{"title":"Protection Parts for the 2021-2027 Ford Bronco","description":"\u003cp\u003eFord Bronco armor and protection parts by the area of the vehicle you want to cover. Available options differ in front and rear bumpers, rock sliders, rocker armor, skid plates, and related body or mounting protection. A useful armor plan begins with the trails you drive and the factory equipment already on the Bronco, rather than replacing every original component at once.\u003c\/p\u003e\u003cp\u003eFront-end protection, lower-side coverage, and underbody skids address different contact points. Each listing specifies part's structure, mounting, and intended job before comparing thickness or appearance. A cosmetic body overlay is not the same product as a structural rock slider, and a dropped side step is not automatically a recovery or lifting point. Bumper-mounted recovery equipment also needs the provisions and ratings stated for its exact assembly.\u003c\/p\u003e\u003cp\u003eChoose \u003ca href=\"\/collections\/ford-bronco-bumpers\"\u003eBronco bumpers\u003c\/a\u003e for front and rear work, \u003ca href=\"\/collections\/ford-bronco-rock-sliders\"\u003erock sliders and rocker armor\u003c\/a\u003e for the lower sides, and \u003ca href=\"\/collections\/ford-bronco-skid-plates\"\u003eskid plates\u003c\/a\u003e for exposed components underneath. When combining armor, review the shared brackets, adjoining panels, factory skids, and electronics requirements. The individual application determines model years, door configuration, and Raptor compatibility. Available options differ in the supplied coverage with the parts already installed so that two upgrades do not compete for the same mounting space.\u003c\/p\u003e\u003cp\u003eProtection is most valuable at the points likely to meet rocks or ruts on the trails the vehicle uses. Added metal also changes vehicle weight and ground clearance, making the location and mounting of each piece more important than the appearance of a complete armor package.\u003c\/p\u003e\u003ch2\u003e6th-Gen Ford Bronco Fitment\u003c\/h2\u003e\u003cp\u003eThis collection may include parts for the \u003cstrong\u003e2021, 2022, 2023, 2024, 2025, 2026, and 2027 Ford Bronco\u003c\/strong\u003e.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore trims:\u003c\/strong\u003e Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-road and specialty models:\u003c\/strong\u003e Everglades, Bronco Raptor, Stroppe Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeritage and limited editions:\u003c\/strong\u003e First Edition, Heritage Edition, Heritage Limited Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2027 special models:\u003c\/strong\u003e Bronco RTR and Bronco Filson\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment varies by model year, trim, door count, roof type, factory bumper, and package. Individual product listings provide specific compatibility details for the Bronco configuration involved.\u003c\/p\u003e","products":[{"product_id":"dv8-tube-series-front-bumper-ford-bronco-raptor","title":"2022-2027 Ford Bronco Raptor Front Bumper | DV8 Offroad Tube Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Tube Series Bronco Raptor front bumper, FBFR-02, is built for 2022–2026 Ford Bronco Raptor four-door models. It is the Raptor-specific version, not the standard-Bronco FBBR-08. The supplied full skid replaces the factory skid plate, and the factory fog lights do not transfer.\u003c\/p\u003e\u003cp\u003eDV8's current application ends at 2026. Confirm compatibility before ordering for a 2027 Bronco Raptor rather than assuming that the earlier-year listing covers it.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis bumper suits a Bronco Raptor build focused on a prerunner appearance, front-end clearance, and a broad range of lighting layouts. The tube design keeps the visual emphasis on the Raptor's stance, with contrasting skid panels and an orange R accent.\u003c\/p\u003e\u003cp\u003eChoose it for those features and its steel recovery hooks. If your priority is an integrated winch mount, compare the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco-raptor\"\u003eRaptor Spec Series winch bumper\u003c\/a\u003e. The two bumpers serve different build priorities even though both add skid protection.\u003c\/p\u003e\n\n\u003ch2\u003eTube Design and Vented Skid Protection\u003c\/h2\u003e\n\u003cp\u003eThe assembly uses steel plate and tubing, finished in micro-texture black powder coat. Gray skid panels, CNC logo end caps, and the orange R panel distinguish this version from the standard Bronco tube bumper.\u003c\/p\u003e\u003cp\u003eA vented full skid covers the area below the bumper. Its openings preserve airflow through that section while the plate provides a barrier against trail debris. The high, tight bumper shape is intended to provide room around rocks and ledges without placing a large plate face far ahead of your Bronco.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eSeveral mounting locations let you build the lighting around your needs. The center, wings, and push bar have different capacities, so choose the location along with the light.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter:\u003c\/strong\u003e A 20-inch dual-row bar plus a pair of 3-inch pods, or six 3-inch pods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide mounts:\u003c\/strong\u003e One 3-inch pod per side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded push bar:\u003c\/strong\u003e A 20-inch single- or dual-row bar, four 7-inch round lights, or eight 3-inch pods.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese are mounting provisions. Lights and their required wiring are purchased separately.\u003c\/p\u003e\n\n\u003ch2\u003ePush Bar, Camera, and ACC Requirements\u003c\/h2\u003e\n\u003cp\u003eThe push bar is included, but installing it is optional. Running it partially obstructs the factory front camera. DV8 lists the ABBR-05 camera-relocation kit for the Bronco and Bronco Raptor Tube Series bumpers with the push-bar option.\u003c\/p\u003e\u003cp\u003eYour Bronco Raptor's adaptive cruise control requires the separately sold ABBR-01 relocation bracket. Factory parking sensors are retained. Plan the hoop, camera, and ACC parts together so you can complete the electronics work while the front bumper is apart.\u003c\/p\u003e\n\n\u003ch2\u003eHow Do the Recovery Hooks Mount?\u003c\/h2\u003e\n\u003cp\u003eThe supplied solid steel recovery hooks bolt directly to the frame. They preserve front recovery attachment options as the factory bumper assembly is replaced. Select compatible recovery gear and inspect the attachment hardware as directed during installation.\u003c\/p\u003e\u003cp\u003eThe hooks and lighting mounts have different jobs. Avoid treating a tube or light bracket as a recovery point; use the designated recovery attachments.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates roughly four hours for the bolt-on installation, with help needed to remove and position the bumpers. The \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBFR-02_Install_Guide.pdf?v=16428136882373551109\"\u003eFBFR-02 installation guide\u003c\/a\u003e walks through assembly and sensor transfer. It notes that some sensor-bezel tabs may need careful trimming, even though the bumper mounting itself requires no cutting.\u003c\/p\u003e\u003cp\u003eArrange your selected lights and relocation parts before starting. Adding them during assembly can make routing the wiring easier to plan.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Raptor Tube Series bumper assembly, full skid, steel recovery hooks, optional bolt-on push bar, accent panels, and installation hardware. Auxiliary lights and the ACC and camera relocation brackets are separate purchases. Check the guide for the detailed hardware inventory.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 backs the bumper with a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Keep your receipt and consult the full warranty terms for coverage limits and the claim process.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43524584964170,"sku":"FBFR-02","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbfr-02-tube-series-bumper-uninstalled-product-shot.jpg?v=1788231572"},{"product_id":"dv8-tube-push-bar-ford-bronco-modular-bumper","title":"2021-2027 Ford Bronco Modular Bumper Tube Push Bar | DV8 Offroad","description":"\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eBuilt for the 2021-2027 Ford Bronco with the factory Heavy-Duty Modular bumper. It does not fit the Capable or plastic bumper.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eBronco owners keeping the factory Heavy-Duty Modular bumper who want a taller push-bar look and several ways to mount front lighting.\u003c\/p\u003e\n\u003ch2\u003eDesign \u0026amp; Lighting\u003c\/h2\u003e\n\u003cp\u003eThe Tube Push Bar bolts to the factory Heavy-Duty Modular bumper and adds a low-profile prerunner-style hoop. It can hold one 20-inch light bar, eight 3-inch pods, or four 7-inch round lights.\u003c\/p\u003e\n\u003ch2\u003eCamera \u0026amp; Fitment\u003c\/h2\u003e\n\u003cp\u003eA camera relocation bracket is included so the factory front camera can stay usable. This bar is for the factory Heavy-Duty Modular bumper only; it does not fit the Capable or plastic bumper.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation uses existing mounting points with no drilling. DV8 lists about 2.5 hours for installation.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43531580702794,"sku":"LBBR-10","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/ecszY_5A.jpg?v=1776812766"},{"product_id":"ford-bronco-tube-series-front-bumper","title":"2021-2027 Ford Bronco Front Bumper | DV8 Offroad Tube Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Tube Series Bronco front bumper, FBBR-08, fits 2021–2026 Ford Bronco two-door and four-door models, excluding Raptor. It replaces the factory front bumper and skid plate, with a full front skid supplied as part of the new assembly. Factory fog lights do not transfer to this bumper.\u003c\/p\u003e\u003cp\u003eFor a Raptor, choose the \u003ca href=\"\/products\/dv8-tube-series-front-bumper-ford-bronco-raptor\"\u003eRaptor Tube Series bumper\u003c\/a\u003e. DV8 currently lists this standard-Bronco version through 2026; confirm a 2027 application before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose this bumper if your Bronco build centers on front-end clearance, a tube-style appearance, and flexible trail lighting. The open tubular layout gives it a different look from the plate-style OE Plus bumpers, while the included skid covers the area underneath.\u003c\/p\u003e\u003cp\u003eIts included light hoop can be installed or left off, giving you a meaningful choice in both appearance and lighting capacity. Owners prioritizing a built-in winch mount should compare the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco\"\u003eSpec Series winch bumper\u003c\/a\u003e before deciding.\u003c\/p\u003e\n\n\u003ch2\u003eHigh Clearance with a Full Skid\u003c\/h2\u003e\n\u003cp\u003eThe Tube Series combines steel tubing with 3.5mm and 5mm steel construction. Its high-clearance shape is designed to reduce the chance of the front bumper catching on technical trail obstacles. A micro-texture black powder coat and metallic gray accent panels finish the assembly.\u003c\/p\u003e\u003cp\u003eThe supplied front skid replaces your Bronco's original plate. Solid steel recovery points provide front recovery attachment locations. These features are part of the bumper design; choose recovery equipment suited to those attachment points and the recovery you are performing.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eThe bumper has separate center and wing mounting positions. That lets you select a main forward light arrangement while adding pods farther out on the bumper.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter:\u003c\/strong\u003e One 20-inch dual-row light bar or six 3-inch pods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWings:\u003c\/strong\u003e One 3-inch pod on each side, two total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded light hoop:\u003c\/strong\u003e One 20-inch single- or dual-row bar, four 7-inch round lights, or eight 3-inch pods.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLights are separate purchases. Check mounting dimensions and harness requirements for your chosen lights before assembling the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eDoes the Light Hoop Block the Camera?\u003c\/h2\u003e\n\u003cp\u003eInstalling the optional hoop obstructs your Bronco's front camera. Decide whether you want that extra lighting position before planning camera relocation. DV8 lists its ABBR-05 camera-relocation bracket for the FBBR-08 and FBFR-02 Tube Series bumpers with the push-bar option.\u003c\/p\u003e\u003cp\u003eFactory parking sensors are retained, with plugs supplied for vehicles without sensors. Adaptive cruise control requires the separately sold ABBR-01 relocation bracket. These are separate requirements: retaining parking sensors does not remove the need to address ACC or the camera.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about 4.5 hours for this bolt-on bumper installation. Arrange help for removing the factory bumper and positioning the steel replacement. Plan additional time for accessory wiring and any electronics relocation your Bronco needs.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-08_Install_Guide_Final.pdf?v=5592845093713631300\"\u003eFBBR-08 installation guide\u003c\/a\u003e first. Although the main mounting process requires no cutting, the guide notes that sensor-bezel tabs may need trimming. Test their fit carefully before final assembly.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe bumper assembly includes the full front skid, steel recovery points, bolt-on light hoop, mounting hardware, and sensor-hole plugs. The hoop is included; fitting it is optional. Auxiliary lights, wiring accessories, and the ACC and camera relocation brackets are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty covering defects in materials and workmanship from the purchase date. Review the manufacturer's full terms for limitations and claim requirements, and retain your receipt.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43531869945930,"sku":"FBBR-08","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-08-tube-series-bumper-uninstalled-product-shot.webp?v=1788231529"},{"product_id":"dv8-acc-relocation-bracket-ford-bronco","title":"2021-2026 Ford Bronco Adaptive Cruise Control Relocation Bracket | DV8 Offroad","description":"\u003ch3\u003eKeep Your Bronco's Adaptive Cruise Control Working After the Bumper Swap\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad ABBR-01 Adaptive Cruise Control Relocation Bracket is a required upgrade for 2021-2026 Ford Bronco owners installing any aftermarket bumper that displaces the factory ACC sensor mount. Without this bracket, your adaptive cruise control stops working the moment the new bumper goes on. Works across all Bronco trims including Black Diamond, Badlands, Wildtrak, and Outer Banks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat It Does\u003c\/strong\u003e\u003cbr\u003eThe ABBR-01 moves the ACC sensor module to a new mounting position that clears the aftermarket bumper and restores full adaptive cruise control functionality. Built from steel with a 2-stage micro-texture black powder coat finish. No cutting, no welding. Bolt-on installation rated at 2.5 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco, all trims, 2-door and 4-door. Does NOT fit non-ACC equipped models. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003cbr\u003eConfirm your Bronco has the Adaptive Cruise Control option before purchasing. Requires slight grille modification during install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDV8 ABBR-01 ACC relocation bracket\u003c\/li\u003e\n\u003cli\u003eFull hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: 2-stage micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eInstall time: 2.5 hours, bolt-on\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43535767797834,"sku":"ABBR-01","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/ford-bronco-acc-bracket_697x465_f6ac9852-9a59-4a84-9201-f5e0340002df.webp?v=1776991407"},{"product_id":"dv8-frame-horn-reinforcement-brackets-ford-bronco","title":"2021-2026 Ford Bronco Frame Horn Reinforcement Brackets | DV8 Offroad","description":"\u003ch3\u003eProtect the Bronco Frame Horns Before Your Winch Bumper Puts Them to the Test\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Frame Horn Reinforcement Brackets are built for 2021-2026 Ford Bronco owners running winch-capable bumpers who want to protect the factory frame horn mounts from failing under load. The factory mounting area is a known weak point during hard winching and recovery pulls. These brackets distribute that load across a reinforced 5mm steel plate structure so the frame does not take the hit. Compatible with all trims including the Bronco Raptor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On, No Frame Modifications\u003c\/strong\u003e\u003cbr\u003eInstall is bolt-on and rated at 1 hour. Longer bumper mounting hardware is included for fitment situations where the added bracket thickness requires it. No cutting, no welding, no modifications to the frame. Finished in micro-texture black powder coat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco, all trims, 2-door and 4-door, including Bronco Raptor. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDV8 Frame Horn Reinforcement Brackets\u003c\/li\u003e\n\u003cli\u003eLonger bumper mounting hardware where required\u003c\/li\u003e\n\u003cli\u003eHardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 5mm steel plate\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eInstall time: 1 hour, bolt-on\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43550909464650,"sku":"ABBR-04","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/abbr-04-frame-horn-brackets-set-of-four-product-shot.jpg?v=1788223991"},{"product_id":"dv8-mto-v2-front-bumper-ford-bronco","title":"2021-2027 Ford Bronco Winch Front Bumper V2 | DV8 Offroad MTO Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad MTO V2 Bronco winch front bumper, FBBR-07, fits 2021–2026 Ford Bronco two-door and four-door models. DV8 explicitly includes Bronco Raptor applications from 2022. The bumper replaces the front assembly and retains the factory parking sensors, but factory fog lights do not transfer.\u003c\/p\u003e\u003cp\u003eDV8 currently lists the bumper through 2026. Confirm 2027 fitment before ordering. Skid compatibility also needs attention: reusing the factory skid requires minor trimming, and the optional Low Pro skid is not compatible with Bronco Raptor.