{"title":"Suspension \u0026 Drivetrain for the 2021-2026 Ford Bronco","description":"\u003cp\u003eA lifted Bronco only rides right if the suspension geometry underneath it gets corrected to match. This collection covers that side of the build for the 2021-2026 Ford Bronco: billet control arms, track bars, portal axles, skid plates, and everything else that keeps a bronco lift kit or bronco suspension lift kit from turning into compromised alignment and premature tire wear.\u003c\/p\u003e\u003cp\u003eBillet ford bronco control arms replace the factory upper and lower links, front and rear, with a fully adjustable arm built around race-grade heim joints and uniballs instead of a factory rubber bushing. That adjustability is what makes a bronco lift kit actually work right. Lifting the truck changes suspension geometry and pinion angle, and adjustable control arms are how you dial that geometry back to correct instead of running a lift with compromised alignment and premature tire wear.\u003c\/p\u003e\u003cp\u003eA bronco track bar does a related but different job: it keeps the rear axle centered side to side under the truck as ride height changes, since a stock track bar geometry pushes the axle off-center once you lift. A portal axle system takes yet another approach entirely, adding clearance and gear reduction at the wheel hub instead of at the suspension, which is why a bronco portals search turns up a very different kind of product than a standard bronco with lift kit search.\u003c\/p\u003e\u003cp\u003eSkid plates and mount covers round out this collection, protecting the lower control arm mounts a lift or a hard trail day tends to expose. As this collection grows to include leveling kits, long travel suspension, and shocks, the same rule applies across all of it: check tire size and wheel clearance before you order, since this is drivetrain and suspension hardware, not a bolt-on accessory.\u003c\/p\u003e\u003cp\u003eEvery product at Bronco Forge is verified for fitment on 2021-2026 Ford Bronco trims before it ships. Free shipping on orders over $150. Text \u003ca href=\"tel:9097728050\"\u003e(909) 772-8050\u003c\/a\u003e with your year, trim, and tire size and we confirm the right setup before you order.\u003c\/p\u003e","products":[{"product_id":"2021-2026-ford-bronco-portal-axles-turn-offroad","title":"2021-2026 Ford Bronco Portal Axles | Turn Offroad","description":"\u003ch3\u003eMaximum Ground Clearance and Larger Tire Capability Without Sacrificing Drivability\u003c\/h3\u003e\u003cp\u003eTurn Offroad Bronco Portal Axles deliver true clearance at the wheel hub instead of chasing height with suspension alone, giving you real capability without altering the suspension geometry Ford spent years engineering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTrue Clearance at the Axle\u003c\/strong\u003e\u003cbr\u003ePortals add approximately 4.75 inches of ground clearance at the axle. Since the lift happens at the hub instead of the suspension, you keep factory geometry, a low center of gravity, and the ride quality that makes portals worth the investment over a suspension-only lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIntegrated Gear Reduction\u003c\/strong\u003e\u003cbr\u003eAn 11% gear reduction inside the portal delivers more usable torque at the wheel, less stress on your drivetrain, and a balance of road-friendly drivability and off-road performance built for tires up to 40 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e4-Gear Portal Box Design\u003c\/strong\u003e\u003cbr\u003eLoad spreads more evenly through the box than a standard 3-gear design, improving durability under extreme and repeated load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSerious Materials, Serious Mounting\u003c\/strong\u003e\u003cbr\u003eCNC-machined 7075 aluminum housings pair with hardened 8620 steel gears for long-term strength under real use. Steel thread inserts at every mounting location hold proper torque over time, a feature most competitors reserve for race-only portal setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e66% More Oil Capacity\u003c\/strong\u003e\u003cbr\u003eIncreased oil capacity (16.9 oz) means greater thermal stability, longer service intervals, and fewer oil changes over the life of the system, with an easy-access drain and fill and a double-seal system engineered to stay leak-free.