{"title":"Fog Lights for the 2021-2026 Ford Bronco","description":"\u003cp\u003eFord Bronco fog light searches run into one wall fast: the factory Standard or Capable bumper uses a small, square-cornered opening with a factory connector already in place, and the HD Modular bumper uses a completely different round opening with no factory fog light wiring run to it at all. A fog light built for one bumper does not fit the other, and the Bronco Raptor uses the same round opening as the HD Modular bumper.\u003c\/p\u003e\u003cp\u003eInstall method follows the bumper. Fog lights built for the Standard or Capable bumper plug straight into the factory connector, so installing one is a bolt-in job. Fog lights built for the HD Modular bumper route through a wiring splice into the truck's harness instead, since that bumper never shipped with fog light wiring to begin with.\u003c\/p\u003e\u003cp\u003eFeatures that separate an upgraded fog light from a factory halogen unit: wider beam patterns that light the road edges instead of throwing a narrow hot spot, switchable white and yellow or amber output on some models, and SAE or ECE-compliant beams that stay street legal.\u003c\/p\u003e\u003cp\u003eEvery fog light at Bronco Forge lists which bumper it fits and what the install involves before checkout, covering both 2-door and 4-door 2021-2026 Bronco builds. Free shipping on orders over $150. Text \u003ca href=\"tel:9097728050\"\u003e(909) 772-8050\u003c\/a\u003e with your year, trim, and bumper type and we confirm fitment before you order.\u003c\/p\u003e","products":[{"product_id":"2021-2026-ford-bronco-led-fog-lights-raxiom","title":"2021-2026 Ford Bronco LED Fog Lights | Raxiom","description":"\u003ch3\u003eFog Lights That Bolt Into Your Bronco's Factory Modular Bumper\u003c\/h3\u003e\u003cp\u003eThese Raxiom LED fog lights are built to slot directly into the fog light openings on your Bronco's factory Modular Front Bumper, so the fit looks close to stock instead of bolted on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRun White or Amber, Your Choice\u003c\/strong\u003e\u003cbr\u003eEach light can be wired to run as a white fog light or an amber running light. Broncos with the factory auxiliary switches use the included splice block to control them from those switches. Broncos without the switches splice into the headlight harness instead. You pick one function at install, not both at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to Handle the Elements\u003c\/strong\u003e\u003cbr\u003eHousings are black ABS plastic with clear polycarbonate lenses, and each unit is weather-sealed to keep moisture and dirt off the electronics inside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIndependent Beam Adjustment\u003c\/strong\u003e\u003cbr\u003eEach light adjusts on its own, so you can angle one for close-in visibility and one further out down the trail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eFits 2021-2026 Ford Bronco equipped with the factory Modular Front Bumper, excluding Raptor. Sold as a pair, driver and passenger side included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore You Order\u003c\/strong\u003e\u003cbr\u003eInstall involves splicing into your Bronco's wiring and pulling back a wheel liner to route the harness. Budget about 2 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDriver side and passenger side fog light\u003c\/li\u003e\n\u003cli\u003e2 Y-harnesses\u003c\/li\u003e\n\u003cli\u003eWiring harness\u003c\/li\u003e\n\u003cli\u003eSplice block\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKey Specs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLighting: LED, switchable white fog or amber running light\u003c\/li\u003e\n\u003cli\u003eHousing: Black ABS plastic\u003c\/li\u003e\n\u003cli\u003eLens: Clear polycarbonate\u003c\/li\u003e\n\u003cli\u003eInstall time: About 2 hours, light to moderate difficulty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raxiom","offers":[{"title":"Default Title","offer_id":43808767672394,"sku":"RAX-FB29715","price":284.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/FB29715_alt10_957953bd-f785-42bf-b270-e06fe8a4d7ad.webp?v=1784070180"},{"product_id":"2021-2026-ford-bronco-xb-evo-led-fog-lights-white-set-morimoto","title":"2021-2026 Ford Bronco LED Fog Lights (White, Set) | Morimoto XB Evo","description":"\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThese fog lights are built by Morimoto for the 2021 Ford Bronco, the 2022 Ford Bronco, the 2023 Ford Bronco, the 2024 Ford Bronco, the 2025 Ford Bronco, and the 2026 Ford Bronco, but only on Broncos with the factory Standard or Capable front bumper. The HD Modular bumper, which many Badlands, Wildtrak, and Sasquatch-package Broncos come with, uses round fog light openings this housing does not fit, and the Bronco Raptor shares that same modular bumper shape. Check which bumper is on the truck before ordering. Standard and Capable bumpers use the factory square-cornered fog light housing this light bolts into, and this is a direct replacement for the halogen unit that ships there from the factory.