{"product_id":"2022-2026-ford-bronco-raptor-cold-air-intake-with-oiled-filter-k-n-series-63-aircharger","title":"2022-2026 Ford Bronco Raptor Cold Air Intake with Oiled Filter | K\u0026N Series 63 AirCharger","description":"\u003ch2\u003e2022-2026 Ford Bronco Raptor Cold Air Intake with Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis K\u0026amp;N intake is offered for the 2022-2026 Ford Bronco with the 3.0L EcoBoost engine. It is a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 63-2625.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N builds this intake around the engine application and filter configuration named above. Its molded plastic intake route gives incoming air a different path from the original system. The filter and tube are selected together as a kit, so a filter element by itself is not the same purchase as this intake. The 2.3L, 2.7L, and Raptor versions have different application listings and should not be treated as interchangeable.\u003c\/p\u003e\u003cp\u003eThe intake can make turbo and induction sounds easier to hear as airflow rises under load. That sound change does not tell you how much horsepower the vehicle gained. Any published power result applies to a particular test vehicle and set of conditions. Correct mounting, secure clamps, and intact seals remain essential after installation. Where the system reuses a sensor or vent connection, transfer it exactly as the instructions show rather than leaving a port open.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N lists a tested gain of 27.06 hp at 4,254 rpm and 31.26 lb-ft of torque. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eK\u0026amp;N lists a tested gain of 27.06 hp at 4,254 rpm and 31.26 lb-ft of torque.\u003c\/li\u003e\n\u003cli\u003eMolded plastic intake route for the listed engine\u003c\/li\u003e\n\u003cli\u003eSupplied filter matches this exact kit configuration\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eApplication-specific mounting and connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter with a media-specific cleaning procedure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. The Raptor’s 3.0L engine requires a Raptor-specific intake, and this listing covers that application. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 63-2625. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2022-2026 Ford Bronco, 3.0L EcoBoost Raptor only. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK\u0026amp;N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e63-2625\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB58245\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2022-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e3.0L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Cold Air Intake\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eThis listing does not establish CARB approval. The supplier identifies emissions restrictions; not for sale or use on California pollution-controlled vehicles where prohibited.\u003c\/p\u003e","brand":"K\u0026N","offers":[{"title":"Default Title","offer_id":67937651654730,"sku":"FB58245","price":525.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/kn-bronco-series-63-aircharger-cold-air-intake-63-2625.FB58245.webp?v=1794255414","url":"https:\/\/broncoforge.com\/products\/2022-2026-ford-bronco-raptor-cold-air-intake-with-oiled-filter-k-n-series-63-aircharger","provider":"BRONCO FORGE","version":"1.0","type":"link"}