{"title":"Steel Bumpers for the 2021-2027 Ford Bronco","description":"\u003cp\u003eFord Bronco bumpers for a front-end upgrade, a replacement rear bumper, or a more coordinated trail build. Available designs differ in steel plate and tube designs by the coverage, clearance, lighting locations, and recovery features they provide. A front winch bumper and a rear bumper that clears a larger spare solve different problems, so choose each around the equipment you plan to keep or add.\u003c\/p\u003e\u003cp\u003eA key difference in this category is the job you need the bumper to do. For a recovery-focused setup, check the winch plate, fairlead position, recovery mounts, and the space available for the winch itself. For a daily-driven Bronco, consider parking sensors, adaptive cruise control, front-camera visibility, and access to the factory hitch. A hoop, skid plate, light, or tire carrier shown in an installed photo is not automatically included; compare the contents list for the exact version.\u003c\/p\u003e\u003cp\u003eRelated selections include \u003ca href=\"\/collections\/ford-bronco-front-bumpers\"\u003eFord Bronco front bumpers\u003c\/a\u003e for winch mounting and front protection, or \u003ca href=\"\/collections\/ford-bronco-rear-bumpers\"\u003erear bumpers\u003c\/a\u003e for spare-tire clearance and rear coverage. Owners of the wider model should start with \u003ca href=\"\/collections\/ford-bronco-raptor-bumpers\"\u003eBronco Raptor bumpers\u003c\/a\u003e. Use each listing's model years and equipment notes before ordering. A bumper family name alone does not establish compatibility with every trim, skid, sensor, or accessory.\u003c\/p\u003e\u003cp\u003eWinch openings, recovery mounts, sensor provisions, and accessory brackets are design-specific, not universal features of every bumper or mounting system. Related components often require a particular base part. The product details distinguish complete assemblies from supporting hardware sold separately.\u003c\/p\u003e\u003cp\u003eThe actual part description provides the application details, included equipment, and limitations specific to that product. These differences matter more than treating a collection as one interchangeable group of parts.\u003c\/p\u003e\u003cp\u003eThe available components differ by function, included equipment, and installation requirements. Individual product specifications provide the most precise information for each listed part.\u003c\/p\u003e\u003ch2\u003e6th-Gen Ford Bronco Fitment\u003c\/h2\u003e\u003cp\u003eThis collection may include parts for the \u003cstrong\u003e2021, 2022, 2023, 2024, 2025, 2026, and 2027 Ford Bronco\u003c\/strong\u003e.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore trims:\u003c\/strong\u003e Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-road and specialty models:\u003c\/strong\u003e Everglades, Bronco Raptor, Stroppe Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeritage and limited editions:\u003c\/strong\u003e First Edition, Heritage Edition, Heritage Limited Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2027 special models:\u003c\/strong\u003e Bronco RTR and Bronco Filson\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment varies by model year, trim, door count, roof type, factory bumper, and package. Individual product listings provide specific compatibility details for the Bronco configuration involved.\u003c\/p\u003e","products":[{"product_id":"dv8-tube-series-front-bumper-ford-bronco-raptor","title":"2022-2027 Ford Bronco Raptor Front Bumper | DV8 Offroad Tube Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Tube Series Bronco Raptor front bumper, FBFR-02, is built for 2022–2026 Ford Bronco Raptor four-door models. It is the Raptor-specific version, not the standard-Bronco FBBR-08. The supplied full skid replaces the factory skid plate, and the factory fog lights do not transfer.\u003c\/p\u003e\u003cp\u003eDV8's current application ends at 2026. Confirm compatibility before ordering for a 2027 Bronco Raptor rather than assuming that the earlier-year listing covers it.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis bumper suits a Bronco Raptor build focused on a prerunner appearance, front-end clearance, and a broad range of lighting layouts. The tube design keeps the visual emphasis on the Raptor's stance, with contrasting skid panels and an orange R accent.\u003c\/p\u003e\u003cp\u003eChoose it for those features and its steel recovery hooks. If your priority is an integrated winch mount, compare the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco-raptor\"\u003eRaptor Spec Series winch bumper\u003c\/a\u003e. The two bumpers serve different build priorities even though both add skid protection.\u003c\/p\u003e\n\n\u003ch2\u003eTube Design and Vented Skid Protection\u003c\/h2\u003e\n\u003cp\u003eThe assembly uses steel plate and tubing, finished in micro-texture black powder coat. Gray skid panels, CNC logo end caps, and the orange R panel distinguish this version from the standard Bronco tube bumper.\u003c\/p\u003e\u003cp\u003eA vented full skid covers the area below the bumper. Its openings preserve airflow through that section while the plate provides a barrier against trail debris. The high, tight bumper shape is intended to provide room around rocks and ledges without placing a large plate face far ahead of your Bronco.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eSeveral mounting locations let you build the lighting around your needs. The center, wings, and push bar have different capacities, so choose the location along with the light.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter:\u003c\/strong\u003e A 20-inch dual-row bar plus a pair of 3-inch pods, or six 3-inch pods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide mounts:\u003c\/strong\u003e One 3-inch pod per side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded push bar:\u003c\/strong\u003e A 20-inch single- or dual-row bar, four 7-inch round lights, or eight 3-inch pods.