\u003c\/p\u003e\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eEach housing uses Osram Oslon-PL LED chips paired with an SAE wide-beam optic engineered in house by Morimoto's lead optical engineer. The beam spreads 90 degrees total, 45 degrees left to 45 degrees right of center, noticeably wider than most aftermarket fog lights that top out closer to 80 degrees. Vertical spread runs about 6 degrees, low enough to stay out of oncoming drivers' eyes while still lighting the sides of the road rather than throwing light straight out like a driving light would. Output measures 1,500 raw lumens and 8,500 candela per light, and the beam meets SAE J583 F3 and ECE R19 standards for road use in North America and the EU. The interior finish is gloss black with a textured pattern behind the lens, and an integrated aiming adjuster lets the beam height get dialed in after install without pulling the housing back out.\u003c\/p\u003e\n\u003ch3\u003eElectronics\u003c\/h3\u003e\n\u003cp\u003eEach fog light plugs into the factory H11, H9, or H8 connector, so there's no wiring to cut or splice. Power draw is 20.5 watts per side. The housing bolts into the factory fog light opening using the stock mounting points, so the factory wiring and dash switch keep working exactly as before, just aimed through a different lens and chip than the factory halogen bulb they came with. Because nothing about the factory wiring changes, the rest of the truck's fog light circuit, including the switch, fuse, and any factory warranty tied to it, is left alone.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation uses the factory mounting screws and connector, so it's a direct bolt-in at the fog light opening with no cutting, drilling, or splicing required. Two 10mm mounting screws per side hold the housing in place, and a matched H11, H9, or H8 connector is included for each light. Morimoto backs this fog light with a ten-year warranty.\u003c\/p\u003e\n\u003cp\u003eThe factory halogen fog light on a Standard or Capable bumper Bronco throws a narrower, dimmer beam and doesn't hold up to UV exposure the way an LED chip does over time. This housing trades that halogen bulb for the Osram LED array without changing the beam's basic job, lighting the road edges in fog, rain, or snow rather than blinding oncoming traffic.\u003c\/p\u003e\n\u003cp\u003eDoes NOT fit Ford Bronco Sport.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default","offer_id":44115289931850,"sku":"LF090","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/119818.010.jpg?v=1787798814"},{"product_id":"2021-2026-ford-bronco-xb-evo-led-fog-lights-white-yellow-set-morimoto","title":"2021-2026 Ford Bronco LED Fog Lights (White\/Yellow) | Morimoto XB Evo+","description":"\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThese fog lights are built by Morimoto for the 2021 Ford Bronco, the 2022 Ford Bronco, the 2023 Ford Bronco, the 2024 Ford Bronco, the 2025 Ford Bronco, and the 2026 Ford Bronco, but only on Broncos with the factory Standard or Capable front bumper. The HD Modular bumper, which many Badlands, Wildtrak, and Sasquatch-package Broncos come with, uses round fog light openings this housing does not fit, and the Bronco Raptor shares that same modular bumper shape. Check which bumper is on the truck before ordering. Standard and Capable bumpers use the factory square-cornered fog light housing this light bolts into, and this is a direct replacement for the halogen unit that ships there from the factory.\u003c\/p\u003e\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eThis Evo+ version switches between white and yellow output without a separate bulb or a yellow film over the lens. White output comes from Osram Oslon Compact PL chips rated at 1,500 raw lumens and 8,500 candela per light. Yellow output comes from Nichia NCSY131 chips rated at 1,250 raw lumens and 7,000 candela per light. Both colors share the same SAE wide-beam optic, so the beam pattern and width stay consistent no matter which color is selected, a distinction Morimoto notes most switchable fog lights on the market don't manage. The beam spreads 90 degrees total, 45 degrees left to 45 degrees right of center, and both white and yellow modes are SAE J583 F3 and ECE R19 compliant, which Morimoto markets as the only dual-color fog light on the market compliant in both colors. The interior finish is gloss black with a textured pattern, and an integrated aiming adjuster lets the beam height get dialed in after install.