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eMTO means Made to Overland. This version suits a Bronco build where you want winch capability with a recessed installation, front recovery attachments, and several lighting positions. The hidden winch mount keeps the recovery equipment tucked into the bumper layout.\u003c\/p\u003e\u003cp\u003eCompared with the non-winch OE Plus options, the MTO V2 is built around adding recovery equipment. Compared with a Tube Series bumper, it gives you a steel plate design with aluminum accents and an included bull bar.\u003c\/p\u003e\n\n\u003ch2\u003eHidden Winch Mount and Recovery Points\u003c\/h2\u003e\n\u003cp\u003eThe internal winch mount accepts a range of winches. Check your specific winch's mounting pattern, case dimensions, and access needs before choosing it. Two 1-inch-thick mounts accept 3\/4-inch D-ring shackles, giving you designated recovery attachment locations alongside the winch provision.\u003c\/p\u003e\u003cp\u003eThis bumper does not fit roller fairleads. DV8 recommends an iron or steel hawse fairlead when using steel cable. Include the correct fairlead in your plan rather than assuming every part of an existing winch setup will transfer.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit the Bumper and Bull Bar?\u003c\/h2\u003e\n\u003cp\u003eThe bumper's main center mount accepts a 20-inch single-row light bar, and its wing positions accept a pair of 3-inch pods, one per side. The included steel bull bar adds room for a 20-inch dual-row bar below it or up to seven 3-inch pods above it.\u003c\/p\u003e\u003cp\u003eThe optional LBUN-02 alternative bull bar has different lighting arrangements, but DV8 restricts that option to vehicles without adaptive cruise control. Choose your bull-bar configuration with your Bronco's electronics in mind. Lights and wiring are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eCamera, ACC, and Skid Requirements\u003c\/h2\u003e\n\u003cp\u003eYour Bronco's parking sensors are retained, but the front camera is obstructed. DV8 specifies its ABBR-03 camera-relocation solution and ABBR-01 ACC relocation bracket to retain the corresponding functions on equipped vehicles. Those parts are separate from the bumper.\u003c\/p\u003e\u003cp\u003eThe factory skid needs minor trimming for clearance. DV8's current listing recommends the SPBR-07 Low Pro skid as an alternative for applicable standard Broncos, while explicitly excluding Raptor from that skid's fitment. Bumper compatibility does not establish compatibility for every accessory paired with it.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe MTO V2 uses 3.5mm and 5mm steel with aluminum accent panels and a micro-texture black powder-coat finish. The combination gives your Bronco a plate-bumper appearance, with contrasting inserts around the lighting layout.\u003c\/p\u003e\u003cp\u003eWelded-in zip-tie tabs provide attachment points for wiring. Use them when organizing accessory harnesses so the winch and light wiring follows a planned route rather than hanging across the bumper openings.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates four to 4.5 hours for installation, with assistance for lifting and positioning the bumper. The assembly bolts on, but factory-skid trimming and possible sensor-bezel tab trimming mean it should not be described as universally modification-free.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-07_Install_Guide_Final.pdf?v=2364220283318980062\"\u003eMTO V2 installation guide\u003c\/a\u003e before starting. Arrange the winch, fairlead, lights, and relocation equipment first so their mounting and wiring can be addressed during assembly.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the bumper assembly, steel bull bar, aluminum accent panels, D-ring mounting points, and installation hardware. The winch, shackles, fairlead, lights, replacement skid, and electronics relocation accessories are separate purchases. Consult the guide for the full hardware inventory.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty against defects in materials and workmanship from the purchase date. Review its full terms for coverage limits and claim requirements, and keep your purchase record.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43550937219146,"sku":"FBBR-07","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-07-mto-v2-bumper-side-profile-product-shot.jpg?v=1788231464"},{"product_id":"dv8-fs-15-rock-sliders-ford-bronco-4-door","title":"2021-2027 Ford Bronco 4-Door Rock Sliders | DV8 Offroad FS-15","description":"\u003ch2\u003eFord Bronco Rock Slider Fitment\u003c\/h2\u003e\u003cp\u003eThese DV8 FS-15 Ford Bronco rock sliders, also called rock rails, run the length of the 4-door rocker area and mount at three points directly to the frame. They are built for 2021-2027 Ford Bronco 4-door models except Bronco Raptor.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\u003cp\u003e4-door Bronco owners who want true frame-mounted rocker protection for rock crawling and trail use instead of a light-duty side step.\u003c\/p\u003e\n\u003ch2\u003eRock Slider Mounting \u0026amp; Construction\u003c\/h2\u003e\u003cp\u003eThe three-point frame mount and large center supports are the main reason to choose these over a body-mounted step. The sliders use 3mm tube steel and 5mm plate steel, giving the rocker area a solid surface to take contact from rocks, ledges, and trail obstacles.\u003c\/p\u003e\n\u003ch2\u003eRocker Panel Protection\u003c\/h2\u003e\u003cp\u003eRock sliders protect the lower body where a bad line can crush or scrape the rocker panel. The full-length 4-door design spreads protection from the front door area through the rear door area instead of leaving the middle of the rocker exposed.\u003c\/p\u003e\n\u003ch2\u003eRock Sliders vs. Side Steps\u003c\/h2\u003e\u003cp\u003eThese are protection-first rock rails, not running boards. If your priority is an easier step into the Bronco, a dedicated side step is the better fit. If you expect the slider to take trail contact, the frame-mounted FS-15 is built for that job.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation is bolt-on with factory hardware and no cutting or drilling. DV8 lists about 3 hours for installation. They are not compatible with DV8 pinch weld covers (SRBR-03).\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43562953048138,"sku":"SRBR-07","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/eNMeY79g.jpg?v=1777773472"},{"product_id":"dv8-fs-15-rock-sliders-ford-bronco-2-door","title":"2021-2027 Ford Bronco 2-Door Rock Sliders | DV8 Offroad FS-15","description":"\u003ch2\u003eFord Bronco Rock Slider Fitment\u003c\/h2\u003e\u003cp\u003eThese DV8 FS-15 Ford Bronco rock sliders are built specifically for the shorter 2-door body. They mount to the frame, replace the factory rock rails or sliders, and cover the rocker area from wheel well to wheel well.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\u003cp\u003e2-door Bronco owners who want frame-mounted rock rails for real rocker protection without giving up tire clearance.\u003c\/p\u003e\n\u003ch2\u003eRock Slider Mounting \u0026amp; Construction\u003c\/h2\u003e\u003cp\u003eDV8 builds the 2-door FS-15 with 3.5mm steel tube and 4mm steel plate. The boxed mounting structure ties the rock slider to the frame so trail contact is carried through the slider structure instead of the Bronco's sheet metal.\u003c\/p\u003e\n\u003ch2\u003eRocker Panel Protection\u003c\/h2\u003e\u003cp\u003eThe full-length rock rails are built to take contact from rocks and ledges while protecting the lower body. DV8 also lists clearance for tires up to 38 inches, so the slider itself does not become the limiting factor on a larger-tire build.\u003c\/p\u003e\n\u003ch2\u003eRock Sliders vs. Side Steps\u003c\/h2\u003e\u003cp\u003eThese are true rock sliders rather than a light-duty step. They can still give you a useful place to plant a foot, but the main reason to buy them is rocker-panel protection when the Bronco drops onto a rock or slides across an obstacle.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation uses factory hardware with no cutting or drilling. The factory sliders or rock rails must be removed first. DV8 lists about 1 hour for installation.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43562981818442,"sku":"SRBR-04","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/XOS_Qcng.jpg?v=1777775084"},{"product_id":"dv8-oe-plus-side-steps-ford-bronco-2-door","title":"2021-2027 Ford Bronco 2-Door Side Steps | DV8 Offroad OE Plus","description":"\u003ch2\u003eFord Bronco Side Step Fitment\u003c\/h2\u003e\u003cp\u003eThese DV8 OE Plus Ford Bronco side steps are built for 2021-2027 2-door Broncos. They replace the factory rock rails or sliders and add a wider, easier step for daily entry and exit.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\u003cp\u003e2-door Bronco owners who want an easier step into the cab, better grip in mud or rain, and a cleaner side profile without the weight of full rock sliders.\u003c\/p\u003e\n\u003ch2\u003eSide Step Design \u0026amp; Grip\u003c\/h2\u003e\u003cp\u003eSteel tube supports carry textured steel step plates with a bike-pedal-style tooth pattern for grip. The design is aimed at daily use, especially on lifted Broncos where the cab is harder to climb into.\u003c\/p\u003e\n\u003ch2\u003eSide Steps vs. Rock Sliders\u003c\/h2\u003e\u003cp\u003eThese are side steps, not frame-mounted rock sliders. They add light protection along the rocker area, but they are built around entry access first. If you expect the side of the Bronco to land on rocks, a true rock slider is the better choice.\u003c\/p\u003e\n\u003ch2\u003eDoor \u0026amp; Tire Fitment\u003c\/h2\u003e\u003cp\u003eThe 2-door version clears tires up to 38 inches. It does not fit 4-door Broncos, and the factory sliders or rock rails must be removed before installation.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation uses included hardware with no drilling required. DV8 lists about 1 hour for installation.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43562986438730,"sku":"SRBR-05","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/5i9pW8UQ.jpg?v=1777775929"},{"product_id":"dv8-oe-plus-side-steps-ford-bronco-4-door","title":"2021-2027 Ford Bronco 4-Door Side Steps | DV8 Offroad OE Plus","description":"\u003ch2\u003eFord Bronco Side Step Fitment\u003c\/h2\u003e\u003cp\u003eThese DV8 OE Plus Ford Bronco side steps fit 2021-2027 4-door Broncos, including Bronco Raptor. The full-length step gives both front and rear passengers a secure place to climb in and out.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\u003cp\u003e4-door Bronco and Bronco Raptor owners who want easier entry for front and rear passengers without moving to a heavy frame-mounted rock slider.\u003c\/p\u003e\n\u003ch2\u003eSide Step Design \u0026amp; Grip\u003c\/h2\u003e\u003cp\u003eThe step uses 2mm steel tube supports with 3mm and 5mm steel plates. A tooth-style tread adds grip for wet or muddy boots, while the micro-texture black powder coat keeps the look close to the factory trim.\u003c\/p\u003e\n\u003ch2\u003eSide Steps vs. Rock Sliders\u003c\/h2\u003e\u003cp\u003eThese are side steps, not heavy-duty rock sliders. They are a better match for daily driving, lifted Broncos, kids, and passengers who need easier cab access. For repeated rock contact, choose a frame-mounted slider instead.\u003c\/p\u003e\n\u003ch2\u003eDoor \u0026amp; Tire Fitment\u003c\/h2\u003e\u003cp\u003eThe 4-door version is built for the longer rocker length and does not fit 2-door Broncos. It works across the listed 4-door Bronco trims, including Raptor.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation is bolt-on with no drilling or body modification required. DV8 lists about 1 hour for installation.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43563050631242,"sku":"SRBR-02","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/oe-plus-series-ford-bronco-side-steps_698x465_32550e43-49d3-4e4e-875b-6d342018eb1e.webp?v=1778205116"},{"product_id":"dv8-low-pro-skid-plate-ford-bronco","title":"2021-2026 Ford Bronco Low Pro Front Skid Plate | DV8 Offroad","description":"\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDV8 Offroad builds this Low Pro Skid Plate for the 2021, 2022, 2023, 2024, 2025, and 2026 Ford Bronco, and it's meant to go on after an aftermarket front bumper is already in place. The stock front bumper and this skid plate don't share mounting points, so running one with the other doesn't work, and the Bronco Raptor is excluded for the same reason: its front end uses a different mount layout entirely. Every other trim and door configuration is covered, from a 2-door Big Bend to a fully loaded 4-door Wildtrak.\u003c\/p\u003e\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eThis plate sits lower and flatter than a full-coverage steel skid, which is the point of building it in the first place. Instead of adding the ride height a heavier skid picks up, it tucks close to the frame and keeps the front end's stance near stock while still covering the crossmember and steering components underneath. Vents cut into the steel keep air moving to the engine bay, so the plate doesn't turn into a heat trap on a slow crawl or a hot trail day. DV8 finishes it in the same micro-texture black powder coat it runs on its other Bronco parts, and four mounting points tie it to the frame rather than relying on a couple of bolts to carry the load. It's also easy to unbolt again if you need quick access to the underside of the engine.\u003c\/p\u003e\n\u003ch3\u003eProtection\u003c\/h3\u003e\n\u003cp\u003eShrubs, rocks, and washed-out trail sections all aim at the same low, exposed area under the engine. This Low Pro Skid Plate is what stands between those obstacles and the crossmember and steering components sitting right behind it, protecting that zone without adding the height a taller, heavier skid would. That matters because the whole point of a low-profile plate is protecting the clearance gained from switching to an aftermarket bumper, not eating into it.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation bolts straight to the factory mounting points on the frame, and no drilling is needed for the plate itself. If your Bronco's factory skid mounts came with built-in D-rings, cut those flush before the plate goes on, since it's built to bolt where the stock hardware already lives rather than add new hardware to the truck. Most owners get it installed in about an hour with basic hand tools. Bronco Forge stocks this DV8 Offroad Low Pro Skid Plate for Bronco owners who already run an aftermarket front bumper and want front undercarriage protection that doesn't work against the clearance they upgraded for. Off-roaders sometimes call this style of part a bash plate rather than a skid plate, same job under a different name, and this one is cut from steel rather than lighter aluminum, so it takes repeated hits without denting through the way a thinner material would after a season of hard trail use. If you're shopping for a Ford Bronco skid plate to run behind an aftermarket bumper without giving up any of the ground clearance that bumper bought you, this is the piece built for that exact job, backed by DV8's 1-year warranty and ready to ship from Bronco Forge.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43576473419850,"sku":"SPBR-07","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/xniIUS-g.jpg?v=1778187432"},{"product_id":"dv8-rear-differential-skid-plate-ford-bronco","title":"2021-2026 Ford Bronco Rear Differential Skid Plate | DV8 Offroad","description":"\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThe factory Ford Bronco ships with no dedicated shield over the rear differential, and DV8 Offroad built this skid plate to close that gap for the 2021, 2022, 2023, 2024, 2025, and 2026 model years. It fits both 2-door and 4-door Broncos across every trim, Sasquatch package or not, since the rear axle and differential housing sit in the same place regardless of body style.\u003c\/p\u003e\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eSolid steel plate branches out from the center of the skid to cover the differential, the gasket seal, and the pinion, then extends further to protect the full length of the rear axle from link mount to link mount. That reach matters on technical terrain, where a rock strike rarely lands exactly on the housing itself; it's just as likely to catch a link mount or the axle tube next to it. DV8 cut several drain holes into the plate so water and mud that collect underneath during a wet crossing or a mud bog have somewhere to go instead of sitting against the housing. The whole piece is finished in a micro-texture black powder coat that matches the rest of the truck's undercarriage hardware, and the flat lower surface is shaped to slide across rock ledges instead of catching an edge and stopping the truck cold.\u003c\/p\u003e\n\u003ch3\u003eProtection\u003c\/h3\u003e\n\u003cp\u003eA direct rock strike on an unprotected rear differential can crack the housing or damage the gasket seal, and either one turns into a fluid leak that ends a trail day early. Once fluid starts draining out, the differential runs dry fast enough to damage the gears before most drivers even notice the leak. This skid plate takes the hit instead, spreading the impact across a wide steel surface rather than concentrating it on the housing's cast aluminum or iron shell. Because the plate covers link mount to link mount, it also backs up the rear suspension's attachment points, an area that doesn't get much thought until something bends there and the alignment goes with it.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation uses the provided hardware and bolts to the factory mounting points with no cutting required. DV8 designed it as a two-person job in most cases, though one person with the right jack support can manage it alone in about an hour. Bronco Forge stocks this DV8 Offroad Rear Differential Skid Plate for Ford Bronco owners heading into rocky terrain where the rear diff would otherwise be the first thing to take a hit. If you're running an aftermarket differential cover, check its dimensions against this plate before ordering, since cover shapes vary enough between manufacturers that a perfect fit isn't guaranteed on every combination. For anyone comparing a Ford Bronco skid plate against the factory setup, this is the piece that covers the one spot the factory undercarriage leaves completely open. Some shops still call this style of part a bash plate rather than a skid plate, and either name points to the same job: taking the impact so the differential underneath doesn't have to. It's built to handle repeated rock strikes over years of trail use rather than a single hard hit, and DV8 backs it with a 1-year warranty.