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese are mounting provisions. Lights and their required wiring are purchased separately.\u003c\/p\u003e\n\n\u003ch2\u003ePush Bar, Camera, and ACC Requirements\u003c\/h2\u003e\n\u003cp\u003eThe push bar is included, but installing it is optional. Running it partially obstructs the factory front camera. DV8 lists the ABBR-05 camera-relocation kit for the Bronco and Bronco Raptor Tube Series bumpers with the push-bar option.\u003c\/p\u003e\u003cp\u003eYour Bronco Raptor's adaptive cruise control requires the separately sold ABBR-01 relocation bracket. Factory parking sensors are retained. Plan the hoop, camera, and ACC parts together so you can complete the electronics work while the front bumper is apart.\u003c\/p\u003e\n\n\u003ch2\u003eHow Do the Recovery Hooks Mount?\u003c\/h2\u003e\n\u003cp\u003eThe supplied solid steel recovery hooks bolt directly to the frame. They preserve front recovery attachment options as the factory bumper assembly is replaced. Select compatible recovery gear and inspect the attachment hardware as directed during installation.\u003c\/p\u003e\u003cp\u003eThe hooks and lighting mounts have different jobs. Avoid treating a tube or light bracket as a recovery point; use the designated recovery attachments.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates roughly four hours for the bolt-on installation, with help needed to remove and position the bumpers. The \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBFR-02_Install_Guide.pdf?v=16428136882373551109\"\u003eFBFR-02 installation guide\u003c\/a\u003e walks through assembly and sensor transfer. It notes that some sensor-bezel tabs may need careful trimming, even though the bumper mounting itself requires no cutting.\u003c\/p\u003e\u003cp\u003eArrange your selected lights and relocation parts before starting. Adding them during assembly can make routing the wiring easier to plan.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Raptor Tube Series bumper assembly, full skid, steel recovery hooks, optional bolt-on push bar, accent panels, and installation hardware. Auxiliary lights and the ACC and camera relocation brackets are separate purchases. Check the guide for the detailed hardware inventory.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 backs the bumper with a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Keep your receipt and consult the full warranty terms for coverage limits and the claim process.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43524584964170,"sku":"FBFR-02","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbfr-02-tube-series-bumper-uninstalled-product-shot.jpg?v=1788231572"},{"product_id":"ford-bronco-tube-series-front-bumper","title":"2021-2027 Ford Bronco Front Bumper | DV8 Offroad Tube Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Tube Series Bronco front bumper, FBBR-08, fits 2021–2026 Ford Bronco two-door and four-door models, excluding Raptor. It replaces the factory front bumper and skid plate, with a full front skid supplied as part of the new assembly. Factory fog lights do not transfer to this bumper.\u003c\/p\u003e\u003cp\u003eFor a Raptor, choose the \u003ca href=\"\/products\/dv8-tube-series-front-bumper-ford-bronco-raptor\"\u003eRaptor Tube Series bumper\u003c\/a\u003e. DV8 currently lists this standard-Bronco version through 2026; confirm a 2027 application before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose this bumper if your Bronco build centers on front-end clearance, a tube-style appearance, and flexible trail lighting. The open tubular layout gives it a different look from the plate-style OE Plus bumpers, while the included skid covers the area underneath.\u003c\/p\u003e\u003cp\u003eIts included light hoop can be installed or left off, giving you a meaningful choice in both appearance and lighting capacity. Owners prioritizing a built-in winch mount should compare the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco\"\u003eSpec Series winch bumper\u003c\/a\u003e before deciding.\u003c\/p\u003e\n\n\u003ch2\u003eHigh Clearance with a Full Skid\u003c\/h2\u003e\n\u003cp\u003eThe Tube Series combines steel tubing with 3.5mm and 5mm steel construction. Its high-clearance shape is designed to reduce the chance of the front bumper catching on technical trail obstacles. A micro-texture black powder coat and metallic gray accent panels finish the assembly.\u003c\/p\u003e\u003cp\u003eThe supplied front skid replaces your Bronco's original plate. Solid steel recovery points provide front recovery attachment locations. These features are part of the bumper design; choose recovery equipment suited to those attachment points and the recovery you are performing.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eThe bumper has separate center and wing mounting positions. That lets you select a main forward light arrangement while adding pods farther out on the bumper.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter:\u003c\/strong\u003e One 20-inch dual-row light bar or six 3-inch pods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWings:\u003c\/strong\u003e One 3-inch pod on each side, two total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded light hoop:\u003c\/strong\u003e One 20-inch single- or dual-row bar, four 7-inch round lights, or eight 3-inch pods.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLights are separate purchases. Check mounting dimensions and harness requirements for your chosen lights before assembling the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eDoes the Light Hoop Block the Camera?\u003c\/h2\u003e\n\u003cp\u003eInstalling the optional hoop obstructs your Bronco's front camera. Decide whether you want that extra lighting position before planning camera relocation. DV8 lists its ABBR-05 camera-relocation bracket for the FBBR-08 and FBFR-02 Tube Series bumpers with the push-bar option.