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFull System Compatibility\u003c\/strong\u003e\u003cbr\u003eRetains factory ABS and parking brake function and integrates with OEM systems without compromising functionality. J-hook front rotors improve stopping power, and brake line and electrical extensions are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReady to Install\u003c\/strong\u003e\u003cbr\u003eDelivered as a complete system: front and rear portal assemblies, axle shafts, extensions, brake line extensions, breather and hose, manifold and fittings, wiring extensions for the electric parking brake, inner axle seals, portal windows, front axle nuts, rear installation hardware, and the 30mm socket and 10mm allen needed for install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021-2026 Ford Bronco, 2-door and 4-door, Sasquatch or non-Sasquatch. Does NOT fit the Ford Bronco Raptor. Supports tire sizes from 37 to 40 inches depending on wheel setup. A printable wheel clearance template is available to confirm brake caliper and portal clearance for your specific wheel before ordering.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default","offer_id":43828766801994,"sku":"SUPR-BR1","price":11999.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-2026-ford-bronco-portals-7962312.jpg?v=1784661882"},{"product_id":"2021-2026-ford-bronco-billet-upper-control-arms-turn-offroad","title":"2021-2026 Ford Bronco Billet Upper Control Arms | Turn Offroad","description":"\u003ch3\u003eBillet Aluminum Upper Control Arms Built for 0-3 Inch Lifts\u003c\/h3\u003e\u003cp\u003eTurn Offroad's Billet Upper Control Arms replace the factory stamped steel UCAs with a stronger, fully adjustable arm designed specifically for lifted 2021+ Ford Broncos, correcting the suspension geometry a lift throws off instead of leaving it uncorrected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable for 0-3 Inch Lifts\u003c\/strong\u003e\u003cbr\u003eBuilt-in adjustability covers the most common Bronco lift range, letting you dial suspension geometry back to spec after installing a lift instead of running compromised caster and alignment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRace-Grade Heim Joints\u003c\/strong\u003e\u003cbr\u003eHeim joint ends give you a wider range of motion than a factory ball joint, which means more usable wheel travel and better tire contact on uneven terrain, plus fine adjustment for precise alignment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe First Sealed Uniball UCA Built for the Bronco\u003c\/strong\u003e\u003cbr\u003eTurn Offroad built the first sealed uniball upper control arm for the Bronco platform. The design reuses the OEM ball joint boot and adds a removable dust cap, fully sealing the uniball from dirt and trail debris. That means less maintenance and a longer service life than an exposed uniball design, and the dust cap can be painted to match your build.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Aluminum 6061-T6 Construction\u003c\/strong\u003e\u003cbr\u003eCNC-machined from 6061-T6 billet aluminum for a strong, lightweight arm that reduces unsprung weight for better suspension response. The anodized finish resists corrosion for long-term durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021-2026 Ford Bronco 2-door and 4-door models, excluding Raptor. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePair of billet upper control arms\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061-T6 billet aluminum, anodized finish\u003c\/li\u003e\n\u003cli\u003eJoint type: Sealed uniball with removable dust cap\u003c\/li\u003e\n\u003cli\u003eLift compatibility: 0\" to 3\"\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Turn Offroad","offers":[{"title":"Default","offer_id":43828785938506,"sku":"SUCA-M1","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-billet-upper-control-arms-pair-1262552.jpg?v=1784663152"},{"product_id":"2021-2026-ford-bronco-billet-rear-track-bar-turn-offroad","title":"2021-2026 Ford Bronco Billet Rear Track Bar | Turn Offroad","description":"\u003ch3\u003eBillet Aluminum Rear Track Bar Built for Adjustable Lift Setups\u003c\/h3\u003e\u003cp\u003eTurn Offroad's Billet Aluminum Track Bar replaces the factory rear track bar with an adjustable billet arm that keeps your rear axle centered correctly through a range of lift heights, using race-grade heim joints instead of a factory bushing that wears out under real use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Aluminum 6061-T6 Construction\u003c\/strong\u003e\u003cbr\u003eCNC-machined from 6061-T6 billet aluminum for a strong, lighter alternative to the factory track bar, reducing unsprung weight without giving up strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1.25 Inch Race-Grade Heim Joints