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43576485642314,"sku":"SPBR-03","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/XoW9qqNA.jpg?v=1778188474"},{"product_id":"dv8-steel-front-skid-plate-ford-bronco","title":"2021-2026 Ford Bronco Steel Front Skid Plate | DV8 Offroad","description":"\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDV8 Offroad built this Steel Front Skid Plate to work with both the factory Bronco bumper and DV8's own aftermarket bumpers, which sets it apart from skid plates that only bolt up once a specific bumper is already on the truck. It covers 2021, 2022, 2023, 2024, 2025, and 2026 Ford Broncos across every trim and both door configurations, and it also protects the sway bar disconnect module on Badlands and First Edition trims, a component the factory plastic skid doesn't shield at all.\u003c\/p\u003e\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eThe factory front skid plate on a Bronco is plastic, and plastic cracks and deforms under the kind of moderate rock strikes that steel shrugs off without a mark. This plate is built to cover the same spot with steel instead of plastic, taking hits that would crack or deform the factory piece and staying functional afterward. DV8 finishes it in a micro-texture black powder coat that matches the factory undercarriage color, so it doesn't stand out as an obvious aftermarket part once it's installed. Mounting points line up with the factory locations exactly, which is what lets this plate work under either the stock bumper or a DV8 aftermarket bumper without any adapters or spacers involved.\u003c\/p\u003e\n\u003ch3\u003eProtection\u003c\/h3\u003e\n\u003cp\u003eBecause this skid plate covers the same footprint as the factory plastic piece, it protects the front underbody in the exact spot Ford already identified as vulnerable enough to shield, just with a material that holds up to repeated impact instead of cracking on the first hard strike. Badlands and First Edition owners get an added benefit here: the sway bar disconnect system on those trims sits low and exposed, and this plate extends coverage over it, something the stock plastic skid was never shaped to do. Rocky trail sections that would normally chip away at a plastic skid over a season instead leave this steel version with nothing worse than surface scratches.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation is a direct bolt-on job using the factory mounting points, no cutting or drilling required, and most owners have it installed in about an hour. Bronco Forge stocks this DV8 Offroad Steel Front Skid Plate for Ford Bronco owners who want steel protection at the front underbody without needing to run an aftermarket bumper first. It's a straightforward option for anyone still running the factory plastic skid, whether it's already cracked or you'd rather get ahead of that before a trip. Compared with DV8's Low Pro Skid Plate, which is built specifically to pair with an aftermarket bumper and sit lower for extra clearance, this Steel Front Skid Plate is the heavier-duty option for owners who regularly wheel on rocky terrain and want the most coverage available at the front of the truck, whether they're running the stock bumper or not. DV8 backs the plate with a 1-year warranty, and it ships ready to bolt on with no extra parts to source. For a Bronco that sees regular trail use, running steel here instead of plastic is a cheaper way to avoid a damaged crossmember or a punctured oil pan down the line.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43576574541898,"sku":"SPBR-01","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/IWhREcog.jpg?v=1778196125"},{"product_id":"dv8-trailing-arm-skid-plates-ford-bronco","title":"2021-2026 Ford Bronco Trailing Arm Skids (No OEM Skid) | DV8 Offroad","description":"\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThis pair of Trailing Arm Skid Plates from DV8 Offroad is built for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Broncos whose trailing arm mounts never got a welded factory skid from Ford. Not every Bronco left the factory the same way here. Some trims came with a small welded skid already covering the trailing arm mount, and others didn't, so it's worth checking which version your Bronco has before ordering. DV8 sells a second version of this part, SPBR-05, built specifically for Broncos that already have the factory welded skid in place.\u003c\/p\u003e\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eThe trailing arm mount is one of the lowest hanging frame points on the entire truck, and on a Bronco without the factory welded skid, it sits there with nothing but sheet metal between it and the trail. DV8's wraparound design bolts over that exposed mounting area and takes the impact instead. Getting hung up on a rock at this exact spot is a common complaint among Bronco owners on technical trails, since the trailing arm mount catches obstacles the rest of the undercarriage clears just fine. The skid is finished in a micro-texture black powder coat that complements the rest of the factory undercarriage structure rather than looking like a bolted-on afterthought.\u003c\/p\u003e\n\u003ch3\u003eProtection\u003c\/h3\u003e\n\u003cp\u003eA direct hit on an unprotected trailing arm mount can bend the frame pocket itself, and that kind of damage doesn't stay contained to one spot. A bent frame pocket throws off suspension geometry, which shows up later as uneven tire wear or a truck that pulls to one side on the highway. These skid plates prevent that chain of problems by taking the strike at the mount before it ever reaches the frame metal underneath.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation involves minor drilling and a partial drop of the gas tank skid to get access to the mounting area, so plan on more shop time than a simple bolt-on part, typically around three hours. Bronco Forge stocks this DV8 Offroad Trailing Arm Skid Plate set for Ford Bronco owners whose trailing arm mounts are still exposed from the factory and want that low point covered before it becomes a problem on the trail. Confirm your Bronco's trailing arm setup before ordering, since running this version on a Bronco that already has the OEM welded skid means buying the wrong part for your truck. DV8 backs the pair with a 1-year warranty, and once installed, they're built to stay in place for years of repeated trail use without needing attention. The extra install time up front is a one-time cost, and it closes off one of the more commonly overlooked weak points on a Bronco headed for rock crawling or technical two-track trails. Owners who've already dealt with a bent trailing arm pocket once tend not to skip this step twice. The gas tank drop adds time to the job, but it also means the install can be done in a home garage with a floor jack and a set of stands rather than requiring a lift, so it's within reach for anyone comfortable doing their own suspension work on a weekend.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43576589221962,"sku":"SPBR-06","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-2023-Ford-Bronco-Frame-Side-Trailing-Arm-Skid-Plate_Offtruck-04_0f8377d9-590c-47da-b7f8-5cd1c800996b.webp?v=1778197706"},{"product_id":"dv8-rear-shock-guard-skid-plates-ford-bronco","title":"2021-2026 Ford Bronco Rear Shock Guard Skid Plates | DV8 Offroad","description":"\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eDV8 Offroad builds this pair of Rear Shock Guard Skid Plates for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Broncos, covering both 2-door and 4-door trucks across every trim. They work with most aftermarket shocks and lift kits, including setups running Johnny Joints or Heim connections at the mounting points, though shocks with piggyback reservoirs mounted at the bottom of the shock body need a different solution since the reservoir sits right where this plate would go.\u003c\/p\u003e\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eThe rear shock and lower link mounts sit at the lowest point of the rear axle, which puts them directly in the path of anything the truck slides over on a rocky trail. DV8 built the shock skid and the link mount skid as one welded piece rather than two separate plates, and tying them together this way adds strength at the exact spot where a rock is most likely to catch. A single piece also means fewer seams for an obstacle to hang up on as the truck slides across it. The plates are finished in the same micro-texture black powder coat DV8 uses on its other Bronco undercarriage parts.\u003c\/p\u003e\n\u003ch3\u003eProtection\u003c\/h3\u003e\n\u003cp\u003eExposed rear shock mounts take a beating on rocky terrain, and damage here isn't cosmetic. A bent or cracked shock mount changes suspension geometry and can compromise how the shock itself performs on the next hard hit. These skids protect the mounting hardware and the surrounding frame from direct rock contact, letting the low profile of the design slide the truck across an obstacle rather than catching on it and bringing the truck to a stop mid-trail.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation uses the factory hardware and bolts on with no cutting or drilling required, running about an hour for most owners. Bronco Forge stocks this DV8 Offroad Rear Shock Guard Skid Plate set for Ford Bronco owners running aftermarket shocks or a lift kit who want the shock mounts and lower links protected at the lowest point of the truck. Before ordering, check whether your aftermarket shocks use a bottom-mounted piggyback reservoir, since that configuration won't clear this plate the way a standard shock body does. Everything else, including most common lift kit and aftermarket link setups, fits without modification. DV8 backs the pair with a 1-year warranty against manufacturing defects, and once bolted on, they stay out of sight and out of mind until the day a rock ledge finally puts them to work. Pairing this skid with DV8's front control arm skids and a front skid plate covers the rear and front of the truck with the same design language and finish, so the whole undercarriage matches instead of looking like parts pulled from different brands. Shocks with a remote reservoir mounted separately from the shock body, rather than piggybacked directly on it, clear this skid without any issue, so it's worth checking exactly how a given reservoir mounts rather than ruling this part out based on the shock brand alone. A quick look at the shock body before ordering settles the question either way.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43576616517706,"sku":"SPBR-04","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/8-UlmHEw.jpg?v=1778198466"},{"product_id":"dv8-front-control-arm-skid-plates-ford-bronco","title":"2021-2026 Ford Bronco Front Control Arm Skid Plates | DV8 Offroad","description":"\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThis pair of Front Control Arm Skid Plates from DV8 Offroad fits 2021, 2022, 2023, 2024, 2025, and 2026 Ford Broncos across every trim, including both Sasquatch-equipped and non-Sasquatch trucks. The front lower control arms sit low on every Bronco regardless of trim package, so this fitment covers every body style and door configuration without exception.\u003c\/p\u003e\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eFord builds the Bronco's front lower control arms out of aluminum, and aluminum handles the loads of daily driving and moderate off-roading fine, but it doesn't take a direct rock strike the way steel does. These skid plates bolt directly over the control arm mounting area and the factory shock bolts, standing in as the material that actually meets the rock so the aluminum arm underneath doesn't have to. DV8 builds them from 3.5mm steel and finishes them in a micro-texture black powder coat that matches the rest of the truck's undercarriage.\u003c\/p\u003e\n\u003ch3\u003eProtection\u003c\/h3\u003e\n\u003cp\u003eA direct hit on an unprotected lower control arm pocket can bend the frame there, and once that pocket bends, alignment goes with it. That's an expensive repair on a part of the truck that's hard to inspect without a lift, so most owners don't find out there's a problem until the tires start wearing unevenly weeks or months later. These skids absorb the impact at the mounting area instead, protecting both the control arm itself and the factory shock bolts that share the same exposed spot on the frame.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation is a bolt-on job with the hardware included, no drilling or cutting required, and most owners have both sides done in about an hour. Bronco Forge stocks this DV8 Offroad Front Control Arm Skid Plate set for Ford Bronco owners who wheel on rocky terrain and want the front lower control arms protected before a hard hit turns into a bent frame pocket and an alignment bill. Sasquatch owners and non-Sasquatch owners run the same part here, since the mounting geometry doesn't change between the two setups. DV8 backs the pair with a 1-year warranty, and pairing this skid with a front skid plate or a Low Pro Skid Plate rounds out coverage across the whole front undercarriage rather than leaving the control arms as the one exposed gap. Owners searching for a Ford Bronco skid plate to cover the front suspension specifically, rather than the engine bay or the differential, land on this part for exactly that reason: it's built for one job, protecting the control arm pockets, and it does that job without adding weight anywhere else on the front end. The plates ship as a driver and passenger pair, since a control arm strike on one side of the truck is just as likely as the other, and running only one side would leave the truck with an obvious weak point. Owners who've had a shop quote them for a bent control arm pocket repair usually don't need much convincing that an hour with a wrench up front beats paying that bill later on.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43576655249482,"sku":"SPBR-02","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/bronco-a-arm-skid-plate_698x465_a09191ad-18b9-4a3f-a58e-40e0021af49b.webp?v=1778202709"},{"product_id":"dv8-rear-tube-bumper-ford-bronco","title":"2021-2027 Ford Bronco Rear Tube Bumper | DV8 Offroad","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Bronco rear tube bumper, RBBR-08, is listed for 2021–2026 Ford Bronco models. DV8 lists all trims and includes it in its Bronco Raptor rear-bumper range. The bumper works with the factory hitch and provides clearance for up to a 37-inch spare on the OEM carrier.\u003c\/p\u003e\u003cp\u003eCheck your parking-sensor equipment before ordering: equipped Broncos require the MCFSNSR-01 sensor kit. Confirm a 2027 application separately because DV8's current product listing ends at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis rear bumper suits a Bronco build where you want an open tube-style appearance instead of a broad plate face. Its prerunner design pairs rear light mounts with room for a larger spare, while keeping the factory hitch usable.\u003c\/p\u003e\u003cp\u003eIt is a styling and equipment choice distinct from the \u003ca href=\"\/products\/dv8-spec-series-rear-bumper-ford-bronco\"\u003eSpec Series rear bumper\u003c\/a\u003e, which specifically provides D-ring mounts. If designated rear recovery attachments are a priority, compare that feature before choosing your bumper.\u003c\/p\u003e\n\n\u003ch2\u003eTube Construction and Rear-End Layout\u003c\/h2\u003e\n\u003cp\u003eSteel tubing forms the main visual structure, with steel plate used in the assembly. The bumper has a micro-texture black powder-coat finish and CNC-etched logo detailing. The tube layout gives your Bronco a different rear profile from the MTO or Spec Series plate bumpers.\u003c\/p\u003e\u003cp\u003eWelded-in zip-tie tabs provide places to secure accessory wiring. Use those tabs to organize the harnesses for the rear lights rather than routing wiring loosely across the openings. Confirm clearance around the hitch and other equipment during final alignment.\u003c\/p\u003e\n\n\u003ch2\u003eWill a 37-Inch Spare Clear?\u003c\/h2\u003e\n\u003cp\u003eDV8 specifies clearance for up to a 37-inch spare mounted on the OEM tire carrier. That describes the space above the bumper; it does not increase the carrier's load rating or establish that every wheel-and-tire combination is suitable for the factory carrier.\u003c\/p\u003e\u003cp\u003eA larger spare can cover the third brake light. DV8 recommends a brake-light extension to retain full visibility with a 37-inch tire. Check the light, tailgate movement, and actual tire position when planning the complete spare-tire setup on your Bronco.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Rear Lights Fit?\u003c\/h2\u003e\n\u003cp\u003eThe bumper provides two mounting positions for 3-inch light pods, one toward each side. These let you add rear-facing lighting for trail use according to the lights and wiring arrangement you choose.\u003c\/p\u003e\u003cp\u003eThe pods are separate purchases. Choose compatible housings and mounting brackets, and plan how they will be switched before installation. Mounting provisions alone do not include the lights, harness, or electrical connections needed to operate them.\u003c\/p\u003e\n\n\u003ch2\u003eParking Sensors and License-Plate Wiring\u003c\/h2\u003e\n\u003cp\u003eBroncos with factory parking sensors require the separately purchased MCFSNSR-01 sensor kit for installation. Plugs are supplied for the sensor holes on vehicles without the feature. Identify your Bronco's sensor equipment before removing the original bumper.\u003c\/p\u003e\u003cp\u003eThe installation guide also covers license-plate relocation and its light wiring. The bumper's main mounts bolt on without cutting the vehicle structure, but that does not make the entire job wiring-free. Follow the guide's plate-light connection and harness-routing steps so the plate remains illuminated after relocation.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about three hours for installation. Arrange a second person to support the factory bumper during removal and help position the replacement. Allow time for sensor transfer, plate-bracket installation, and electrical work.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-08_Installation__Guide_Final.pdf?v=17870981561895878067\"\u003erear tube bumper installation guide\u003c\/a\u003e first. Check its parts inventory and routing instructions before starting, especially if your Bronco uses the factory parking sensors or you are adding auxiliary lights.