\u003c\/p\u003e\u003cp\u003eFactory parking sensors are retained, with plugs supplied for vehicles without sensors. Adaptive cruise control requires the separately sold ABBR-01 relocation bracket. These are separate requirements: retaining parking sensors does not remove the need to address ACC or the camera.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about 4.5 hours for this bolt-on bumper installation. Arrange help for removing the factory bumper and positioning the steel replacement. Plan additional time for accessory wiring and any electronics relocation your Bronco needs.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-08_Install_Guide_Final.pdf?v=5592845093713631300\"\u003eFBBR-08 installation guide\u003c\/a\u003e first. Although the main mounting process requires no cutting, the guide notes that sensor-bezel tabs may need trimming. Test their fit carefully before final assembly.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe bumper assembly includes the full front skid, steel recovery points, bolt-on light hoop, mounting hardware, and sensor-hole plugs. The hoop is included; fitting it is optional. Auxiliary lights, wiring accessories, and the ACC and camera relocation brackets are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty covering defects in materials and workmanship from the purchase date. Review the manufacturer's full terms for limitations and claim requirements, and retain your receipt.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43531869945930,"sku":"FBBR-08","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-08-tube-series-bumper-uninstalled-product-shot.webp?v=1788231529"},{"product_id":"dv8-mto-v2-front-bumper-ford-bronco","title":"2021-2027 Ford Bronco Winch Front Bumper V2 | DV8 Offroad MTO Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad MTO V2 Bronco winch front bumper, FBBR-07, fits 2021–2026 Ford Bronco two-door and four-door models. DV8 explicitly includes Bronco Raptor applications from 2022. The bumper replaces the front assembly and retains the factory parking sensors, but factory fog lights do not transfer.\u003c\/p\u003e\u003cp\u003eDV8 currently lists the bumper through 2026. Confirm 2027 fitment before ordering. Skid compatibility also needs attention: reusing the factory skid requires minor trimming, and the optional Low Pro skid is not compatible with Bronco Raptor.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eMTO means Made to Overland. This version suits a Bronco build where you want winch capability with a recessed installation, front recovery attachments, and several lighting positions. The hidden winch mount keeps the recovery equipment tucked into the bumper layout.\u003c\/p\u003e\u003cp\u003eCompared with the non-winch OE Plus options, the MTO V2 is built around adding recovery equipment. Compared with a Tube Series bumper, it gives you a steel plate design with aluminum accents and an included bull bar.\u003c\/p\u003e\n\n\u003ch2\u003eHidden Winch Mount and Recovery Points\u003c\/h2\u003e\n\u003cp\u003eThe internal winch mount accepts a range of winches. Check your specific winch's mounting pattern, case dimensions, and access needs before choosing it. Two 1-inch-thick mounts accept 3\/4-inch D-ring shackles, giving you designated recovery attachment locations alongside the winch provision.\u003c\/p\u003e\u003cp\u003eThis bumper does not fit roller fairleads. DV8 recommends an iron or steel hawse fairlead when using steel cable. Include the correct fairlead in your plan rather than assuming every part of an existing winch setup will transfer.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit the Bumper and Bull Bar?\u003c\/h2\u003e\n\u003cp\u003eThe bumper's main center mount accepts a 20-inch single-row light bar, and its wing positions accept a pair of 3-inch pods, one per side. The included steel bull bar adds room for a 20-inch dual-row bar below it or up to seven 3-inch pods above it.\u003c\/p\u003e\u003cp\u003eThe optional LBUN-02 alternative bull bar has different lighting arrangements, but DV8 restricts that option to vehicles without adaptive cruise control. Choose your bull-bar configuration with your Bronco's electronics in mind. Lights and wiring are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eCamera, ACC, and Skid Requirements\u003c\/h2\u003e\n\u003cp\u003eYour Bronco's parking sensors are retained, but the front camera is obstructed. DV8 specifies its ABBR-03 camera-relocation solution and ABBR-01 ACC relocation bracket to retain the corresponding functions on equipped vehicles. Those parts are separate from the bumper.\u003c\/p\u003e\u003cp\u003eThe factory skid needs minor trimming for clearance. DV8's current listing recommends the SPBR-07 Low Pro skid as an alternative for applicable standard Broncos, while explicitly excluding Raptor from that skid's fitment. Bumper compatibility does not establish compatibility for every accessory paired with it.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe MTO V2 uses 3.5mm and 5mm steel with aluminum accent panels and a micro-texture black powder-coat finish. The combination gives your Bronco a plate-bumper appearance, with contrasting inserts around the lighting layout.\u003c\/p\u003e\u003cp\u003eWelded-in zip-tie tabs provide attachment points for wiring. Use them when organizing accessory harnesses so the winch and light wiring follows a planned route rather than hanging across the bumper openings.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates four to 4.5 hours for installation, with assistance for lifting and positioning the bumper. The assembly bolts on, but factory-skid trimming and possible sensor-bezel tab trimming mean it should not be described as universally modification-free.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-07_Install_Guide_Final.pdf?v=2364220283318980062\"\u003eMTO V2 installation guide\u003c\/a\u003e before starting. Arrange the winch, fairlead, lights, and relocation equipment first so their mounting and wiring can be addressed during assembly.