{"product_id":"350a-winch-power-interrupt-kit-bulldog-winch","title":"350A Winch Power Interrupt Kit | Bulldog Winch","description":"\u003ch2\u003eSwitched Power Control for a Compatible Accessory Circuit\u003c\/h2\u003e\n\u003cp\u003eThe Bulldog Winch Power Interrupt Kit gives a compatible electrical accessory a cabin-operated power disconnect. A solenoid switches the main cable, and the included illuminated control switch operates that solenoid. The manufacturer identifies this part as its 350A Power Interrupt Kit, part 20038B. It is a universal wiring product rather than a Bronco-specific plug-in harness, so the electrical requirements and mounting arrangement need to be checked for the intended installation.\u003c\/p\u003e\n\u003ch3\u003ePower Enable Is Separate from Winch Operation\u003c\/h3\u003e\n\u003cp\u003eThe interrupt kit provides an on\/off function for the connected supply. It does not command a winch to pull in, spool out, or release its clutch. Those functions remain with the winch's own controls. This distinction matters when planning an overhead AUX-switch setup: a single AUX switch can be part of a suitable solenoid control circuit, but it is not a replacement for the winch's direction-control remote.\u003c\/p\u003e\n\u003cp\u003eThe main current path and switch-control path are also separate. The large accessory cable passes through the switching device, while smaller control wiring operates it. Do not route winch motor current through the Bronco's factory AUX wiring. Any adaptation to an existing vehicle switch needs to follow the kit and vehicle requirements, including appropriate circuit protection and the correct control connections.\u003c\/p\u003e\n\u003ch3\u003eIncluded Switch and Installation Components\u003c\/h3\u003e\n\u003cp\u003eBulldog supplies a laser-etched illuminated switch, an under-dash mounting bracket, and a 10A circuit breaker with the interrupt assembly. The switch face gives the cabin control a clear, purpose-made label. The mounting bracket provides an option for locating that control without treating the kit as a vehicle-specific dashboard insert.\u003c\/p\u003e\n\u003cp\u003eThe included 10A breaker is a control-circuit component, not a statement that a winch motor can run from a 10A supply. Likewise, the manufacturer's 350A product designation should not be used by itself to approve an unknown winch. Confirm the applicable current and duty requirements before choosing an interrupt device for a particular motor and recovery setup.\u003c\/p\u003e\n\u003ch3\u003eCheck the Complete Electrical Installation\u003c\/h3\u003e\n\u003cp\u003eDecide where the solenoid will mount and where the main cable will run before installation. The mounting surface must support the assembly, and the cable route must avoid sharp edges, heat, and moving components. Check the available battery connection, terminal size, cable length, and space around the intended mounting location. Additional correctly specified cabling or terminals may be needed for a custom layout.\u003c\/p\u003e\n\u003cp\u003eUniversal fitment does not mean every vehicle or winch uses the same wiring. A Bronco's trim, roof, and door configuration do not establish that a particular winch current demand is suitable for this kit. An installer should verify the complete circuit rather than relying on the product's appearance or a pulling-capacity number on the winch housing.\u003c\/p\u003e\n\u003cp\u003eThis listing does not claim manufacturer-confirmed compatibility with either DV8 12,000 lb winch. If that is the intended combination, check the winch's electrical specifications and the interrupt kit's ratings before ordering it as a matched system. For an existing overhead AUX switch, confirm the control arrangement before deciding whether to use the supplied dash switch or integrate the vehicle switch instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBulldog Winch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part\u003c\/th\u003e\n\u003ctd\u003e20038B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer designation\u003c\/th\u003e\n\u003ctd\u003e350A Power Interrupt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eJ171135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eUniversal; electrical and mounting adaptation required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCabin control\u003c\/th\u003e\n\u003ctd\u003eLaser-etched illuminated switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded breaker\u003c\/th\u003e\n\u003ctd\u003e10A control-circuit breaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstall time\u003c\/th\u003e\n\u003ctd\u003e1 Hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower interrupt solenoid assembly\u003c\/li\u003e\n\u003cli\u003eIlluminated control switch\u003c\/li\u003e\n\u003cli\u003eUnder-dash switch mounting bracket\u003c\/li\u003e\n\u003cli\u003e10A circuit breaker\u003c\/li\u003e\n\u003cli\u003eSupplied wiring components and instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bulldog Winch","offers":[{"title":"Default Title","offer_id":67959108829258,"sku":"J171135","price":103.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/20038r2.jpg?v=1794438229","url":"https:\/\/broncoforge.com\/products\/350a-winch-power-interrupt-kit-bulldog-winch","provider":"BRONCO FORGE","version":"1.0","type":"link"}