and Uniballs\u003c\/strong\u003e\u003cbr\u003eLarger 1.25 inch heim joints and uniballs handle more articulation and load than a standard ball joint, which matters most when the rear axle is working hard on uneven terrain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePolyurethane Bushings\u003c\/strong\u003e\u003cbr\u003ePolyurethane bushings cut out the clunks and clicks a worn factory bushing develops over time, while keeping the ride comfortable on pavement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlush-Mount Grease Zerks\u003c\/strong\u003e\u003cbr\u003eBuilt-in grease zerks sit flush with the bar for quick, easy lubrication of the heim joints and uniballs during regular maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable From Stock to 3 Inch Lifts\u003c\/strong\u003e\u003cbr\u003eLength adjustment covers stock ride height up to a 3 inch lift, so the rear axle stays properly centered under the truck instead of pulled off to one side as lift height changes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemovable, Paintable Dress-Up Plates\u003c\/strong\u003e\u003cbr\u003eDress-up plates come off for painting to match your build, and add a finished look to the installed bar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021-2026 Ford Bronco 2-door and 4-door models. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminum rear track bar\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eJoint size: 1.25\" heim joints and uniballs\u003c\/li\u003e\n\u003cli\u003eBushings: Polyurethane\u003c\/li\u003e\n\u003cli\u003eLift compatibility: Stock to 3\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Turn Offroad","offers":[{"title":"Default","offer_id":43828787249226,"sku":"SUTB-M1","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-billet-aluminum-track-bar-7990693.jpg?v=1784663295"},{"product_id":"2021-2026-ford-bronco-billet-rear-lower-control-arms-turn-offroad","title":"2021-2026 Ford Bronco Billet Rear Lower Control Arms | Turn Offroad","description":"\u003ch3\u003eBillet Aluminum Rear Lower Control Arms Built for Stock to Lifted Setups\u003c\/h3\u003e\u003cp\u003eTurn Offroad's Billet Rear Lower Control Arms replace the factory rear lower links with a fully adjustable billet arm, keeping suspension geometry correct whether you're running stock ride height or a serious lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable for Various Lift Heights\u003c\/strong\u003e\u003cbr\u003eBuilt-in adjustability tailors to your specific suspension setup, so geometry stays correct from stock all the way through a heavily lifted build instead of being locked to one ride height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMassive 1.25 Inch Heim Joints\u003c\/strong\u003e\u003cbr\u003eLarge 1.25 inch heim joints and uniballs deliver smooth articulation on uneven terrain, giving you more usable wheel travel than a factory rubber bushing allows.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Aluminum 6061-T6 Construction\u003c\/strong\u003e\u003cbr\u003eCNC-machined from 6061-T6 billet aluminum for a strong, lightweight arm that reduces unsprung weight and improves suspension responsiveness. The anodized finish resists corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePolyurethane Bushings\u003c\/strong\u003e\u003cbr\u003ePolyurethane bushings absorb vibration and cut out the clicks and clacks a worn factory bushing develops, while keeping the ride comfortable on pavement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlush-Mount Grease Zerks\u003c\/strong\u003e\u003cbr\u003eBuilt-in grease zerks sit flush with the arm for quick, easy lubrication of the heim joints during regular maintenance, without disassembling the suspension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021-2026 Ford Bronco 2-door and 4-door models, excluding Raptor. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePair of billet rear lower control arms\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061-T6 billet aluminum, anodized finish\u003c\/li\u003e\n\u003cli\u003eJoint size: 1.25\" heim joints and uniballs\u003c\/li\u003e\n\u003cli\u003eBushings: Polyurethane\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Turn Offroad","offers":[{"title":"Default","offer_id":43828792229962,"sku":"SULL-M1","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-billet-lower-control-arms-pair-6607950.jpg?v=1784663431"},{"product_id":"2021-2026-ford-bronco-billet-rear-upper-control-arms-turn-offroad","title":"2021-2026 Ford Bronco Billet Rear Upper Control Arms | Turn Offroad","description":"\u003ch3\u003eBillet