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the rear tube bumper assembly, mounting hardware, sensor-hole plugs, and the license-plate relocation and lighting components shown in the guide. Auxiliary pods, the MCFSNSR-01 sensor kit, and a third brake-light extension are separate purchases. Check the guide for the detailed hardware list.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Retain your receipt and review the full terms for coverage limits and claim requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43576662196298,"sku":"RBBR-08","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/ob1wjWqw.jpg?v=1778203499"},{"product_id":"dv8-spec-series-rear-bumper-ford-bronco","title":"2021-2027 Ford Bronco Rear Bumper | DV8 Offroad Spec Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Spec Series Bronco rear bumper, RBBR-05, fits the 2021–2026 Ford Bronco, including Bronco Raptor models from 2022. DV8 explicitly lists compatibility with all trim levels. It works with the factory hitch and parking sensors and clears up to a 37-inch spare on the OEM carrier.\u003c\/p\u003e\u003cp\u003eDV8's current listing ends at 2026. Confirm compatibility before ordering for a 2027 Bronco or Bronco Raptor. Check any aftermarket tire-carrier or hitch changes separately from the stated factory-equipment fitment.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose the Spec Series if your Bronco needs a steel rear bumper with dedicated recovery attachments and added lighting positions. Its plate construction and satin black accents also make it a natural visual partner for the Spec Series front bumpers.\u003c\/p\u003e\u003cp\u003eThe rear bumper is not restricted to a matching front series. Its practical appeal is the combination of recovery mounts, pod-light positions, spare clearance, and factory-hitch compatibility. Compare those features with the open design of the rear tube bumper or the raised layout of the FS-15.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Protection with Satin Accents\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses 3.5mm and 5mm steel plate with a micro-texture black powder-coat finish. Satin black aluminum accent panels break up the steel face and match the design language used across the Spec Series.\u003c\/p\u003e\u003cp\u003eWelded-in zip-tie tabs provide places to secure aftermarket-light wiring. Plan the wiring path around your Bronco's hitch, spare, and bumper mounts before tightening the assembly. Keeping the harness organized helps you inspect and service the connections later.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery Mounts and Rear Lighting\u003c\/h2\u003e\n\u003cp\u003eTwo 1-inch-thick D-ring mounts provide designated recovery attachment positions. DV8 specifies that these mounts accept a 7\/8-inch pin; match your shackle hardware to that dimension rather than choosing by appearance alone. No recovery load rating is implied by the mount thickness.\u003c\/p\u003e\u003cp\u003eThe bumper also accepts two 3-inch light pods for rear-facing illumination. Lights and wiring are separate purchases. Choose the switching arrangement and mounting hardware with your intended use in mind before assembling the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eSpare-Tire and Third Brake-Light Clearance\u003c\/h2\u003e\n\u003cp\u003eDV8 lists room above the bumper for up to a 37-inch spare on the OEM carrier. With that tire size, it calls for a third brake-light extension to maintain full visibility of the light.\u003c\/p\u003e\u003cp\u003eSpare clearance is a measurement of available space, not an upgrade to the tailgate or carrier's weight capacity. Check the weight and position of your wheel-and-tire combination, along with any reinforcement or spacer requirements, before completing your Bronco's spare setup.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Stays?\u003c\/h2\u003e\n\u003cp\u003eThe bumper accommodates the factory hitch, rear parking sensors, trailer plugs, and license-plate lighting. Sensor locations allow the original parking sensors to be transferred rather than deleting the feature.\u003c\/p\u003e\u003cp\u003eThe guide includes license-plate relocation and wiring work. It also identifies trimming needed on certain sensor-bezel tabs to fit the thicker bumper material. That detail matters when planning the job: the main bumper mounts bolt on, but transferring every factory component can require additional work.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8's current listing and installation guide estimate approximately three hours, with two people for removal and installation. Assemble the bumper and organize the sensor harness before lifting it into place.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-05_Install_Guide__Final.pdf?v=2134070394149905159\"\u003eSpec Series rear bumper installation guide\u003c\/a\u003e before starting. Follow the plate-light wiring and harness-routing steps, then check sensor operation and plate illumination after the bumper is aligned and secured.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Spec Series rear bumper assembly, accent panels, D-ring mounts, mounting hardware, and license-plate relocation components described in the guide. Rear light pods, recovery shackles, and a third brake-light extension are separate purchases. Consult the guide for the full hardware inventory.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Keep your receipt and consult the complete terms for limitations, exclusions, and claim instructions.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43576667340874,"sku":"RBBR-05","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/sZVdEaZQ.jpg?v=1778204139"},{"product_id":"dv8-competition-series-rear-bumper-ford-bronco","title":"2021-2027 Ford Bronco Rear Bumper | DV8 Offroad Competition Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Competition Series Bronco rear bumper, RBBR-04, fits 2021–2026 Ford Bronco models, excluding Bronco Raptor. It works with the factory hitch and backup sensors and provides room for up to a 37-inch spare.\u003c\/p\u003e\u003cp\u003eDV8's fitment table specifically excludes Raptor, so the broad Bronco model range should not be read as Raptor compatibility. A 2027 application also needs confirmation because the manufacturer's current listing stops at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis bumper suits owners who want a low-profile, desert-racing-inspired rear end with added light mounts and spare-tire clearance. The tube-and-plate construction gives it a different appearance from a full plate bumper, while paintable aluminum panels let you personalize the accents.\u003c\/p\u003e\u003cp\u003eChoose it for those features rather than assuming it has every recovery provision found on other rear bumpers. The \u003ca href=\"\/products\/dv8-spec-series-rear-bumper-ford-bronco\"\u003eSpec Series\u003c\/a\u003e and \u003ca href=\"\/products\/dv8-mto-series-rear-bumper-ford-bronco\"\u003eMTO Series\u003c\/a\u003e are alternatives to compare when dedicated D-ring mounts are a priority.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Profile Tube and Plate Construction\u003c\/h2\u003e\n\u003cp\u003eThe Competition rear bumper combines steel tube with 3.5mm and 5mm steel plate. DV8 lists an approximate weight of 73 pounds. A micro-texture black powder-coat finish covers the main assembly, with aluminum accents toward each end.\u003c\/p\u003e\u003cp\u003eThe low-profile layout is intended to leave more room around trail obstacles at the rear of your Bronco. The aluminum panels can be painted to suit your build, allowing you to change the accent color while keeping the main black bumper finish.\u003c\/p\u003e\n\n\u003ch2\u003eWill a Larger Spare Clear?\u003c\/h2\u003e\n\u003cp\u003eDV8 specifies clearance for a spare up to 37 inches. Check that statement against your actual wheel offset, tire position, and carrier arrangement, particularly if your Bronco already has spacers or an aftermarket tire carrier.\u003c\/p\u003e\u003cp\u003eBumper clearance does not establish the load capacity of the factory carrier. A larger spare can also affect third brake-light visibility, so check the complete rear setup rather than treating the tire's nominal diameter as the only measurement that matters.\u003c\/p\u003e\n\n\u003ch2\u003eRear Lighting and Plate Relocation\u003c\/h2\u003e\n\u003cp\u003eThe bumper provides two mounts for 3-inch light pods, one toward each end. The installation guide illustrates flush-mount pods; confirm the mounting style and dimensions of your chosen lights before ordering.\u003c\/p\u003e\u003cp\u003eA tailgate-mounted license-plate bracket is included. Its light wiring and harness routing are part of the installation, not an optional detail to leave until after the bumper is fitted. Plan the plate position, spare tire, and rear lighting together so they do not compete for the same space.\u003c\/p\u003e\n\n\u003ch2\u003eWill My Bronco's Backup Sensors Work?\u003c\/h2\u003e\n\u003cp\u003eThe bumper has mounting holes for the original backup sensors, with plugs provided for Broncos without sensors. The factory hitch remains compatible, so replacing the bumper does not require replacing that hitch assembly.\u003c\/p\u003e\u003cp\u003eThe installation guide notes that some sensor-bezel tabs may need trimming to fit the thicker bumper material. Keep the sensors in their intended positions and orientations during transfer. Check their operation after installation rather than assuming that physical fit alone confirms correct operation.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates approximately four hours for installation, including minor wiring. The main bumper mounts bolt on, but the plate relocation, sensor transfer, and light connections make this more involved than simply exchanging two bare bumper shells.\u003c\/p\u003e\u003cp\u003eReview the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-04_Install_Guide_V3.pdf?v=11749956925827444686\"\u003eCompetition rear bumper installation guide\u003c\/a\u003e first. Arrange help for positioning the assembly and follow the instructions for routing the plate-light wiring through the tailgate and rear interior.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Competition Series rear bumper assembly, aluminum accent panels, tailgate-mounted license-plate bracket, plate-light components, sensor-hole plugs, and mounting hardware. Auxiliary light pods and their required wiring accessories are separate purchases. Use the guide's inventory to check the kit before beginning.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty covering defects in materials and workmanship from the purchase date. Keep your purchase record and review the manufacturer's terms for limitations and the claim process.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584855244874,"sku":"RBBR-04","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/DoOVci_g.jpg?v=1778514762"},{"product_id":"dv8-fs-15-series-rear-bumper-ford-bronco","title":"2021-2027 Ford Bronco Rear Bumper | DV8 Offroad FS-15 Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad FS-15 Bronco rear bumper, RBBR-02, fits the 2021–2026 Ford Bronco and includes Bronco Raptor applications from 2022. It retains the factory hitch and backup sensors while adding a higher-clearance rear profile, recovery mounts, and flush-mount light positions.\u003c\/p\u003e\u003cp\u003eRaptor fitment has conditions: DV8 specifies removing the rear mud flaps and using the LPBR-03 license-plate bracket because the included bracket does not fit Raptor. A 2027 application needs confirmation; the current manufacturer listing ends at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose the FS-15 when your Bronco's rear clearance is a priority. Its raised middle section and tapered wings distinguish it from a bumper chosen mainly for a broad rear face or open tube styling.\u003c\/p\u003e\u003cp\u003eIt also suits owners who want rear recovery attachments and flush-mounted lighting in the same assembly. Those features make the FS-15 a practical option to compare with the \u003ca href=\"\/products\/dv8-mto-series-rear-bumper-ford-bronco\"\u003eMTO rear bumper\u003c\/a\u003e, with the shape and license-plate arrangement helping distinguish the two.\u003c\/p\u003e\n\n\u003ch2\u003eRaised Center and Tapered Wings\u003c\/h2\u003e\n\u003cp\u003eThe bumper's center sits higher than the factory rear bumper, and its ends taper to provide room around trail obstacles. Steel plate and reinforced supports form the structure, finished in micro-texture black powder coat.\u003c\/p\u003e\u003cp\u003eThis geometry is the defining feature of the FS-15. Consider the shape around the corners and middle of your Bronco's rear end when comparing it with other bumpers, particularly if you regularly navigate ledges or uneven trail exits.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery Points and Flush-Mount Lights\u003c\/h2\u003e\n\u003cp\u003eTwo reinforced clevis mounts accept 3\/4-inch D-ring shackles. They provide designated recovery attachment points without relying on an auxiliary-light mount or another part of the bumper for that job.\u003c\/p\u003e\u003cp\u003eTwo positions accept 3-inch flush-mount LED pods. With suitable wiring, the lights can provide rear trail illumination or operate with the reverse lights. The pods, shackles, and wiring accessories are separate purchases. Choose the light's mounting style along with its size so it fits the bumper cutout.\u003c\/p\u003e\n\n\u003ch2\u003eLicense Plate, BLIS, and Raptor Requirements\u003c\/h2\u003e\n\u003cp\u003eThe supplied license-plate arrangement sits above the bumper and includes an LED plate light. Broncos equipped with Blind Spot Information System, or BLIS, require the LPBR-03 plate solution to retain that feature according to DV8.\u003c\/p\u003e\u003cp\u003eRaptor owners also need LPBR-03 because the supplied bracket does not fit that model, along with removal of the rear mud flaps. These are fitment requirements, not cosmetic recommendations. Plan the correct bracket before removing your Bronco's factory bumper.\u003c\/p\u003e\n\n\u003ch2\u003eWill a 37-Inch Spare Clear?\u003c\/h2\u003e\n\u003cp\u003eDV8 lists clearance for up to a 37-inch spare on the OEM carrier. It recommends a third brake-light extension to preserve full light visibility with that tire size.\u003c\/p\u003e\u003cp\u003eThat clearance statement concerns the space over the bumper. It does not raise the carrier or tailgate's weight capacity. Check your actual wheel-and-tire combination, carrier arrangement, plate visibility, and tailgate movement as part of the complete installation.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about 2.5 hours for installation. The bumper uses bolt-on mounts, retains the factory rear sensors, and requires plate-light wiring. The guide also describes trimming certain sensor-bezel tabs for the thicker bumper material.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-02_Install-Manual.pdf?v=10172408675947860283\"\u003eFS-15 rear bumper installation guide\u003c\/a\u003e before starting. Arrange help for lifting, identify your BLIS and Raptor requirements, and check sensor and plate-light operation after the bumper is secured.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the FS-15 bumper assembly, reinforced clevis mounts, mounting hardware, and the standard plate bracket and LED plate light. Light pods, D-ring shackles, third brake-light extension, and the LPBR-03 bracket required for BLIS-equipped or Raptor applications are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Retain your receipt and consult the full terms for coverage limits and claim instructions.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584857243722,"sku":"RBBR-02","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/wqgFkyFQ.jpg?v=1778515146"},{"product_id":"dv8-mto-series-rear-bumper-ford-bronco","title":"2021-2027 Ford Bronco Rear Bumper | DV8 Offroad MTO Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad MTO Series Bronco rear bumper, RBBR-01, fits 2021–2026 Ford Bronco models, including Bronco Raptor applications from 2022. It works with the factory hitch and backup sensors and clears up to a 37-inch spare on the OEM carrier.\u003c\/p\u003e\u003cp\u003eFor Raptor, DV8 specifies removing the rear mud flaps and using the LPBR-03 license-plate bracket instead of the included bracket. Confirm any 2027 application before ordering because the current manufacturer listing ends at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eMTO means Made to Overland. This bumper suits Bronco owners who want a plate-style rear bumper with recovery mounts, flush-mounted rear lighting, and room for a larger spare. Its side-mounted plate arrangement is an important part of that layout.\u003c\/p\u003e\u003cp\u003eCompared with the open rear tube bumper, the MTO uses a broader steel body with removable mesh accents. Compared with choosing on appearance alone, its useful buying features are the spare clearance, hitch compatibility, recovery attachments, and ability to retain the rear parking sensors.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Body with Removable Mesh Accents\u003c\/h2\u003e\n\u003cp\u003eThe MTO uses 4mm steel body panels with 5mm mounts and supports. A two-stage micro-texture black powder-coat finish covers the steel, while aluminum mesh inserts provide contrasting accent areas.\u003c\/p\u003e\u003cp\u003eThe mesh panels bolt on and can be removed for painting. That lets you personalize the accents without refinishing the complete bumper. DV8 lists an approximate bumper weight of 79 pounds, so plan assistance for positioning it and take the added equipment into account when planning your Bronco's load.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery Mounts and Rear Trail Lights\u003c\/h2\u003e\n\u003cp\u003eTwo reinforced clevis mounts accept 3\/4-inch D-ring shackles. These are designated recovery attachment locations built into the bumper layout, separate from its lighting provisions.\u003c\/p\u003e\u003cp\u003eThe bumper accepts two 3-inch flush-mount pods. Depending on the wiring arrangement, they can supplement reverse lighting or operate from a separate switch for trail use. Choose flush-mount lights that suit the cutouts and plan the harness before assembly. Lights, shackles, and wiring accessories are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eSpare Clearance and Side Plate Mount\u003c\/h2\u003e\n\u003cp\u003eThe side-mounted license plate leaves space for the tailgate and larger spare. DV8 specifies clearance for up to a 37-inch tire on the OEM carrier and recommends a third brake-light extension to maintain light visibility with that size.\u003c\/p\u003e\u003cp\u003eSpare clearance does not change the carrier's weight rating. Check your actual tire position and carrier equipment along with the plate bracket. Broncos with BLIS require LPBR-03 to retain that feature, and Raptor applications need that bracket because the supplied one does not fit.