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the bumper assembly, steel bull bar, aluminum accent panels, D-ring mounting points, and installation hardware. The winch, shackles, fairlead, lights, replacement skid, and electronics relocation accessories are separate purchases. Consult the guide for the full hardware inventory.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty against defects in materials and workmanship from the purchase date. Review its full terms for coverage limits and claim requirements, and keep your purchase record.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43550937219146,"sku":"FBBR-07","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-07-mto-v2-bumper-side-profile-product-shot.jpg?v=1788231464"},{"product_id":"dv8-rear-tube-bumper-ford-bronco","title":"2021-2027 Ford Bronco Rear Tube Bumper | DV8 Offroad","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Bronco rear tube bumper, RBBR-08, is listed for 2021–2026 Ford Bronco models. DV8 lists all trims and includes it in its Bronco Raptor rear-bumper range. The bumper works with the factory hitch and provides clearance for up to a 37-inch spare on the OEM carrier.\u003c\/p\u003e\u003cp\u003eCheck your parking-sensor equipment before ordering: equipped Broncos require the MCFSNSR-01 sensor kit. Confirm a 2027 application separately because DV8's current product listing ends at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis rear bumper suits a Bronco build where you want an open tube-style appearance instead of a broad plate face. Its prerunner design pairs rear light mounts with room for a larger spare, while keeping the factory hitch usable.\u003c\/p\u003e\u003cp\u003eIt is a styling and equipment choice distinct from the \u003ca href=\"\/products\/dv8-spec-series-rear-bumper-ford-bronco\"\u003eSpec Series rear bumper\u003c\/a\u003e, which specifically provides D-ring mounts. If designated rear recovery attachments are a priority, compare that feature before choosing your bumper.\u003c\/p\u003e\n\n\u003ch2\u003eTube Construction and Rear-End Layout\u003c\/h2\u003e\n\u003cp\u003eSteel tubing forms the main visual structure, with steel plate used in the assembly. The bumper has a micro-texture black powder-coat finish and CNC-etched logo detailing. The tube layout gives your Bronco a different rear profile from the MTO or Spec Series plate bumpers.\u003c\/p\u003e\u003cp\u003eWelded-in zip-tie tabs provide places to secure accessory wiring. Use those tabs to organize the harnesses for the rear lights rather than routing wiring loosely across the openings. Confirm clearance around the hitch and other equipment during final alignment.\u003c\/p\u003e\n\n\u003ch2\u003eWill a 37-Inch Spare Clear?\u003c\/h2\u003e\n\u003cp\u003eDV8 specifies clearance for up to a 37-inch spare mounted on the OEM tire carrier. That describes the space above the bumper; it does not increase the carrier's load rating or establish that every wheel-and-tire combination is suitable for the factory carrier.\u003c\/p\u003e\u003cp\u003eA larger spare can cover the third brake light. DV8 recommends a brake-light extension to retain full visibility with a 37-inch tire. Check the light, tailgate movement, and actual tire position when planning the complete spare-tire setup on your Bronco.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Rear Lights Fit?\u003c\/h2\u003e\n\u003cp\u003eThe bumper provides two mounting positions for 3-inch light pods, one toward each side. These let you add rear-facing lighting for trail use according to the lights and wiring arrangement you choose.\u003c\/p\u003e\u003cp\u003eThe pods are separate purchases. Choose compatible housings and mounting brackets, and plan how they will be switched before installation. Mounting provisions alone do not include the lights, harness, or electrical connections needed to operate them.\u003c\/p\u003e\n\n\u003ch2\u003eParking Sensors and License-Plate Wiring\u003c\/h2\u003e\n\u003cp\u003eBroncos with factory parking sensors require the separately purchased MCFSNSR-01 sensor kit for installation. Plugs are supplied for the sensor holes on vehicles without the feature. Identify your Bronco's sensor equipment before removing the original bumper.\u003c\/p\u003e\u003cp\u003eThe installation guide also covers license-plate relocation and its light wiring. The bumper's main mounts bolt on without cutting the vehicle structure, but that does not make the entire job wiring-free. Follow the guide's plate-light connection and harness-routing steps so the plate remains illuminated after relocation.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about three hours for installation. Arrange a second person to support the factory bumper during removal and help position the replacement. Allow time for sensor transfer, plate-bracket installation, and electrical work.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-08_Installation__Guide_Final.pdf?v=17870981561895878067\"\u003erear tube bumper installation guide\u003c\/a\u003e first. Check its parts inventory and routing instructions before starting, especially if your Bronco uses the factory parking sensors or you are adding auxiliary lights.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the rear tube bumper assembly, mounting hardware, sensor-hole plugs, and the license-plate relocation and lighting components shown in the guide. Auxiliary pods, the MCFSNSR-01 sensor kit, and a third brake-light extension are separate purchases. Check the guide for the detailed hardware list.