\u003c\/p\u003e\n\u003ch3\u003eElectronics\u003c\/h3\u003e\n\u003cp\u003eEach fog light plugs into the factory H11, H9, or H8 connector, so there's no wiring to cut or splice. Power draw is 20.5 watts per side regardless of which color is active. The housing bolts into the factory fog light opening using the stock mounting points, so the factory wiring and dash switch keep working exactly as before.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation uses the factory mounting screws and connector, so it's a direct bolt-in at the fog light opening with no cutting, drilling, or splicing required. Two 10mm mounting screws per side hold the housing in place, and a matched H11, H9, or H8 connector is included for each light. Morimoto backs this fog light with a ten-year warranty.\u003c\/p\u003e\n\u003cp\u003eThe factory halogen fog light on a Standard or Capable bumper Bronco only comes in one color and throws a narrower, dimmer beam than an LED chip. This housing trades that single-color halogen bulb for a chip that switches colors on demand, useful for drivers who want yellow output in snow or heavy fog and white output the rest of the time, without buying two separate fog lights.\u003c\/p\u003e\n\u003cp\u003eManufacturer country of origin is Taiwan, and each set weighs about 1.7 pounds total, light enough that shipping damage is rarely an issue.\u003c\/p\u003e\n\u003cp\u003eDoes NOT fit Ford Bronco Sport.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default","offer_id":44115290030154,"sku":"LF091","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/132333.010.jpg?v=1787798830"},{"product_id":"2021-2026-ford-bronco-xb-led-fog-lights-white-output-set-morimoto","title":"2021-2026 Ford Bronco LED Fog Lights (White, Set) | Morimoto XB","description":"\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThese fog lights are built by Morimoto for the 2021 Ford Bronco, the 2022 Ford Bronco, the 2023 Ford Bronco, the 2024 Ford Bronco, the 2025 Ford Bronco, and the 2026 Ford Bronco, but only on Broncos with the factory Standard or Capable front bumper. The HD Modular bumper, which many Badlands, Wildtrak, and Sasquatch-package Broncos come with, uses round fog light openings this housing does not fit, and the Bronco Raptor shares that same modular bumper shape. Check which bumper is on the truck before ordering. Standard and Capable bumpers use the factory square-cornered fog light housing this light bolts into, using the same stock mounting locations as the factory halogen unit.\u003c\/p\u003e\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eThe housing is powder-coated cast aluminum, and the lens is UV-resistant polycarbonate. Three Nichia 5500K LED chips sit behind projector-based optics on each side, producing about 1,200 raw lumens per side and roughly 2,400 lumens combined once focused through the projector lens. The beam is built wide rather than narrow and deep, so it lights the road edges rather than reflecting fog back at the driver the way an overly bright, narrow beam can. The aluminum housing doubles as a heat sink for the LED chips and is built stronger than a plastic housing of the same size, while sealing the internals against moisture and road debris. An integrated height adjuster lets the beam get dialed in after install, and the input connector accepts an H11 male plug, matching the factory fog light circuit on the Bronco without an adapter.\u003c\/p\u003e\n\u003ch3\u003eElectronics\u003c\/h3\u003e\n\u003cp\u003eEach fog light plugs into the factory H11 connector. A plug-and-play connection kit is included with all necessary connectors, rubber seals, and pigtails, so no wiring gets cut or spliced anywhere in the install. The light meets SAE, DOT, and ECE regulations for road use, and the connector, seals, and pigtails included in the box are matched to the factory Bronco fog light circuit rather than a universal kit that needs modification to fit.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation is a direct bolt-in at the factory fog light opening, using the stock mounting locations and the included connection kit, with no cutting, drilling, or splicing required. Morimoto backs this fog light with a ten-year warranty.