\u003c\/p\u003e\n\n\u003ch2\u003eWill My Bronco's Backup Sensors Work?\u003c\/h2\u003e\n\u003cp\u003eThe MTO accepts the factory backup sensors. For Broncos originally equipped with plastic bumpers, DV8 strongly recommends OE sensor bezels or its MPRSNSR-01 kit. Sensor-hole plugs are supplied for vehicles without parking sensors.\u003c\/p\u003e\u003cp\u003eThe guide describes trimming certain bezel tabs to fit the thicker bumper material. Identify your original sensor and bezel arrangement before starting, keep track of the sensor positions during transfer, and check operation once everything is installed.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8's product listing estimates about 2.5 hours and calls for two people to lift the bumper into place. The job includes assembly, sensor transfer, the license-plate bracket, and plate-light wiring. Allow additional time for rear pod lights and any required bracket changes.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-01_InstallManual.pdf?v=17674791615308048511\"\u003eMTO rear bumper installation guide\u003c\/a\u003e before beginning. Its cover mentions minor welding, while the product listing describes a direct fit; confirm that discrepancy with DV8 before scheduling an installation that must be completely welding-free.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the MTO rear bumper assembly, removable mesh accents, reinforced clevis mounts, sensor-hole plugs, mounting hardware, and the standard license-plate bracket with plate lights. Auxiliary pods, shackles, sensor-bezel accessories, third brake-light extension, and LPBR-03 bracket are separate purchases when required.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 supplies a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Keep your purchase record and review the complete terms for coverage limitations and claim requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584865206346,"sku":"RBBR-01","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/mFynY0Rw.jpg?v=1778515710"},{"product_id":"dv8-offroad-oe-plus-series-front-bumper-v2-ford-bronco","title":"2021-2027 Ford Bronco Front Bumper V2 | DV8 Offroad OE Plus Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad OE Plus V2 Bronco front bumper, FBBR-06, is listed for the 2021–2026 Ford Bronco. It follows the factory body lines and works with the original skid plate, front camera, and parking sensors. Factory fog lights do not fit this replacement bumper.\u003c\/p\u003e\u003cp\u003eDV8's fitment table says “All Models” but does not separately identify Raptor in this listing. Confirm a Bronco Raptor application before ordering. A 2027 application also needs confirmation because the current manufacturer listing ends at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose the OE Plus V2 if you want a steel front bumper that stays close to your Bronco's factory shape and preserves an ACC-friendly layout. It is a useful option when the priorities are lighting mounts, recovery attachments, and keeping the factory skid instead of adding an integrated winch.\u003c\/p\u003e\u003cp\u003eThe important difference from the original OE Plus is the V2's provision for the adaptive cruise control module. You can retain it in the bumper with the appropriate light-bar arrangement rather than automatically buying a relocation bracket.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Retain ACC?\u003c\/h2\u003e\n\u003cp\u003eThe V2 integrates space for your Bronco's adaptive cruise control module. Light-bar selection determines whether the module can remain there.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith ACC in the bumper:\u003c\/strong\u003e Use a 20-inch single-row bar behind the mesh above the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithout ACC:\u003c\/strong\u003e A 20-inch dual-row bar can sit in the bumper opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith ACC and a dual-row bar:\u003c\/strong\u003e Relocate the module using the separately sold ACC relocation bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDecide on the light and ACC configuration together. The bumper's ability to retain ACC does not mean every light-bar arrangement clears the module.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Other Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eEach wing has mounting positions for two 3-inch pods, giving your Bronco four side pod positions in total. These sit apart from the center light-bar opening, so you can select lighting for the front and sides of the vehicle.\u003c\/p\u003e\u003cp\u003eAuxiliary lights are separate purchases. Check the actual mounting dimensions of the chosen lights and allow for brackets and wiring. The factory fog lights are not reused, so plan aftermarket lighting if that function matters to your build.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Construction and Recovery Mounts\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses 3.5mm and 5mm plate steel with a micro-texture black powder-coat finish. Its low-profile shape keeps the assembly close to the Bronco's body lines. Paintable mesh accent panels let you change the insert color without repainting the complete bumper.\u003c\/p\u003e\u003cp\u003eTwo integrated 1-inch-thick D-ring mounts accept 3\/4-inch shackles. Welded-in zip-tie tabs provide attachment points for light wiring. The recovery mounts and wiring tabs serve separate jobs; secure recovery equipment only to the designated attachments.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Stays?\u003c\/h2\u003e\n\u003cp\u003eThe original front skid plate, camera, and parking sensors remain compatible. DV8 lists no front-camera obstruction from this bumper. Plugs are included for Broncos without front parking sensors, so unused openings can be filled.\u003c\/p\u003e\u003cp\u003eThis is a significant buying distinction from bumpers that replace the skid or require camera relocation. Check what is actually installed on your Bronco, especially if an earlier owner has changed the skid, sensors, or front lighting.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about 2.5 hours for the bolt-on installation. Arrange assistance for removing and positioning the bumpers, and allow time for transferring sensors and fitting your lighting configuration.\u003c\/p\u003e\u003cp\u003eThe \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-06_Install_Guide_Final_v2.pdf?v=5133255675176038864\"\u003eOE Plus V2 installation guide\u003c\/a\u003e explains the ACC cover and light-bar mounting differences. Read it before selecting a center light, then check the supplied hardware against the inventory before taking the factory bumper off.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the OE Plus V2 bumper assembly, accent panels, integrated D-ring mounts, sensor-hole plugs, and mounting hardware. Lights, shackles, and any ACC relocation equipment required by your chosen light configuration are separate purchases. Your factory skid plate is reused rather than supplied as a new part.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 supplies a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Retain your receipt and review the full warranty terms for limitations, exclusions, and the claim process.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584895746122,"sku":"FBBR-06","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-06-oe-plus-v2-bumper-side-profile-product-shot.jpg?v=1788231428"},{"product_id":"dv8-spec-series-winch-front-bumper-ford-bronco-raptor","title":"2022-2027 Ford Bronco Raptor Winch Front Bumper | DV8 Offroad Spec Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Spec Series Bronco Raptor winch front bumper, FBFR-01, fits 2022–2026 Ford Bronco Raptor four-door models. It is specific to Raptor and replaces the factory bumper and skid plate. The original fog lights and skid plate do not transfer to this assembly.\u003c\/p\u003e\u003cp\u003eFor a standard Bronco, use the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco\"\u003eFBBR-05 Spec Series bumper\u003c\/a\u003e. DV8's current Raptor listing ends at 2026, so confirm a 2027 application before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose this bumper if your Bronco Raptor build needs an integrated winch mount, dedicated recovery attachments, skid protection, and several light positions. It combines those functions in a plate-and-tube assembly shaped to follow the Raptor's front end.\u003c\/p\u003e\u003cp\u003eCompared with the \u003ca href=\"\/products\/dv8-tube-series-front-bumper-ford-bronco-raptor\"\u003eRaptor Tube Series bumper\u003c\/a\u003e, the Spec Series puts winch mounting at the center of the design. It is the more relevant option to compare when adding a winch is a requirement rather than a possible future accessory.\u003c\/p\u003e\n\n\u003ch2\u003eWinch Mount and D-Ring Attachments\u003c\/h2\u003e\n\u003cp\u003eThe bumper accommodates various winch sizes. Confirm the dimensions and mounting requirements of your specific winch before ordering so you can plan access to its controls and line routing. The bumper does not include a winch simply because it provides the mount.\u003c\/p\u003e\u003cp\u003eTwo 1-inch-thick D-ring mounts accept 3\/4-inch shackles. The tubular bull bar adds light brush and debris protection around the winch and grille, while also serving as an auxiliary-light mount. Use the designated recovery attachments for recovery gear.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Bumper with Replacement Skid\u003c\/h2\u003e\n\u003cp\u003eThe assembly combines steel plate and steel tube with a micro-texture black powder-coat finish. A heavy-duty steel skid replaces your Bronco Raptor's factory skid, giving the bumper a matching lower protective section.\u003c\/p\u003e\u003cp\u003eDV8 lists a standard accent panel and an optional red-R accent treatment. Check the selected package if that appearance matters to your build. Welded-in zip-tie tabs provide places to organize wiring for the lights and winch instead of leaving harnesses loose behind the bumper face.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eThe light-bar mounts have specific compatibility requirements. Use the listed models rather than assuming any bar with the same nominal length will fit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBehind the center mesh:\u003c\/strong\u003e Baja Designs S8 20-inch, Rigid SR 20-inch, or DV8 Elite 20-inch Single Row.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBull bar:\u003c\/strong\u003e Baja Designs S8 10-inch, Rigid SR Series 10-inch, or DV8 Elite 13-inch Single Row.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWings:\u003c\/strong\u003e Up to four 3-inch pods, two per side.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAuxiliary lights and their wiring are separate purchases. Choose the complete light layout before assembling the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eCamera and ACC Relocation Requirements\u003c\/h2\u003e\n\u003cp\u003eThe bumper retains factory parking sensors, but it obstructs the front camera. Plan a compatible camera-relocation solution if you want to restore an unobstructed view from that camera.\u003c\/p\u003e\u003cp\u003eDV8 specifies the ABBR-01 relocation mount for retaining adaptive cruise control. The manufacturer's product information does not establish that this bracket comes in the bumper package, so plan it as a separate accessory and verify your order contents. Parking-sensor compatibility does not mean all front electronics remain in their original positions.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about four hours for installation and requires assistance for bumper removal and positioning. The main bumper installation is bolt-on, with no cutting or drilling specified. Accessories and electronics relocation can add time.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBFR-01_Install_Guide_Final.pdf?v=7985255945467945863\"\u003eRaptor Spec Series installation guide\u003c\/a\u003e before starting. Confirm your hardware inventory and arrange the winch, lights, and required relocation parts so the complete setup can be assembled in a planned sequence.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Raptor Spec Series bumper assembly, bull bar, replacement skid plate, D-ring mounts, and mounting hardware. Check the selected accent-panel configuration when ordering. The winch, shackles, lighting, and electronics relocation accessories should be planned separately.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Keep your receipt and review the complete warranty terms for limitations, exclusions, and claim instructions.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584938442826,"sku":"FBFR-01","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbfr-01-spec-series-bumper-bull-bar-side-profile.jpg?v=1788231382"},{"product_id":"dv8-spec-series-winch-front-bumper-ford-bronco","title":"2021-2027 Ford Bronco Winch Front Bumper | DV8 Offroad Spec Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Spec Series Bronco front bumper adds a recessed winch mount, steel skid plate, and several auxiliary-light mounting positions. Manufacturer part number FBBR-05 fits 2021–2026 Ford Bronco two-door and four-door models, excluding Bronco Raptor. It replaces the factory front bumper on the full-size Bronco; it does not fit Bronco Sport.\u003c\/p\u003e\n\u003cp\u003eFor Raptor models, see the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco-raptor\"\u003eRaptor Spec Series front bumper\u003c\/a\u003e. Fitment for a 2027 Bronco needs confirmation before ordering because DV8's current listing stops at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis Bronco winch bumper suits owners planning a trail build who also want skid protection and room for added lighting. Its low-profile shape is designed around front-end clearance for rock crawling. The recessed winch position keeps part of the winch within the bumper, while the tubular bull bar adds light brush protection around the winch and grille.\u003c\/p\u003e\n\u003cp\u003eFor your Bronco, the main benefit is the combination of features: winch mounting, a replacement skid plate, and light mounts in the center, wings, and bull bar. Consider which of those you will use when comparing it with a simpler bumper.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does the Winch Mount Work?\u003c\/h2\u003e\n\u003cp\u003eThe recessed mount accommodates multiple winch sizes. Check your winch's dimensions and mounting requirements before ordering so the housing, controls, and line routing work with the bumper. A winch-ready bumper still needs a compatible winch and fairlead purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoller fairleads do not fit this bumper.\u003c\/strong\u003e For a steel-cable winch, DV8 recommends an iron or steel hawse fairlead. Select the fairlead for both the bumper opening and your winch line rather than transferring an existing roller setup.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Construction and Skid Protection\u003c\/h2\u003e\n\u003cp\u003eThe bumper combines steel plate and tubular steel with a micro-texture black powder-coat finish. A satin black mesh accent plate sits at the center. The textured bumper and contrasting mesh give the assembly a consistent finish around its lighting openings.\u003c\/p\u003e\n\u003cp\u003eThe included heavy-duty steel skid plate replaces your Bronco's stock skid and adds protection beneath the bumper. Welded-in zip-tie tabs give you places to secure accessory wiring. Plan your wire routing before installation so the harnesses stay clear of sharp edges and moving components.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eThere are three mounting areas, each with its own light requirements. Choose lights for the specific location rather than using bar length alone to judge fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBull bar:\u003c\/strong\u003e Baja Designs S8 10-inch, Rigid SR 10-inch, or DV8 Elite 13-inch Single Row. The Elite 13-inch requires slide bracket BESLDBKTLG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bumper mount:\u003c\/strong\u003e Baja Designs S8 20-inch, Rigid SR 20-inch, or DV8 Elite 20-inch Single Row.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBumper wings:\u003c\/strong\u003e Two 3-inch light pods on each side, for four total.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe separate positions let you build your Bronco's trail-lighting layout around your driving needs. Auxiliary lights are sold separately, so include the lights and any required brackets in your installation plan.\u003c\/p\u003e\n\n\u003ch2\u003eWill My Bronco's Factory Sensors Still Work?\u003c\/h2\u003e\n\u003cp\u003eThis front bumper retains your Bronco's factory parking sensors, and sensor-hole plugs are included for Broncos without them. Camera and adaptive cruise control equipment need separate attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptive cruise control requires the separately sold ABBR-01 relocation mount.\u003c\/strong\u003e The bumper also obstructs the factory front camera. If your Bronco has a front camera, plan a compatible relocation solution to retain an unobstructed view. Check these requirements before fitting a winch or lights so the complete setup works together.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThis Ford Bronco front bumper uses a bolt-on mounting arrangement. DV8 estimates roughly four hours for installation and calls for assistance when removing and installing the bumpers. Additional accessories and electronics relocation can add time to the job.\u003c\/p\u003e\n\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-05_Install_Guide.pdf?v=15941897564715404463\"\u003eFBBR-05 installation guide\u003c\/a\u003e before starting. Check the hardware inventory, gather the listed tools, and decide when to install your winch and lighting. Have another person ready to help position the assembly while you align and start the mounting hardware.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Spec Series front bumper, tubular bull bar, replacement steel skid plate, mounting hardware, and sensor-hole plugs. Refer to the installation guide for the detailed hardware inventory.\u003c\/p\u003e\n\u003cp\u003eThe winch, fairlead, auxiliary lights, and ACC relocation mount are separate purchases. Check the accessories in installed photos against this list when planning your build and budget.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 Offroad provides a one-year limited manufacturer warranty from the purchase date for defects in materials and workmanship. Coverage is subject to the manufacturer's warranty terms. Keep your purchase record and review those terms for the claim process, limitations, and exclusions.