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Retain your receipt and review the full terms for coverage limits and claim requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43576662196298,"sku":"RBBR-08","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/ob1wjWqw.jpg?v=1778203499"},{"product_id":"dv8-spec-series-rear-bumper-ford-bronco","title":"2021-2027 Ford Bronco Rear Bumper | DV8 Offroad Spec Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Spec Series Bronco rear bumper, RBBR-05, fits the 2021–2026 Ford Bronco, including Bronco Raptor models from 2022. DV8 explicitly lists compatibility with all trim levels. It works with the factory hitch and parking sensors and clears up to a 37-inch spare on the OEM carrier.\u003c\/p\u003e\u003cp\u003eDV8's current listing ends at 2026. Confirm compatibility before ordering for a 2027 Bronco or Bronco Raptor. Check any aftermarket tire-carrier or hitch changes separately from the stated factory-equipment fitment.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose the Spec Series if your Bronco needs a steel rear bumper with dedicated recovery attachments and added lighting positions. Its plate construction and satin black accents also make it a natural visual partner for the Spec Series front bumpers.\u003c\/p\u003e\u003cp\u003eThe rear bumper is not restricted to a matching front series. Its practical appeal is the combination of recovery mounts, pod-light positions, spare clearance, and factory-hitch compatibility. Compare those features with the open design of the rear tube bumper or the raised layout of the FS-15.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Protection with Satin Accents\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses 3.5mm and 5mm steel plate with a micro-texture black powder-coat finish. Satin black aluminum accent panels break up the steel face and match the design language used across the Spec Series.\u003c\/p\u003e\u003cp\u003eWelded-in zip-tie tabs provide places to secure aftermarket-light wiring. Plan the wiring path around your Bronco's hitch, spare, and bumper mounts before tightening the assembly. Keeping the harness organized helps you inspect and service the connections later.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery Mounts and Rear Lighting\u003c\/h2\u003e\n\u003cp\u003eTwo 1-inch-thick D-ring mounts provide designated recovery attachment positions. DV8 specifies that these mounts accept a 7\/8-inch pin; match your shackle hardware to that dimension rather than choosing by appearance alone. No recovery load rating is implied by the mount thickness.\u003c\/p\u003e\u003cp\u003eThe bumper also accepts two 3-inch light pods for rear-facing illumination. Lights and wiring are separate purchases. Choose the switching arrangement and mounting hardware with your intended use in mind before assembling the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eSpare-Tire and Third Brake-Light Clearance\u003c\/h2\u003e\n\u003cp\u003eDV8 lists room above the bumper for up to a 37-inch spare on the OEM carrier. With that tire size, it calls for a third brake-light extension to maintain full visibility of the light.\u003c\/p\u003e\u003cp\u003eSpare clearance is a measurement of available space, not an upgrade to the tailgate or carrier's weight capacity. Check the weight and position of your wheel-and-tire combination, along with any reinforcement or spacer requirements, before completing your Bronco's spare setup.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Stays?\u003c\/h2\u003e\n\u003cp\u003eThe bumper accommodates the factory hitch, rear parking sensors, trailer plugs, and license-plate lighting. Sensor locations allow the original parking sensors to be transferred rather than deleting the feature.\u003c\/p\u003e\u003cp\u003eThe guide includes license-plate relocation and wiring work. It also identifies trimming needed on certain sensor-bezel tabs to fit the thicker bumper material. That detail matters when planning the job: the main bumper mounts bolt on, but transferring every factory component can require additional work.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8's current listing and installation guide estimate approximately three hours, with two people for removal and installation. Assemble the bumper and organize the sensor harness before lifting it into place.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-05_Install_Guide__Final.pdf?v=2134070394149905159\"\u003eSpec Series rear bumper installation guide\u003c\/a\u003e before starting. Follow the plate-light wiring and harness-routing steps, then check sensor operation and plate illumination after the bumper is aligned and secured.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Spec Series rear bumper assembly, accent panels, D-ring mounts, mounting hardware, and license-plate relocation components described in the guide. Rear light pods, recovery shackles, and a third brake-light extension are separate purchases. Consult the guide for the full hardware inventory.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Keep your receipt and consult the complete terms for limitations, exclusions, and claim instructions.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43576667340874,"sku":"RBBR-05","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/sZVdEaZQ.jpg?v=1778204139"},{"product_id":"dv8-competition-series-rear-bumper-ford-bronco","title":"2021-2027 Ford Bronco Rear Bumper | DV8 Offroad Competition Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Competition Series Bronco rear bumper, RBBR-04, fits 2021–2026 Ford Bronco models, excluding Bronco Raptor. It works with the factory hitch and backup sensors and provides room for up to a 37-inch spare.\u003c\/p\u003e\u003cp\u003eDV8's fitment table specifically excludes Raptor, so the broad Bronco model range should not be read as Raptor compatibility. A 2027 application also needs confirmation because the manufacturer's current listing stops at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis bumper suits owners who want a low-profile, desert-racing-inspired rear end with added light mounts and spare-tire clearance. The tube-and-plate construction gives it a different appearance from a full plate bumper, while paintable aluminum panels let you personalize the accents.