freight carrier. Freight deliveries require a signature and delivery appointment — we'll contact you to coordinate.
Free shipping on orders more than $150. We do not ship to Alaska, Hawaii, or international addresses. Tracking is emailed automatically once your order ships.
Lifetime Returns
Days 1-30: Refund to your original payment method, minus a 25% restocking fee.
Day 31 and beyond: Lifetime store credit (minus 25% restocking fee) — never expires, but requires mint condition and photo approval first.
To start a return, email contact@broncoforge.com for an RMA number. Returns without an RMA will not be accepted.
Items must be unused, uninstalled, and in original packaging ($25 minimum purchase). Customer covers return shipping unless the item arrived damaged or incorrect. Custom/special-order, sale/clearance, and installed or worn items are not eligible for return.
California Prop 65 warning
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.