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43642489831498,"sku":"FBBR-05","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-05-spec-series-bumper-bull-bar-product-shot.jpg?v=1788231317"},{"product_id":"dv8-competition-series-front-bumper-ford-bronco","title":"2021-2027 Ford Bronco Front Bumper | DV8 Offroad Competition Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Competition Series Bronco front bumper, FBBR-04, fits 2021–2026 Ford Bronco models, excluding Raptor. It replaces the factory bumper and skid with a low-profile tube-and-plate assembly and a supplied steel skid. Factory fog lights do not transfer.\u003c\/p\u003e\u003cp\u003eDV8 currently lists this bumper through 2026; a 2027 Bronco application needs confirmation. Owners starting with the factory plastic bumper also need to account for cutting the original skid-plate\/D-ring mounts during installation.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose the Competition Series if front-end clearance is a higher priority than an integrated winch mount. DV8 describes it as its lowest-profile Bronco bumper, with a desert-racing-inspired shape intended to help the front end clear obstacles.\u003c\/p\u003e\u003cp\u003eThis is a different approach from the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco\"\u003eSpec Series winch bumper\u003c\/a\u003e. The Competition focuses on a compact bumper-and-skid layout; the Spec provides a built-in winch mount. Choose according to how you plan to use your Bronco rather than appearance alone.\u003c\/p\u003e\n\n\u003ch2\u003eLow Profile with Extended Skid Protection\u003c\/h2\u003e\n\u003cp\u003eThe supplied steel skid replaces the factory plastic or metal skid. Bolt-on side gussets add coverage around the engine area, and the bumper-and-skid combination is shaped to improve approach clearance over the stock arrangement.\u003c\/p\u003e\u003cp\u003eSteel tube and plate construction creates the main structure, while a paintable aluminum mesh panel sits at the center. DV8 lists an approximate weight of 59 pounds. The mesh provides an opening for airflow to the intercooler while giving you an accent panel you can finish to match your build.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eInset mounting positions accept two 3-inch LED pods and a 20-inch dual-row LED light bar. This gives your Bronco a central lighting option plus a pod position toward either side.\u003c\/p\u003e\u003cp\u003eThe mounts are included provisions, not supplied lamps. Check your chosen light's bracket dimensions and plan its wiring before fitting the bumper. A light labeled 20 inches still needs compatible mounting geometry and adequate clearance behind the opening.\u003c\/p\u003e\n\n\u003ch2\u003eWill My Bronco's Sensors Still Work?\u003c\/h2\u003e\n\u003cp\u003eThe bumper provides mounting locations for the factory front parking sensors. Plugs are supplied for Broncos without the feature, so those openings can be filled. Adaptive cruise control requires the separately sold ABBR-01 relocation bracket to retain operation.\u003c\/p\u003e\u003cp\u003eCheck your Bronco's equipment before ordering accessories. Parking-sensor retention and ACC relocation are separate subjects, and the factory fog lamps do not fit the new bumper. Plan replacement trail lighting independently of the original fog-light installation.\u003c\/p\u003e\n\n\u003ch2\u003eDoes Installation Require Cutting?\u003c\/h2\u003e\n\u003cp\u003eOn Broncos originally equipped with the plastic front bumper, DV8 specifies trimming the skid-plate mount\/D-ring portions flush to accept the new skid. The installation guide lists a cutoff tool for that application. This should not be presented as a modification-free install for every Bronco.\u003c\/p\u003e\u003cp\u003eUse the instructions for your original bumper configuration. Review the cutting requirement before dismantling the vehicle, particularly if you want to understand what would be involved in returning to the factory setup later.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates roughly three hours for installation, with assistance useful for positioning the assembly. The process includes bumper assembly, sensor transfer, skid installation, and wiring for any lights you add. ACC relocation can add work.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-04_Instal_Guide_V2_-_FINAL.pdf?v=1362891740855986901\"\u003eCompetition front bumper installation guide\u003c\/a\u003e before starting. Follow its hardware and alignment sequence so the replacement skid and side gussets are positioned as intended.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Competition Series front bumper assembly, replacement steel skid plate, bolt-on side gussets, center accent panel, sensor-hole plugs, and installation hardware. Lights, wiring accessories, and the required ACC relocation bracket for equipped Broncos are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Coverage follows the manufacturer's terms; retain your receipt and review the limitations and claim requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584964526154,"sku":"FBBR-04","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-04-competition-bumper-side-profile-product-shot.jpg?v=1788231278"},{"product_id":"dv8-oe-plus-series-front-bumper-ford-bronco","title":"2021-2027 Ford Bronco Front Bumper | DV8 Offroad OE Plus Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad OE Plus Bronco front bumper, FBBR-03, fits 2021–2026 Ford Bronco two-door and four-door models, excluding Raptor. It works with the factory plastic or metal skid plate and retains the front parking sensors. Factory fog lights do not transfer.\u003c\/p\u003e\u003cp\u003eDV8's current listing stops at 2026, so confirm compatibility for a 2027 Bronco before ordering. This is the original OE Plus bumper, distinct from the FBBR-06 V2 with its different adaptive cruise control arrangement.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis bumper suits Bronco owners who want a steel replacement that stays close to the factory body lines. It adds dedicated recovery attachments and lighting mounts while allowing you to reuse the original skid plate.\u003c\/p\u003e\u003cp\u003eIt is not winch-compatible. That helps explain its slim layout and makes it a different choice from the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco\"\u003eSpec Series winch bumper\u003c\/a\u003e. If a winch is central to your build, select a bumper designed to mount one rather than treating this as a winch platform.\u003c\/p\u003e\n\n\u003ch2\u003eFactory Styling with Three-Piece Construction\u003c\/h2\u003e\n\u003cp\u003eThe original OE Plus uses a three-piece assembly with steel body panels, steel mounts and supports, and a micro-texture black powder-coat finish. The center cutaway pattern follows the grille styling used on Badlands, Wildtrak, and First Edition Broncos.\u003c\/p\u003e\u003cp\u003eThe shape keeps the bumper close to your Bronco's front end rather than projecting a large winch cradle ahead of it. This makes the OE Plus worth considering when the factory-style appearance is as important to you as the added lighting and recovery provisions.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eA center mounting position accepts a 20-inch dual-row light bar behind the grille-pattern cutaways. The cutaways allow light through while placing the bar behind the bumper face. Two 3-inch pod positions sit on each side, for four pods total.\u003c\/p\u003e\u003cp\u003eLights are sold separately. Match their brackets and mounting dimensions to the bumper before choosing a harness. Because the factory fog lights do not fit, decide which aftermarket lights you want as part of the bumper installation rather than assuming the original lamps will carry over.\u003c\/p\u003e\n\n\u003ch2\u003eCamera, Sensors, and ACC Compatibility\u003c\/h2\u003e\n\u003cp\u003eYour Bronco's factory parking sensors transfer to the new bumper. Sensor-hole plugs are provided for vehicles without those sensors. The bumper is compatible with the factory camera system, although DV8 notes that part of the bumper is visible in the front-camera image.\u003c\/p\u003e\u003cp\u003eAdaptive cruise control requires relocating the module with the appropriate bracket, sold separately. This is an important difference from the OE Plus V2, which can retain ACC in the bumper with a suitable single-row lighting arrangement. Choose between the versions with your Bronco's equipment in mind.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery Mounts and Factory Skid Fit\u003c\/h2\u003e\n\u003cp\u003eReinforced clevis mounts accept 3\/4-inch D-ring shackles, adding designated front recovery attachment points. Shackles and other recovery equipment are separate from the bumper's mounting provisions.\u003c\/p\u003e\u003cp\u003eThe bumper clears both original plastic and metal front skid plates. You can keep that part of your existing setup rather than automatically purchasing another skid. If your Bronco has an aftermarket skid, check that specific combination instead of assuming the factory-skid statement covers it.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about 1.5 hours for the bumper installation and calls for help lifting the assembly into place. Additional light wiring or ACC relocation can increase the time required for your Bronco.\u003c\/p\u003e\u003cp\u003eReview the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-03_Install_Guide_V3.pdf?v=13087485309056994619\"\u003eoriginal OE Plus installation guide\u003c\/a\u003e before starting. Confirm your sensor positions and hardware inventory, and arrange any relocation equipment before removing the original bumper. The guide is specific to FBBR-03, so use it rather than the V2 instructions.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the three-piece OE Plus bumper assembly, reinforced recovery mounts, sensor-hole plugs, and mounting hardware. Auxiliary lights, shackles, wiring accessories, and the ACC relocation bracket are separate purchases. The factory skid plate is reused, not included as a new replacement.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 backs this bumper with a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Keep your receipt and consult the full terms for coverage limits and the claim process.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43585009811530,"sku":"FBBR-03","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-03-oe-plus-bumper-side-profile-product-shot.jpg?v=1788231234"},{"product_id":"dv8-capable-bull-bar-ford-bronco","title":"2021-2027 Ford Bronco Capable Bumper Bull Bar | DV8 Offroad","description":"\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eBuilt for the 2021-2027 Ford Bronco with the bumper type listed below. Bull bars are bumper-specific, so confirm your factory bumper before ordering.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eBronco owners keeping the factory Capable bumper who want center grille protection and a 20-inch light-bar mount without replacing the whole bumper.\u003c\/p\u003e\n\u003ch2\u003eDesign \u0026amp; Lighting\u003c\/h2\u003e\n\u003cp\u003eThis steel bull bar adds a center hoop and a mounting position for a 20-inch light bar while keeping the factory Capable bumper in place.\u003c\/p\u003e\n\u003ch2\u003eCamera \u0026amp; Fitment\u003c\/h2\u003e\n\u003cp\u003eThe bull bar is built for the factory Capable bumper only. It does not fit the Heavy-Duty Modular bumper or plastic bumper. The bar blocks part of the factory front-camera view.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation requires drilling. Plan on roughly 1 to 2 hours with basic hand tools.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43585094189130,"sku":"LBBR-09","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/K6Xz_hEw.jpg?v=1778522946"},{"product_id":"dv8-modular-bumper-bull-bar-ford-bronco","title":"2021-2027 Ford Bronco Modular Bumper Bull Bar | DV8 Offroad","description":"\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eBuilt for the 2021-2027 Ford Bronco with the bumper type listed below. Bull bars are bumper-specific, so confirm your factory bumper before ordering.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eBronco owners keeping the factory Heavy-Duty Modular bumper who want a simple center bull bar and 20-inch light-bar mount without a full bumper swap.\u003c\/p\u003e\n\u003ch2\u003eDesign \u0026amp; Lighting\u003c\/h2\u003e\n\u003cp\u003eThe steel bull bar adds a compact center hoop and a mounting position for a 20-inch light bar. It keeps the factory Heavy-Duty Modular bumper as the base of the setup.\u003c\/p\u003e\n\u003ch2\u003eBumper Compatibility\u003c\/h2\u003e\n\u003cp\u003eThis bull bar fits the factory Heavy-Duty Modular bumper only. It does not fit the Capable bumper, plastic bumper, or Bronco Raptor.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation uses existing hardware and does not require drilling. DV8 lists about 1 hour for installation.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43585107689546,"sku":"LBBR-04","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2WRIYPpw.jpg?v=1778523615"},{"product_id":"dv8-factory-steel-bumper-bull-bar-ford-bronco","title":"2021-2027 Ford Bronco Factory Steel Bumper Bull Bar | DV8 Offroad","description":"\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eBuilt for the 2021-2027 Ford Bronco with the bumper type listed below. Bull bars are bumper-specific, so confirm your factory bumper before ordering.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eBronco owners with the factory Heavy-Duty Modular steel bumper who want quick bolt-on center protection without drilling or replacing the bumper.\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThis steel bull bar adds protection in front of the grille while keeping the factory bumper in place. The micro-texture black finish matches the rest of DV8's Bronco hardware.\u003c\/p\u003e\n\u003ch2\u003eBumper Compatibility\u003c\/h2\u003e\n\u003cp\u003eIt fits the factory Heavy-Duty Modular steel bumper only. It does not fit the plastic bumper or Capable bumper.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe bar uses eight existing factory bumper bolts, so there is no drilling or fabrication. Installation is listed at about 30 minutes.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43585407516746,"sku":"LBBR-06","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/8sMuAJKQ.jpg?v=1778525754"},{"product_id":"dv8-tube-fender-flares-ford-bronco-4-door","title":"2021-2026 Ford Bronco Tube Fender Flares 4-Door | DV8 Offroad","description":"\u003ch3\u003eSteel Tube Fender Flares for the 4-Door Ford Bronco Running Bigger Tires\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Tube Fender Flares are built for 2021-2026 Ford Bronco 4-door owners running larger tires who need more coverage than the factory flares provide. Steel tube construction gives these flares the rigidity to handle trail contact without cracking or deforming. Compatible with all 4-door Bronco trim levels including Sasquatch-equipped models. Not compatible with the Raptor or Everglades due to their unique fender configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAggressive Profile Without Looking Overbuilt\u003c\/strong\u003e\u003cbr\u003eThe tube profile is aggressive without being oversized, so the Bronco keeps a purposeful look. Direct bolt-on replacement for the factory flares. Finished in micro-texture black powder coat. Rated at 2 hours to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 4-door, all trims except Raptor and Everglades. Compatible with Sasquatch and non-Sasquatch. Does NOT fit 2-door Bronco or Ford Bronco Sport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFull set of tube fender flares\u003c\/li\u003e\n\u003cli\u003eHardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel tube\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eInstall time: 2 hours, bolt-on\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43585622704202,"sku":"FDBR-01","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fdbr-01-tube-fender-flare-single-product-shot.jpg?v=1788222760"},{"product_id":"dv8-fender-flare-deletes-ford-bronco","title":"2021-2026 Ford Bronco Fender Flare Deletes | DV8 Offroad","description":"\u003ch3\u003eClean Up the Bronco Body Line With a Flush Fender Flare Delete\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Fender Flare Deletes are built for 2021-2026 Ford Bronco owners who want to remove the factory fender flares and replace them with a clean, flat body line. The delete panels fill the factory flare mounting area with a flush panel so the body line looks intentional rather than incomplete. Works across all trims, 2-door and 4-door.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck Local Regulations First\u003c\/strong\u003e\u003cbr\u003eFender flare deletes expose the tire beyond the body line. Check your local regulations for tire coverage requirements before installing. Sold as a set of 4 covering all front and rear fender positions. Includes all mounting hardware. Finished in micro-texture black powder coat. Rated at 1.5 hours to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco, all trims, 2-door and 4-door. Does NOT fit Ford Bronco Sport, Raptor, or Everglades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFender flare delete panels, set of 4\u003c\/li\u003e\n\u003cli\u003eHardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eSet: 4 panels covering all front and rear positions\u003c\/li\u003e\n\u003cli\u003eInstall time: 1.5 hours, bolt-on\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43585625260106,"sku":"FDBR-03","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fdbr-03-fender-flare-delete-kit-four-panels-product-shot.jpg?v=1788222712"},{"product_id":"dv8-xtract-winch-fairlead-synthetic-rope","title":"Synthetic Rope Winch Fairlead | DV8 Offroad Xtract","description":"\u003ch3\u003eA Synthetic Rope Fairlead That Guides Instead of Cuts\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Xtract Winch Fairlead is built for Bronco owners running synthetic rope who need a fairlead that protects the rope during angle pulls instead of cutting into it. The Xtract design reduces friction and guides the rope cleanly across the bumper opening on left and right angle pulls without the sharp edges that degrade synthetic rope over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Synthetic Rope Only\u003c\/strong\u003e\u003cbr\u003eDesigned for synthetic rope only. Do not use with steel cable. Fits DV8 winch bumpers and most standard hawse-style bumper openings. Base plate measures 11.75L x 3.25H x 1.25D inches. Confirm your bumper's fairlead opening matches before ordering. Rated 18,000 lb working load limit. Hard anodized aluminum construction. Install is 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits DV8 winch bumpers and most aftermarket bumpers with a standard hawse fairlead opening. For synthetic rope only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDV8 Xtract Winch Fairlead\u003c\/li\u003e\n\u003cli\u003eHardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Hard anodized aluminum\u003c\/li\u003e\n\u003cli\u003eWorking load limit: 18,000 lb\u003c\/li\u003e\n\u003cli\u003eBase plate: 11.75L x 3.25H x 1.25D inches\u003c\/li\u003e\n\u003cli\u003eCompatibility: Synthetic rope only\u003c\/li\u003e\n\u003cli\u003eInstall time: 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43612584378442,"sku":"WBPF-02","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/wbpf-02-xtract-fairlead-product-shot.jpg?v=1788222667"},{"product_id":"dv8-winch-fairlead-cover-plate-hawse-bumper","title":"2021-2026 Ford Bronco Winch Fairlead Cover Plate | DV8 Offroad","description":"\u003ch3\u003eClose the Hawse Opening on Your Bronco Winch Bumper When No Winch Is Installed\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Winch Fairlead Cover Plate cleans up the fairlead opening on any winch-ready bumper when no winch is installed. Without a cover plate, the open hawse hole exposes the winch tray and the inside of the bumper to dirt, rocks, and debris on trail. This plate fills the opening with a clean, fitted panel that matches the bumper face.