\u003c\/p\u003e\u003cp\u003eChoose it for those features rather than assuming it has every recovery provision found on other rear bumpers. The \u003ca href=\"\/products\/dv8-spec-series-rear-bumper-ford-bronco\"\u003eSpec Series\u003c\/a\u003e and \u003ca href=\"\/products\/dv8-mto-series-rear-bumper-ford-bronco\"\u003eMTO Series\u003c\/a\u003e are alternatives to compare when dedicated D-ring mounts are a priority.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Profile Tube and Plate Construction\u003c\/h2\u003e\n\u003cp\u003eThe Competition rear bumper combines steel tube with 3.5mm and 5mm steel plate. DV8 lists an approximate weight of 73 pounds. A micro-texture black powder-coat finish covers the main assembly, with aluminum accents toward each end.\u003c\/p\u003e\u003cp\u003eThe low-profile layout is intended to leave more room around trail obstacles at the rear of your Bronco. The aluminum panels can be painted to suit your build, allowing you to change the accent color while keeping the main black bumper finish.\u003c\/p\u003e\n\n\u003ch2\u003eWill a Larger Spare Clear?\u003c\/h2\u003e\n\u003cp\u003eDV8 specifies clearance for a spare up to 37 inches. Check that statement against your actual wheel offset, tire position, and carrier arrangement, particularly if your Bronco already has spacers or an aftermarket tire carrier.\u003c\/p\u003e\u003cp\u003eBumper clearance does not establish the load capacity of the factory carrier. A larger spare can also affect third brake-light visibility, so check the complete rear setup rather than treating the tire's nominal diameter as the only measurement that matters.\u003c\/p\u003e\n\n\u003ch2\u003eRear Lighting and Plate Relocation\u003c\/h2\u003e\n\u003cp\u003eThe bumper provides two mounts for 3-inch light pods, one toward each end. The installation guide illustrates flush-mount pods; confirm the mounting style and dimensions of your chosen lights before ordering.\u003c\/p\u003e\u003cp\u003eA tailgate-mounted license-plate bracket is included. Its light wiring and harness routing are part of the installation, not an optional detail to leave until after the bumper is fitted. Plan the plate position, spare tire, and rear lighting together so they do not compete for the same space.\u003c\/p\u003e\n\n\u003ch2\u003eWill My Bronco's Backup Sensors Work?\u003c\/h2\u003e\n\u003cp\u003eThe bumper has mounting holes for the original backup sensors, with plugs provided for Broncos without sensors. The factory hitch remains compatible, so replacing the bumper does not require replacing that hitch assembly.\u003c\/p\u003e\u003cp\u003eThe installation guide notes that some sensor-bezel tabs may need trimming to fit the thicker bumper material. Keep the sensors in their intended positions and orientations during transfer. Check their operation after installation rather than assuming that physical fit alone confirms correct operation.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates approximately four hours for installation, including minor wiring. The main bumper mounts bolt on, but the plate relocation, sensor transfer, and light connections make this more involved than simply exchanging two bare bumper shells.\u003c\/p\u003e\u003cp\u003eReview the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-04_Install_Guide_V3.pdf?v=11749956925827444686\"\u003eCompetition rear bumper installation guide\u003c\/a\u003e first. Arrange help for positioning the assembly and follow the instructions for routing the plate-light wiring through the tailgate and rear interior.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Competition Series rear bumper assembly, aluminum accent panels, tailgate-mounted license-plate bracket, plate-light components, sensor-hole plugs, and mounting hardware. Auxiliary light pods and their required wiring accessories are separate purchases. Use the guide's inventory to check the kit before beginning.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty covering defects in materials and workmanship from the purchase date. Keep your purchase record and review the manufacturer's terms for limitations and the claim process.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584855244874,"sku":"RBBR-04","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/DoOVci_g.jpg?v=1778514762"},{"product_id":"dv8-fs-15-series-rear-bumper-ford-bronco","title":"2021-2027 Ford Bronco Rear Bumper | DV8 Offroad FS-15 Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad FS-15 Bronco rear bumper, RBBR-02, fits the 2021–2026 Ford Bronco and includes Bronco Raptor applications from 2022. It retains the factory hitch and backup sensors while adding a higher-clearance rear profile, recovery mounts, and flush-mount light positions.\u003c\/p\u003e\u003cp\u003eRaptor fitment has conditions: DV8 specifies removing the rear mud flaps and using the LPBR-03 license-plate bracket because the included bracket does not fit Raptor. A 2027 application needs confirmation; the current manufacturer listing ends at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose the FS-15 when your Bronco's rear clearance is a priority. Its raised middle section and tapered wings distinguish it from a bumper chosen mainly for a broad rear face or open tube styling.\u003c\/p\u003e\u003cp\u003eIt also suits owners who want rear recovery attachments and flush-mounted lighting in the same assembly. Those features make the FS-15 a practical option to compare with the \u003ca href=\"\/products\/dv8-mto-series-rear-bumper-ford-bronco\"\u003eMTO rear bumper\u003c\/a\u003e, with the shape and license-plate arrangement helping distinguish the two.\u003c\/p\u003e\n\n\u003ch2\u003eRaised Center and Tapered Wings\u003c\/h2\u003e\n\u003cp\u003eThe bumper's center sits higher than the factory rear bumper, and its ends taper to provide room around trail obstacles. Steel plate and reinforced supports form the structure, finished in micro-texture black powder coat.