2022-2026 Ford Bronco Raptor Rock Fighter Front Bumper | Addictive Desert Designs

Fitment

This front bumper is built by Addictive Desert Designs for the Ford Bronco Raptor, covering the 2022, 2023, 2024, 2025, and 2026 model years, 4-door only. It is a bolt-on part with no cutting or drilling into the frame. Unlike a standard-width bumper adapted to fit a wider vehicle, the Rock Fighter Raptor front bumper is built around the Raptor's own track width and fender flares from the start, so the fitment at the corners and around the wheel openings matches the factory lines instead of leaving gaps.

Design

The Rock Fighter is built for heavy trail use, pairing a low profile top hoop with clearance and approach angles that go well beyond what the factory Raptor bumper offers. It is finished in a hammer black powder coat with satin black powder coat accent panels on the lower sections, a two-tone treatment that also shows up on the standard Bronco version of this bumper. The overall shape is drawn to flow with the contours of the Raptor's flared fenders, so the transition from bumper to fender reads as one continuous line rather than a bolt-on afterthought.

Protection

A vented bumper skid plate runs underneath the bumper itself, with louvers cut into it so airflow keeps reaching the intercooler instead of getting blocked off by a solid sheet of steel. That matters specifically on the Raptor, where the turbocharged engine relies on that airflow more than the naturally aspirated Bronco trims do. For owners who want more underbody coverage than what's built into the bumper, Addictive Desert Designs also sells a dedicated 3/16-inch aluminum Rock Fighter skid plate as a separate accessory, matched to this bumper's mounting points.

Recovery

Two reinforced clevis mounts take 3/4-inch D-ring shackles, giving the front end rated recovery points instead of relying on tow hooks alone. These mounts sit low and tucked in behind the bumper face, keeping them out of the way during normal driving while still being accessible when a strap or shackle is needed on the trail.

Lighting Compatibility

The center of the bumper accepts a 20-inch radius LED light bar or up to five cube-style lights through a universal mount, the same lighting layout used on the standard Bronco Rock Fighter bumper, sized here to sit correctly inside the Raptor's wider opening. There's no need to source Raptor-specific lighting brackets separately since the mounting hardware is built into the bumper itself.

Electronics

Parking sensor cutouts are built into the face of the bumper, so the factory sensors go back into their original locations rather than getting relocated or disabled. Raptors equipped with Adaptive Cruise Control will need a relocation bracket, sold separately, to keep that feature working normally once this bumper replaces the factory unit; without it, the sensor loses its factory mounting point.

Installation

Installation is a bolt-on job with no cutting or drilling required, using the factory mounting points as the attachment locations throughout. Expect it to take roughly the same amount of shop time as other full-width Raptor bumper installs. Bronco Forge stocks this Addictive Desert Designs front bumper for 2022, 2023, 2024, 2025, and 2026 Ford Bronco Raptor owners who want a Rock Fighter build sized specifically for the Raptor's proportions rather than a standard Bronco bumper stretched to cover the gap.