Aluminum Rear Upper Control Arms for Stock to Lifted Setups\u003c\/h3\u003e\u003cp\u003eTurn Offroad's Billet Rear Upper Control Arms replace the factory rear upper links with a fully adjustable billet arm, correcting suspension geometry and pinion angle whether you're running stock ride height or a lifted setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRace-Grade Heim Joints and Uniballs\u003c\/strong\u003e\u003cbr\u003e1.25 inch heim joints and uniballs give the suspension more range of motion than a factory rubber bushing, helping all four wheels keep contact with the ground on uneven terrain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Aluminum 6061-T6 Construction\u003c\/strong\u003e\u003cbr\u003eCNC-machined from 6061-T6 billet aluminum for a strong, lightweight arm that holds up to real off-road use without adding bulk or unsprung weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePolyurethane Bushings\u003c\/strong\u003e\u003cbr\u003ePolyurethane bushings absorb vibration and cut out the clicks and clacks a worn factory bushing develops, so the ride stays quiet and comfortable on pavement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable for Various Lift Heights\u003c\/strong\u003e\u003cbr\u003eFully adjustable to accommodate different lift setups, so suspension geometry stays correct whether your Bronco is stock or lifted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlush-Mount Grease Zerks\u003c\/strong\u003e\u003cbr\u003eBuilt-in grease zerks make it easy to lubricate the heim joints and bushings without disassembling the suspension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021-2026 Ford Bronco 2-door and 4-door models, excluding Raptor. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePair of billet rear upper control arms\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eJoint size: 1.25\" heim joints and uniballs\u003c\/li\u003e\n\u003cli\u003eBushings: Polyurethane\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Turn Offroad","offers":[{"title":"Default","offer_id":43828799111242,"sku":"SUUL-M1","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-billet-rear-upper-control-arms-pair-9015037.jpg?v=1784663509"},{"product_id":"2021-2026-ford-bronco-billet-lower-control-arm-mount-covers-turn-offroad","title":"2021-2026 Ford Bronco Billet Lower Control Arm Mount Covers | Turn Offroad","description":"\u003ch3\u003eBillet Aluminum Covers That Clean Up the Factory Lower Control Arm Mounts\u003c\/h3\u003e\u003cp\u003eTurn Offroad's Billet Lower Control Arm Mount Covers conceal the factory lower control arm mounts for a cleaner, more finished look under your Bronco. This is a cosmetic upgrade, not a structural or protective part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6061-T6 Billet Aluminum, Anodized\u003c\/strong\u003e\u003cbr\u003eCNC-machined from 6061-T6 billet aluminum with an anodized finish that resists corrosion and holds up to trail exposure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemovable, Paintable Red Cap\u003c\/strong\u003e\u003cbr\u003eThe center cap comes off for painting, so you can match it to your Bronco's color or run a custom shade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePairs With the SUSK-M4 Skid Plate\u003c\/strong\u003e\u003cbr\u003eDesigned to complement Turn Offroad's SUSK-M4 skid plate for a matching undercarriage look, though each part is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy Bolt-On Installation\u003c\/strong\u003e\u003cbr\u003eInstalls without major modification or special tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021-2026 Ford Bronco 2-door and 4-door models, excluding Raptor. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePair of lower control arm mount covers\u003c\/li\u003e\n\u003cli\u003eRemovable red center caps\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061-T6 billet aluminum, anodized\u003c\/li\u003e\n\u003cli\u003eCap: Removable, paintable\u003c\/li\u003e\n\u003cli\u003eSold as: Pair\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Turn Offroad","offers":[{"title":"Default","offer_id":43828801241162,"sku":"SULM-M1","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-billet-lower-control-arm-mount-covers-pair-4546317.jpg?v=1784663625"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/collections\/cool_dirt_background-compressed_c9cc890e-0381-48da-9243-849393a522f4.png?v=1784662871","url":"https:\/\/broncoforge.com\/collections\/suspension-drivetrain-for-the-2021-2026-ford-bronco.oembed","provider":"BRONCO FORGE","version":"1.0","type":"link"}