\u003c\/p\u003e\u003cp\u003eThis geometry is the defining feature of the FS-15. Consider the shape around the corners and middle of your Bronco's rear end when comparing it with other bumpers, particularly if you regularly navigate ledges or uneven trail exits.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery Points and Flush-Mount Lights\u003c\/h2\u003e\n\u003cp\u003eTwo reinforced clevis mounts accept 3\/4-inch D-ring shackles. They provide designated recovery attachment points without relying on an auxiliary-light mount or another part of the bumper for that job.\u003c\/p\u003e\u003cp\u003eTwo positions accept 3-inch flush-mount LED pods. With suitable wiring, the lights can provide rear trail illumination or operate with the reverse lights. The pods, shackles, and wiring accessories are separate purchases. Choose the light's mounting style along with its size so it fits the bumper cutout.\u003c\/p\u003e\n\n\u003ch2\u003eLicense Plate, BLIS, and Raptor Requirements\u003c\/h2\u003e\n\u003cp\u003eThe supplied license-plate arrangement sits above the bumper and includes an LED plate light. Broncos equipped with Blind Spot Information System, or BLIS, require the LPBR-03 plate solution to retain that feature according to DV8.\u003c\/p\u003e\u003cp\u003eRaptor owners also need LPBR-03 because the supplied bracket does not fit that model, along with removal of the rear mud flaps. These are fitment requirements, not cosmetic recommendations. Plan the correct bracket before removing your Bronco's factory bumper.\u003c\/p\u003e\n\n\u003ch2\u003eWill a 37-Inch Spare Clear?\u003c\/h2\u003e\n\u003cp\u003eDV8 lists clearance for up to a 37-inch spare on the OEM carrier. It recommends a third brake-light extension to preserve full light visibility with that tire size.\u003c\/p\u003e\u003cp\u003eThat clearance statement concerns the space over the bumper. It does not raise the carrier or tailgate's weight capacity. Check your actual wheel-and-tire combination, carrier arrangement, plate visibility, and tailgate movement as part of the complete installation.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about 2.5 hours for installation. The bumper uses bolt-on mounts, retains the factory rear sensors, and requires plate-light wiring. The guide also describes trimming certain sensor-bezel tabs for the thicker bumper material.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-02_Install-Manual.pdf?v=10172408675947860283\"\u003eFS-15 rear bumper installation guide\u003c\/a\u003e before starting. Arrange help for lifting, identify your BLIS and Raptor requirements, and check sensor and plate-light operation after the bumper is secured.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the FS-15 bumper assembly, reinforced clevis mounts, mounting hardware, and the standard plate bracket and LED plate light. Light pods, D-ring shackles, third brake-light extension, and the LPBR-03 bracket required for BLIS-equipped or Raptor applications are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Retain your receipt and consult the full terms for coverage limits and claim instructions.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584857243722,"sku":"RBBR-02","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/wqgFkyFQ.jpg?v=1778515146"},{"product_id":"dv8-mto-series-rear-bumper-ford-bronco","title":"2021-2027 Ford Bronco Rear Bumper | DV8 Offroad MTO Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad MTO Series Bronco rear bumper, RBBR-01, fits 2021–2026 Ford Bronco models, including Bronco Raptor applications from 2022. It works with the factory hitch and backup sensors and clears up to a 37-inch spare on the OEM carrier.\u003c\/p\u003e\u003cp\u003eFor Raptor, DV8 specifies removing the rear mud flaps and using the LPBR-03 license-plate bracket instead of the included bracket. Confirm any 2027 application before ordering because the current manufacturer listing ends at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eMTO means Made to Overland. This bumper suits Bronco owners who want a plate-style rear bumper with recovery mounts, flush-mounted rear lighting, and room for a larger spare. Its side-mounted plate arrangement is an important part of that layout.\u003c\/p\u003e\u003cp\u003eCompared with the open rear tube bumper, the MTO uses a broader steel body with removable mesh accents. Compared with choosing on appearance alone, its useful buying features are the spare clearance, hitch compatibility, recovery attachments, and ability to retain the rear parking sensors.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Body with Removable Mesh Accents\u003c\/h2\u003e\n\u003cp\u003eThe MTO uses 4mm steel body panels with 5mm mounts and supports. A two-stage micro-texture black powder-coat finish covers the steel, while aluminum mesh inserts provide contrasting accent areas.\u003c\/p\u003e\u003cp\u003eThe mesh panels bolt on and can be removed for painting. That lets you personalize the accents without refinishing the complete bumper. DV8 lists an approximate bumper weight of 79 pounds, so plan assistance for positioning it and take the added equipment into account when planning your Bronco's load.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery Mounts and Rear Trail Lights\u003c\/h2\u003e\n\u003cp\u003eTwo reinforced clevis mounts accept 3\/4-inch D-ring shackles. These are designated recovery attachment locations built into the bumper layout, separate from its lighting provisions.\u003c\/p\u003e\u003cp\u003eThe bumper accepts two 3-inch flush-mount pods. Depending on the wiring arrangement, they can supplement reverse lighting or operate from a separate switch for trail use. Choose flush-mount lights that suit the cutouts and plan the harness before assembly. Lights, shackles, and wiring accessories are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eSpare Clearance and Side Plate Mount\u003c\/h2\u003e\n\u003cp\u003eThe side-mounted license plate leaves space for the tailgate and larger spare. DV8 specifies clearance for up to a 37-inch tire on the OEM carrier and recommends a third brake-light extension to maintain light visibility with that size.