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMeasure Your Opening Before Ordering\u003c\/strong\u003e\u003cbr\u003eVerified fitment on DV8 bumpers with standard hawse-style fairlead openings. Plate measures 11.5 x 2.3 inches. Measure your opening before ordering to confirm it matches. Does NOT fit DV8 Bronco rear bumpers. No drilling required. Finished in micro-texture black powder coat. Install is 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDV8 Winch Fairlead Cover Plate\u003c\/li\u003e\n\u003cli\u003eHardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003ePlate dimensions: 11.5 x 2.3 inches\u003c\/li\u003e\n\u003cli\u003eInstall time: 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43612850192458,"sku":"FBBO-01","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbo-01-fairlead-cover-plate-product-shot.jpg?v=1788222639"},{"product_id":"dv8-pocket-fairlead-synthetic-rope-winch","title":"2021-2026 Ford Bronco Pocket Fairlead for Synthetic Rope | DV8 Offroad","description":"\u003ch3\u003eA Recessed Pocket Fairlead That Keeps the Bronco Bumper Face Clean\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Pocket Fairlead is built for Bronco owners running synthetic rope who want a low-profile fairlead that tucks inside the bumper opening instead of sitting proud of the bumper face. The pocket design guides rope at angle without the friction and cutting risk of a flat hawse, and the recessed fit keeps the front of the bumper looking clean when the winch is not in use. The pocket stores the hook inside when not in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Synthetic Rope Only\u003c\/strong\u003e\u003cbr\u003eFor synthetic rope only. Base plate measures 11.75L x 3.5H x 1.25D inches. Confirm your bumper's pocket opening matches before ordering. Rated 20,000 lb working load limit. Hard anodized aluminum construction. Install is 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDV8 Pocket Fairlead\u003c\/li\u003e\n\u003cli\u003eHardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Hard anodized aluminum\u003c\/li\u003e\n\u003cli\u003eWorking load limit: 20,000 lb\u003c\/li\u003e\n\u003cli\u003eBase plate: 11.75L x 3.5H x 1.25D inches\u003c\/li\u003e\n\u003cli\u003eCompatibility: Synthetic rope only\u003c\/li\u003e\n\u003cli\u003eInstall time: 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43613102145610,"sku":"WBPF-01","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fairlead_on_white_background.jpg?v=1788220160"},{"product_id":"dv8-fairlead-mounted-flip-up-license-plate-bracket","title":"2021-2026 Ford Bronco Fairlead Flip-Up License Plate Bracket | DV8 Offroad","description":"\u003ch3\u003eFront License Plate on a Winch Bumper That Flips Out of the Way for Recovery\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Fairlead Mounted Flip-Up License Plate Bracket solves the front license plate problem for Bronco owners running a winch bumper with a hawse fairlead. Most winch bumpers delete the factory front license plate mount entirely, leaving you non-compliant in states that require front plates. This bracket mounts directly to the fairlead, positions the plate in a legal location, and flips up out of the way when you need full winch access on trail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Drilling, Mounts to the Fairlead Bolts\u003c\/strong\u003e\u003cbr\u003eUses existing fairlead bolts for mounting. No drilling required. Compatible with flat fairlead mounts and most recessed fairlead mounts on DV8 bumpers. Does NOT fit roller style fairleads. Does NOT fit the FBTT2-05 Tundra Center Mount fairlead. Finished in micro-texture black powder coat. Install is 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits most hawse-style fairleads. Designed for DV8 fairleads and DV8 winch bumpers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDV8 Flip-Up License Plate Bracket\u003c\/li\u003e\n\u003cli\u003eHardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eMount: Attaches to fairlead bolts, no drilling\u003c\/li\u003e\n\u003cli\u003eInstall time: 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43613162668106,"sku":"LPBM-02","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/K4WPKgPQ.jpg?v=1779308989"},{"product_id":"dv8-license-plate-relocation-bracket-ford-bronco","title":"2021-2026 Ford Bronco License Plate Relocation Bracket | DV8 Offroad","description":"\u003ch3\u003eMove the Bronco Front License Plate Off the Grille and Down to the Bumper\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Factory Front Bumper License Plate Relocation Bracket gives 2021-2026 Ford Bronco owners a cleaner front license plate position than the factory dealer option. The stock dealer solution mounts the plate above the bumper in front of the grille, blocking airflow. This bracket moves it to the bottom of the bumper at a slight angle, keeping it below the adaptive cruise sensor, out of the grille area, and clear of approach angle during off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits Factory Heavy-Duty Modular Bumper Only\u003c\/strong\u003e\u003cbr\u003eThis bracket is only compatible with the factory Heavy-Duty Modular steel bumper, including the Bronco Raptor. It does NOT fit the factory plastic bumper, and it does NOT fit the Capable steel bumper, even though both are steel. If you're not sure which bumper is on your Bronco, the Modular bumper has visible removable end caps and multiple exposed mounting bolts across the face. The Capable bumper is a single smooth stamped piece with no removable sections. Constructed from 3mm steel, finished in micro-texture black powder coat. Installs using factory mounting points with no drilling. Raptor installs use the included M8x40mm bolts and 22mm spacers in place of the factory bolts used on non-Raptor trucks. Rated at 30 minutes to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco, 2-door and 4-door, with factory Heavy-Duty Modular front bumper, including the Bronco Raptor. Does NOT fit factory plastic bumper, Capable steel bumper, or Ford Bronco Sport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDV8 license plate relocation bracket\u003c\/li\u003e\n\u003cli\u003eMounting hardware, including Raptor-specific M8 spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 3mm steel\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eMount: Factory bumper mounting points, no drilling\u003c\/li\u003e\n\u003cli\u003eInstall time: 30 minutes\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43638635135050,"sku":"LPBR-01","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/eZUnEu0A.jpg?v=1779827604"},{"product_id":"dv8-front-camera-relocation-bracket-ford-bronco","title":"2021-2026 Ford Bronco Front Camera Relocation Bracket | DV8 Offroad","description":"\u003ch3\u003eRestore the Bronco Front Camera View After a Winch Bumper Install\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Front Camera Relocation Bracket is built for 2021-2026 Ford Bronco owners who have installed a winch-style front bumper and need to restore full visibility to the factory front camera. Winch bumpers position the winch directly in the factory camera's field of view. This bracket moves the camera to a new position that clears the obstruction and restores an unobscured view from both the front camera and the 360-degree camera system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot the Same as the ACC Bracket\u003c\/strong\u003e\u003cbr\u003eThe ACC Relocation Bracket (ABBR-01) retains adaptive cruise control. This bracket retains the factory front camera view. They are two separate brackets for two separate systems, and both can be required on the same Bronco at the same time. Adjustable bracket fits all DV8 Bronco winch bumpers and all ADD Bronco winch bumpers. Includes extended camera optical cable and spray hose. Rated at 2.5 hours to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco, 2-door and 4-door. Requires OE factory front camera. Compatible with all DV8 and ADD Bronco winch front bumpers. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDV8 front camera relocation bracket\u003c\/li\u003e\n\u003cli\u003eExtended camera optical cable\u003c\/li\u003e\n\u003cli\u003eSpray hose\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eAdjustable: Yes\u003c\/li\u003e\n\u003cli\u003eInstall time: 2.5 hours\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43642456145994,"sku":"ABBR-03","price":153.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/COejRpdQ.jpg?v=1779997131"},{"product_id":"dv8-universal-quick-release-d-ring-license-plate-mount","title":"2021-2026 Ford Bronco Universal D-Ring License Plate Mount | DV8 Offroad","description":"\u003ch3\u003eBronco Front License Plate Mount That Installs on Any D-Ring and Removes Tool-Free\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Universal Quick Release D-Ring License Plate Mount is built for Bronco owners running an aftermarket bumper with D-ring mounts who need a front license plate solution that does not interfere with trail use. Installs directly to the bumper D-ring position and removes in seconds with a hidden stainless steel ball bearing pin when you need full clearance on trail. No drilling, no permanent modifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eD-Ring Position Varies Per Bumper\u003c\/strong\u003e\u003cbr\u003eThe D-ring mount location varies per bumper, so the plate position will differ depending on your specific bumper and D-ring location. Designed for 1-inch thick D-ring mounts with a 1-inch diameter hole. Steel construction at 3.5 to 5mm thickness, finished in micro-texture black powder coat. Install is 15 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eCompatible with aftermarket bumpers with 1-inch thick D-ring mounts and 1-inch diameter holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDV8 Universal Quick Release D-Ring License Plate Mount\u003c\/li\u003e\n\u003cli\u003eHidden stainless steel ball bearing pin\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel, 3.5 to 5mm\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eCompatible D-ring: 1-inch thick, 1-inch diameter\u003c\/li\u003e\n\u003cli\u003eQuick release: Hidden stainless ball bearing pin, tool-free\u003c\/li\u003e\n\u003cli\u003eInstall time: 15 minutes\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43642545930314,"sku":"LPUN-01","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/WnXPTYlw.jpg?v=1780003783"},{"product_id":"dv8-motorcraft-ford-parking-sensor-bezels","title":"2021-2026 Ford Bronco Parking Sensor Bezels Set of 4 | DV8 Offroad","description":"\u003ch3\u003eReplacement Parking Sensor Bezels for DV8 Ford Bumpers\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Motorcraft parking sensor bezels are replacement ABS plastic bezels built for Ford Bronco owners who have scratched or cracked their factory sensor bezels during a bumper swap. Sold as a set of four for all four sensor positions. Fit 1.1-inch sensor holes on all DV8 Ford bumpers and many other aftermarket bumpers with standard sensor openings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Tools Required, 30-Minute Install\u003c\/strong\u003e\u003cbr\u003eABS plastic construction with a matte finish. Install is rated at 30 minutes with no tools required. Does NOT fit DV8 Bronco rear bumpers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDV8 Motorcraft parking sensor bezels, set of 4\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: ABS plastic\u003c\/li\u003e\n\u003cli\u003eFinish: Matte\u003c\/li\u003e\n\u003cli\u003eSensor hole size: 1.1 inches\u003c\/li\u003e\n\u003cli\u003eSold as: Set of 4\u003c\/li\u003e\n\u003cli\u003eInstall time: 30 minutes\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43659825840202,"sku":"MCFSNSR-01","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/Motorcraft-Parking-Sensor-Bezels-1_543x363_8dbeb9cf-2672-4324-9bf6-da4c801ea013.webp?v=1780497435"},{"product_id":"dv8-capable-bumper-license-plate-mount-ford-bronco","title":"2021-2026 Ford Bronco Capable Bumper License Plate Mount | DV8 Offroad","description":"\u003ch3\u003eBolt-On Front License Plate Mount for the Ford Bronco Capable Steel Bumper\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Capable Bumper License Plate Mount is built for 2021-2026 Ford Bronco owners running the factory Capable Steel Bumper who need a front license plate solution that keeps airflow clear and the grille fully visible. The Capable Steel Bumper is standard on the Badlands and Sasquatch Package. The factory dealer plate mount blocks the grille. This bracket relocates the plate to the center of the bumper without blocking the fog lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Drilling, Uses Factory Hardware\u003c\/strong\u003e\u003cbr\u003eSteel construction finished in micro-texture black powder coat. Installs using factory hardware with no drilling required. Remove from the bumper before running moderate or more difficult trails. Rated at 30 minutes to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco with factory Capable Steel Bumper only. Does NOT fit HD Modular Steel Bumper or plastic bumper. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003cbr\u003eConfirm your Bronco has the factory Capable Steel Bumper before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDV8 Capable Bumper License Plate Mount\u003c\/li\u003e\n\u003cli\u003eFactory hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eMount: Center of bumper, does not block fog lights\u003c\/li\u003e\n\u003cli\u003eInstall time: 30 minutes, bolt-on\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43659832197194,"sku":"LPBR-04","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/lV6MVGYw.jpg?v=1780497708"},{"product_id":"dv8-capable-bumper-slanted-license-plate-mount-ford-bronco","title":"2021-2026 Ford Bronco Capable Bumper Slanted License Plate Mount | DV8 Offroad","description":"\u003ch3\u003eSteeply Angled Front License Plate Mount for the Ford Bronco Capable Steel Bumper\u003c\/h3\u003e\n\u003cp\u003eThe DV8 Offroad Capable Bumper Slanted License Plate Mount is built for 2021-2026 Ford Bronco owners running the factory Capable Steel Bumper who want a front license plate solution with maximum approach clearance. The steep angle keeps the plate out of the way on technical terrain while centering it on the bumper and away from the grille. Great for Badlands and Sasquatch-equipped Broncos that see real trail use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Drilling, Uses Factory Hardware\u003c\/strong\u003e\u003cbr\u003eSteel construction finished in micro-texture black powder coat. Installs using factory hardware with no drilling required. Remove before running hardcore trails. Rated at 30 minutes to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco, 2-door and 4-door, with factory Capable Steel Bumper only. Does NOT fit HD Modular Steel Bumper or plastic bumper. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003cbr\u003eConfirm your Bronco has the factory Capable Steel Bumper before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDV8 Capable Bumper Slanted License Plate Mount\u003c\/li\u003e\n\u003cli\u003eFactory hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eMount: Center of bumper, steep angle for approach clearance\u003c\/li\u003e\n\u003cli\u003eInstall time: 30 minutes, bolt-on\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43659832492106,"sku":"LPBR-05","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/sdfNLK0w.jpg?v=1780498117"},{"product_id":"ford-bronco-4-door-step-slider-turn-offroad","title":"2021-2027 Ford Bronco 4-Door Step-Slider | Turn Offroad","description":"\u003ch2\u003eFord Bronco Step-Slider Fitment\u003c\/h2\u003e\u003cp\u003eThe Turn Offroad 4-door Step-Slider combines a Ford Bronco side step with a stronger rock-slider style structure. It fits 2021-2027 4-door Broncos, including Bronco Raptor.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\u003cp\u003e4-door Bronco and Bronco Raptor owners who want one part to work as both a usable side step and trail-focused rocker protection.\u003c\/p\u003e\n\u003ch2\u003eStep-Slider Construction\u003c\/h2\u003e\u003cp\u003eHeavy-duty tubular steel, dimple-die plating, and stronger mounting brackets form the slider base. A removable textured step bolts on top, giving you easier daily entry without giving up the tighter trail-oriented structure underneath.\u003c\/p\u003e\n\u003ch2\u003eRocker Panel Protection\u003c\/h2\u003e\u003cp\u003eThe slider covers the pinch seam and helps keep rocks and ledges away from the rocker panel. Because the step section can be removed, you can run the cleaner slider profile when trail clearance matters more than daily convenience.\u003c\/p\u003e\n\u003ch2\u003eStep-Slider vs. Side Steps \u0026amp; Rock Sliders\u003c\/h2\u003e\u003cp\u003eThis sits between a dedicated side step and a dedicated rock slider. Choose it if you want both jobs from one part. If you only need entry help, a side step is simpler. If maximum trail protection is the only goal, the Zero Series rock slider is the more focused choice.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation is bolt-on and uses heavier brackets than the factory rail setup. No cutting or drilling is required.