\u003c\/p\u003e\n\u003cp\u003eThe factory halogen fog light on a Standard or Capable bumper Bronco uses a plastic reflector housing and a bulb with a shorter service life than an LED chip. This housing trades that halogen bulb and plastic reflector for a projector-based LED setup in an aluminum housing, aimed at the same job of lighting the road edges in fog, rain, or snow.\u003c\/p\u003e\n\u003cp\u003eThis white-output model is also available with a factory-installed yellow output option using 3000K LED chips instead of the standard 5500K chips, listed separately. Each set weighs about 2 pounds and ships as a pair, one light per side, sized to fill the same opening the factory fog light already sits in without any trimming of the bumper or fascia.\u003c\/p\u003e\n\u003cp\u003eDoes NOT fit Ford Bronco Sport.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default","offer_id":44115290095690,"sku":"LF010","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/28596.010.jpg?v=1787798847"},{"product_id":"2021-2026-ford-bronco-xb-led-fog-lights-yellow-output-set-morimoto","title":"2021-2026 Ford Bronco LED Fog Lights (Yellow, Set) | Morimoto XB","description":"\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThese fog lights are built by Morimoto for the 2021 Ford Bronco, the 2022 Ford Bronco, the 2023 Ford Bronco, the 2024 Ford Bronco, the 2025 Ford Bronco, and the 2026 Ford Bronco, but only on Broncos with the factory Standard or Capable front bumper. The HD Modular bumper, which many Badlands, Wildtrak, and Sasquatch-package Broncos come with, uses round fog light openings this housing does not fit, and the Bronco Raptor shares that same modular bumper shape. Check which bumper is on the truck before ordering. Standard and Capable bumpers use the factory square-cornered fog light housing this light bolts into, using the same stock mounting locations as the factory halogen unit.\u003c\/p\u003e\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eThe housing is powder-coated cast aluminum, and the lens is UV-resistant polycarbonate. Three Nichia 3000K LED chips sit behind projector-based optics on each side, producing about 1,200 raw lumens per side and roughly 2,400 lumens combined once focused through the projector lens. The beam is built wide rather than narrow and deep, so it lights the road edges rather than reflecting fog back at the driver the way an overly bright, narrow beam can. The aluminum housing doubles as a heat sink for the LED chips and is built stronger than a plastic housing of the same size, while sealing the internals against moisture and road debris. An integrated height adjuster lets the beam get dialed in after install, and the input connector accepts an H11 male plug, matching the factory fog light circuit on the Bronco without an adapter.\u003c\/p\u003e\n\u003ch3\u003eElectronics\u003c\/h3\u003e\n\u003cp\u003eEach fog light plugs into the factory H11 connector. A plug-and-play connection kit is included with all necessary connectors, rubber seals, and pigtails, so no wiring gets cut or spliced anywhere in the install. The light meets SAE, DOT, and ECE regulations for road use, and the connector, seals, and pigtails included in the box are matched to the factory Bronco fog light circuit rather than a universal kit that needs modification to fit.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation is a direct bolt-in at the factory fog light opening, using the stock mounting locations and the included connection kit, with no cutting, drilling, or splicing required. Morimoto backs this fog light with a ten-year warranty.\u003c\/p\u003e\n\u003cp\u003eThe factory halogen fog light on a Standard or Capable bumper Bronco uses a plastic reflector housing and a bulb with a shorter service life than an LED chip. This housing trades that halogen bulb and plastic reflector for a projector-based LED setup in an aluminum housing, aimed at the same job of lighting the road edges in fog, rain, or snow.\u003c\/p\u003e\n\u003cp\u003eThis yellow-output model is also available with the standard 5500K white output option instead of the 3000K chips used here, listed separately. Each set weighs about 2 pounds and ships as a pair, one light per side, sized to fill the same opening the factory fog light already sits in without any trimming of the bumper or fascia.\u003c\/p\u003e\n\u003cp\u003eDoes NOT fit Ford Bronco Sport.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default","offer_id":44115290128458,"sku":"LF011","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/28597.010.jpg?v=1787798863"}],"url":"https:\/\/broncoforge.com\/collections\/ford-bronco-fog-lights.oembed","provider":"BRONCO FORGE","version":"1.0","type":"link"}