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default Title","offer_id":43684407279690,"sku":"ST1-M4","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-4-door-step-rock-slider-6185121_e39740c6-d988-48a8-b211-ae0792343a58.webp?v=1781021638"},{"product_id":"ford-bronco-4-door-rock-sliders-turn-offroad","title":"2021-2027 Ford Bronco 4-Door Rock Sliders | Turn Offroad Zero Series","description":"\u003ch2\u003eFord Bronco Rock Slider Fitment\u003c\/h2\u003e\u003cp\u003eTurn Offroad Zero Series Ford Bronco rock sliders are built for 2021-2027 4-door Broncos, including Bronco Raptor. The high-clearance shape stays tight to the body while the boxed ends and center support structure protect the rocker area.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\u003cp\u003e4-door Bronco and Bronco Raptor owners who want high-clearance rock sliders that sit tight to the body and protect the rocker area on harder trails.\u003c\/p\u003e\n\u003ch2\u003eRock Slider Mounting \u0026amp; Construction\u003c\/h2\u003e\u003cp\u003eThe Zero Series uses boxed ends, center support beams, and dimple-die reinforcing plates to strengthen the slider structure. A three-stage nano-textured powder coat over industrial primer helps protect the steel from chips, trail debris, and corrosion.\u003c\/p\u003e\n\u003ch2\u003eRocker Panel Protection\u003c\/h2\u003e\u003cp\u003eThe goal is simple: keep rocks and ledges off the Bronco's rocker panels without hanging a large step below the body. The tight profile helps preserve ground clearance while giving the lower body a dedicated surface to take trail contact.\u003c\/p\u003e\n\u003ch2\u003eRock Sliders vs. Side Steps\u003c\/h2\u003e\u003cp\u003eThese are rock sliders first. If you mainly need a wide step for daily entry, a running board or step-slider may be easier to live with. If trail protection and clearance matter more, the Zero Series is the better match.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation is bolt-on with no cutting or drilling required. The sliders are sized specifically for the 4-door body; they do not fit 2-door Bronco or Bronco Sport.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default Title","offer_id":43684407345226,"sku":"RS1-M4","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-rock-sliders-4-door-7794635.jpg?v=1781022298"},{"product_id":"ford-bronco-2-door-step-slider-turn-offroad","title":"2021-2027 Ford Bronco 2-Door Step-Slider | Turn Offroad","description":"\u003ch2\u003eFord Bronco Step-Slider Fitment\u003c\/h2\u003e\u003cp\u003eThe Turn Offroad 2-door Step-Slider combines a side step and rock-slider style base in one setup for the 2021-2027 Ford Bronco 2-door. It is built around the shorter rocker length of the 2-door body.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\u003cp\u003e2-door Bronco owners who want a usable daily step without giving up the stronger structure and tighter clearance of a trail-focused slider.\u003c\/p\u003e\n\u003ch2\u003eStep-Slider Construction\u003c\/h2\u003e\u003cp\u003eThe slider uses heavy tubular steel with 1\/4-inch and 3\/16-inch mounting brackets and .160-wall tubing. A removable textured step bolts on top so you can keep easy entry for daily driving or remove it for a cleaner trail setup.\u003c\/p\u003e\n\u003ch2\u003eRocker Panel Protection\u003c\/h2\u003e\u003cp\u003eThe structure covers the pinch seam and gives the rocker area a stronger barrier than a basic side step. The step is removable, so it does not have to stay in the way when clearance matters more than convenience.\u003c\/p\u003e\n\u003ch2\u003eStep-Slider vs. Side Steps \u0026amp; Rock Sliders\u003c\/h2\u003e\u003cp\u003eChoose this if you want both a step and added rocker protection. A basic side step is cheaper and easier for street use, while a dedicated Zero Series rock slider is the better choice for a protection-first build.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation is fully bolt-on with no drilling required. This version fits 2-door Broncos only and does not fit 4-door Bronco or Bronco Sport.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default Title","offer_id":43684407377994,"sku":"ST1-M2","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-2-door-step-slider-2249699.jpg?v=1781022962"},{"product_id":"ford-bronco-4-door-side-steps-turn-offroad","title":"2021-2027 Ford Bronco 4-Door Side Steps | Turn Offroad","description":"\u003ch2\u003eFord Bronco Side Step Fitment\u003c\/h2\u003e\u003cp\u003eTurn Offroad 4-door Ford Bronco side steps fit 2021-2027 models, including Bronco Raptor. They run the length of the cab, hide the factory pinch weld, and give both front and rear passengers a secure step.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\u003cp\u003e4-door Bronco and Bronco Raptor owners who want easier entry, full-length side steps, and a high-clearance design that still looks at home on an off-road build.\u003c\/p\u003e\n\u003ch2\u003eSide Step Design \u0026amp; Grip\u003c\/h2\u003e\u003cp\u003eThe boxed steel design uses CNC-cut openings that let mud and debris fall through instead of collecting on the tread. A textured step surface adds grip, while the three-stage nano-textured powder coat protects the steel underneath.\u003c\/p\u003e\n\u003ch2\u003eSide Steps vs. Rock Sliders\u003c\/h2\u003e\u003cp\u003eThese are side steps with light side protection, not dedicated rock sliders. They sit higher than many running boards, so you get easier entry without hanging a low step far below the rocker area.\u003c\/p\u003e\n\u003ch2\u003eDoor \u0026amp; Tire Fitment\u003c\/h2\u003e\u003cp\u003eThe 4-door steps clear tires up to 38 inches. They do not fit 2-door Bronco or Bronco Sport.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation is bolt-on with no cutting or drilling required.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default Title","offer_id":43684407410762,"sku":"SS1-M4","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-side-step-4-door-9953478.jpg?v=1781039072"},{"product_id":"ford-bronco-2-door-rock-sliders-turn-offroad","title":"2021-2027 Ford Bronco 2-Door Rock Sliders | Turn Offroad Zero Series","description":"\u003ch2\u003eFord Bronco Rock Slider Fitment\u003c\/h2\u003e\u003cp\u003eTurn Offroad Zero Series Ford Bronco rock sliders are sized for the 2021-2027 2-door Bronco. The shorter slider follows the 2-door rocker area closely, using boxed ends and center supports to add protection without hanging far below the body.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\u003cp\u003e2-door Bronco owners who want tight-fitting rock sliders for rocker-panel protection without giving up unnecessary ground clearance.\u003c\/p\u003e\n\u003ch2\u003eRock Slider Mounting \u0026amp; Construction\u003c\/h2\u003e\u003cp\u003eThe slider structure uses boxed ends, center support beams, and dimple-die reinforcing plates. Turn finishes the steel with an industrial primer and three-stage nano-textured powder coat to help it stand up to trail use and weather.\u003c\/p\u003e\n\u003ch2\u003eRocker Panel Protection\u003c\/h2\u003e\u003cp\u003eRock rails matter because the rocker panel sits low between the tires and can take the hit when the Bronco drops off a ledge or slides sideways against a rock. These sliders give that contact a steel surface instead of the body.\u003c\/p\u003e\n\u003ch2\u003eRock Sliders vs. Side Steps\u003c\/h2\u003e\u003cp\u003eChoose these if protection and clearance matter more than having a wide daily step. A side step is easier for entry and exit; a true rock slider is built around taking trail contact and protecting the rocker area.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation is bolt-on with no cutting or drilling required. This version fits 2-door Broncos only and does not fit 4-door Bronco or Bronco Sport.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default Title","offer_id":43684407476298,"sku":"RS1-M2","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-rock-sliders-2-door-1489050.jpg?v=1781029448"},{"product_id":"ford-bronco-2-door-side-steps-turn-offroad","title":"2021-2027 Ford Bronco 2-Door Side Steps | Turn Offroad","description":"\u003ch2\u003eFord Bronco Side Step Fitment\u003c\/h2\u003e\u003cp\u003eTurn Offroad 2-door Ford Bronco side steps fit 2021-2027 models and follow the shorter rocker length of the 2-door body. They hide the factory pinch weld and add a solid step without the bulk of a full rock slider.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\u003cp\u003e2-door Bronco owners who want easier cab entry, a cleaner pinch-weld area, and a higher step that does not hang as low as a traditional running board.\u003c\/p\u003e\n\u003ch2\u003eSide Step Design \u0026amp; Grip\u003c\/h2\u003e\u003cp\u003eThe boxed steel construction uses CNC-cut drainage holes to clear mud and trail debris. The textured tread gives boots more grip, and the three-stage nano-textured powder coat helps protect the steel from weather and chips.\u003c\/p\u003e\n\u003ch2\u003eSide Steps vs. Rock Sliders\u003c\/h2\u003e\u003cp\u003eThese are side steps first. They add light protection around the rocker area, but they are not built to replace a dedicated rock slider for hard rock contact.\u003c\/p\u003e\n\u003ch2\u003eDoor \u0026amp; Tire Fitment\u003c\/h2\u003e\u003cp\u003eThe steps clear tires up to 38 inches. This version fits 2-door Bronco only and does not fit 4-door Bronco or Bronco Sport.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation is bolt-on with no cutting or drilling required. Turn lists about 1 hour for installation.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default Title","offer_id":43684407509066,"sku":"SS1-M2","price":489.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-side-step-2-door-7156303.jpg?v=1781029252"},{"product_id":"dv8-pinch-weld-covers-4-door-ford-bronco","title":"2021-2026 Ford Bronco Pinch Weld Covers, 4-Door | DV8 Offroad","description":"\u003ch3\u003eSteel Covers That Clean Up the Exposed Pinch Weld on Your 4-Door Bronco\u003c\/h3\u003e\n\n\u003cp\u003eThe DV8 Offroad Pinch Weld Covers are built for 4-door 2021-2026 Ford Bronco owners who are not running factory or aftermarket sliders and want to clean up the visibly unfinished pinch weld on the bottom edge of the body. The covers are slightly taller than the pinch weld itself to add a layer of protection to the body edge. A DV8 logo is laser cut toward the rear of each cover, letting your Bronco's paint color show through for a unique finished look. Black allen head hardware keeps the mounting clean and flush. Fully bolt-on, direct-fit. Only compatible with the DV8 SRBR-02 slider, not with any factory slider or other aftermarket rock rail.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat It Does\u003c\/strong\u003e\u003cbr\u003e\nPowder coated steel covers that snap over and protect the exposed pinch weld on the bottom body edge. Laser cut DV8 logo lets body color show through at the rear. Slightly taller than the pinch weld for added edge protection. Black allen head hardware included. Install rated at 1.5 hours.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003e\nFits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 4-door only, all trims. Compatible with DV8 SRBR-02 slider only. Does NOT fit with factory sliders or any other aftermarket rock rail. Does NOT fit 2-door Bronco models. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003cbr\u003e\n4-door models only. Only compatible with DV8 SRBR-02. Will not work with factory sliders or other aftermarket rock rails. For 2-door pinch weld covers, see SRBR-06.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver side pinch weld cover\u003c\/li\u003e\n\u003cli\u003ePassenger side pinch weld cover\u003c\/li\u003e\n\u003cli\u003eBlack allen head hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eLogo: Laser cut DV8 logo, body color shows through\u003c\/li\u003e\n\u003cli\u003eHeight: Slightly taller than pinch weld for edge protection\u003c\/li\u003e\n\u003cli\u003eHardware: Black allen head included\u003c\/li\u003e\n\u003cli\u003eCompatible slider: DV8 SRBR-02 only\u003c\/li\u003e\n\u003cli\u003eInstall: Fully bolt-on, direct-fit\u003c\/li\u003e\n\u003cli\u003eInstall time: 1.5 hours\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eSKU: SRBR-03\u003c\/li\u003e\n\u003cli\u003eUPC: 810087811969\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eWARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/em\u003e\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43715592519754,"sku":"SRBR-03","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/Cw7gRfww.jpg?v=1781712179"},{"product_id":"dv8-pinch-weld-covers-2-door-ford-bronco","title":"2021-2026 Ford Bronco Pinch Weld Covers, 2-Door | DV8 Offroad","description":"\u003ch3\u003eSteel Covers That Clean Up the Exposed Pinch Weld on Your 2-Door Bronco\u003c\/h3\u003e\n\n\u003cp\u003eThe DV8 Offroad 2-Door Pinch Weld Covers are built for 2-door 2021-2026 Ford Bronco owners who want to clean up the visibly unfinished pinch weld on the bottom edge of the body. The covers are slightly taller than the pinch weld to protect the body edge. A DV8 logo is laser cut toward the rear of each cover, letting your Bronco's paint color show through. Black allen head hardware keeps the mounting clean. Fully bolt-on, direct-fit. Compatible with DV8 OE Steps, factory Ford steps, and the DV8 SRBR-02. Does NOT work with factory rock sliders.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat It Does\u003c\/strong\u003e\u003cbr\u003e\nPowder coated steel covers that clean up the exposed pinch weld on the bottom body edge. Laser cut DV8 logo shows body color through the cutout at the rear. Slightly taller than the pinch weld for edge protection. Black allen head hardware included. Install rated at 1.5 hours.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003e\nFits 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 2-door only, all trims. Compatible with DV8 OE Steps, factory Ford steps, and DV8 SRBR-02. Does NOT work with factory rock sliders. Does NOT fit 4-door Bronco models. Does NOT fit Ford Bronco Sport.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003cbr\u003e\n2-door models only. Compatible with DV8 OE Steps and factory Ford steps. Will NOT work with factory rock sliders. For 4-door pinch weld covers, see SRBR-03.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver side 2-door pinch weld cover\u003c\/li\u003e\n\u003cli\u003ePassenger side 2-door pinch weld cover\u003c\/li\u003e\n\u003cli\u003eBlack allen head hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Micro-texture black powder coat\u003c\/li\u003e\n\u003cli\u003eLogo: Laser cut DV8 logo, body color shows through\u003c\/li\u003e\n\u003cli\u003eHeight: Slightly taller than pinch weld for edge protection\u003c\/li\u003e\n\u003cli\u003eHardware: Black allen head included\u003c\/li\u003e\n\u003cli\u003eCompatible with: DV8 OE Steps, factory Ford steps, DV8 SRBR-02\u003c\/li\u003e\n\u003cli\u003eNOT compatible with: Factory rock sliders\u003c\/li\u003e\n\u003cli\u003eInstall: Fully bolt-on, direct-fit\u003c\/li\u003e\n\u003cli\u003eInstall time: 1.5 hours\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eSKU: SRBR-06\u003c\/li\u003e\n\u003cli\u003eUPC: 810087812683\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eWARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/em\u003e\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43715592650826,"sku":"SRBR-06","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/MBUA4mMw.jpg?v=1781712420"},{"product_id":"dv8-trailing-arm-skid-plates-bronco-spbr-05","title":"2021-2026 Ford Bronco Trailing Arm Skids (w\/ OEM Skid) | DV8 Offroad","description":"\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThis pair of Trailing Arm Skid Plates from DV8 Offroad is built for 2021, 2022, 2023, 2024, 2025, and 2026 Ford Broncos that already have the factory welded skid plate on the trailing arm mount. Not every Bronco came from Ford with that welded skid in place, so it's worth checking your truck before ordering. DV8 sells a second version of this part, SPBR-06, built for Broncos that never got the factory welded skid at all.\u003c\/p\u003e\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eThe trailing arm mount sits among the lowest points on the entire frame, and even with the factory welded skid already there, it's a common spot for a rock strike on technical terrain. DV8's wraparound design bolts on top of the existing OEM skid and adds another layer of steel protection rather than replacing what's already there. The finish is the same micro-texture black powder coat DV8 uses across its Bronco parts, so the added plate blends with the factory undercarriage instead of standing out as an obvious bolt-on.\u003c\/p\u003e\n\u003ch3\u003eProtection\u003c\/h3\u003e\n\u003cp\u003eGetting hung up on a rock at the trailing arm mount is one of the more common complaints among Bronco owners running technical trails, since this exact spot catches obstacles that the rest of the undercarriage clears without issue. Even with the factory welded skid already covering the mount, a hard enough strike can still damage it over time. This wraparound plate spreads that impact across more surface area and adds a second layer between the rock and the frame pocket underneath, cutting down on the wear the factory skid takes on its own.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation requires minor drilling but doesn't need a gas tank drop, since the factory welded skid already provides a mounting reference point this plate wraps around. Most owners get both sides done in about ninety minutes. Bronco Forge stocks this DV8 Offroad Trailing Arm Skid Plate set for Ford Bronco owners whose trucks already have the OEM welded skid and want a second layer of protection at that low, exposed mounting point. Confirm your Bronco has the factory welded skid before ordering, since running this version on a truck without it means the plate has nothing to wrap around. DV8 backs the pair with a 1-year warranty, and the part carries SKU SPBR-05. Between this version and SPBR-06, the deciding factor is always what's already bolted to the truck rather than personal preference, so a quick look underneath before checkout saves a return down the line. Owners who bought their Bronco used and aren't sure which configuration it left the factory with can check by looking directly at the trailing arm mount from underneath the truck; the factory welded skid, when present, is easy to spot once you know where to look. A flashlight and a few minutes on the ground under the rear of the truck is all it takes to confirm which version applies.\u003c\/p\u003e\n\u003cp\u003eWARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43715594125386,"sku":"SPBR-05","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/SA7U37mA.jpg?v=1781712801"}],"url":"https:\/\/broncoforge.com\/collections\/ford-bronco-protection.oembed?page=5","provider":"BRONCO FORGE","version":"1.0","type":"link"}