\u003c\/p\u003e\u003cp\u003eSpare clearance does not change the carrier's weight rating. Check your actual tire position and carrier equipment along with the plate bracket. Broncos with BLIS require LPBR-03 to retain that feature, and Raptor applications need that bracket because the supplied one does not fit.\u003c\/p\u003e\n\n\u003ch2\u003eWill My Bronco's Backup Sensors Work?\u003c\/h2\u003e\n\u003cp\u003eThe MTO accepts the factory backup sensors. For Broncos originally equipped with plastic bumpers, DV8 strongly recommends OE sensor bezels or its MPRSNSR-01 kit. Sensor-hole plugs are supplied for vehicles without parking sensors.\u003c\/p\u003e\u003cp\u003eThe guide describes trimming certain bezel tabs to fit the thicker bumper material. Identify your original sensor and bezel arrangement before starting, keep track of the sensor positions during transfer, and check operation once everything is installed.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8's product listing estimates about 2.5 hours and calls for two people to lift the bumper into place. The job includes assembly, sensor transfer, the license-plate bracket, and plate-light wiring. Allow additional time for rear pod lights and any required bracket changes.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/RBBR-01_InstallManual.pdf?v=17674791615308048511\"\u003eMTO rear bumper installation guide\u003c\/a\u003e before beginning. Its cover mentions minor welding, while the product listing describes a direct fit; confirm that discrepancy with DV8 before scheduling an installation that must be completely welding-free.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the MTO rear bumper assembly, removable mesh accents, reinforced clevis mounts, sensor-hole plugs, mounting hardware, and the standard license-plate bracket with plate lights. Auxiliary pods, shackles, sensor-bezel accessories, third brake-light extension, and LPBR-03 bracket are separate purchases when required.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 supplies a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Keep your purchase record and review the complete terms for coverage limitations and claim requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584865206346,"sku":"RBBR-01","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/mFynY0Rw.jpg?v=1778515710"},{"product_id":"dv8-offroad-oe-plus-series-front-bumper-v2-ford-bronco","title":"2021-2027 Ford Bronco Front Bumper V2 | DV8 Offroad OE Plus Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad OE Plus V2 Bronco front bumper, FBBR-06, is listed for the 2021–2026 Ford Bronco. It follows the factory body lines and works with the original skid plate, front camera, and parking sensors. Factory fog lights do not fit this replacement bumper.\u003c\/p\u003e\u003cp\u003eDV8's fitment table says “All Models” but does not separately identify Raptor in this listing. Confirm a Bronco Raptor application before ordering. A 2027 application also needs confirmation because the current manufacturer listing ends at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose the OE Plus V2 if you want a steel front bumper that stays close to your Bronco's factory shape and preserves an ACC-friendly layout. It is a useful option when the priorities are lighting mounts, recovery attachments, and keeping the factory skid instead of adding an integrated winch.\u003c\/p\u003e\u003cp\u003eThe important difference from the original OE Plus is the V2's provision for the adaptive cruise control module. You can retain it in the bumper with the appropriate light-bar arrangement rather than automatically buying a relocation bracket.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Retain ACC?\u003c\/h2\u003e\n\u003cp\u003eThe V2 integrates space for your Bronco's adaptive cruise control module. Light-bar selection determines whether the module can remain there.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith ACC in the bumper:\u003c\/strong\u003e Use a 20-inch single-row bar behind the mesh above the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithout ACC:\u003c\/strong\u003e A 20-inch dual-row bar can sit in the bumper opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith ACC and a dual-row bar:\u003c\/strong\u003e Relocate the module using the separately sold ACC relocation bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDecide on the light and ACC configuration together. The bumper's ability to retain ACC does not mean every light-bar arrangement clears the module.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Other Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eEach wing has mounting positions for two 3-inch pods, giving your Bronco four side pod positions in total. These sit apart from the center light-bar opening, so you can select lighting for the front and sides of the vehicle.\u003c\/p\u003e\u003cp\u003eAuxiliary lights are separate purchases. Check the actual mounting dimensions of the chosen lights and allow for brackets and wiring. The factory fog lights are not reused, so plan aftermarket lighting if that function matters to your build.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Construction and Recovery Mounts\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses 3.5mm and 5mm plate steel with a micro-texture black powder-coat finish. Its low-profile shape keeps the assembly close to the Bronco's body lines. Paintable mesh accent panels let you change the insert color without repainting the complete bumper.\u003c\/p\u003e\u003cp\u003eTwo integrated 1-inch-thick D-ring mounts accept 3\/4-inch shackles. Welded-in zip-tie tabs provide attachment points for light wiring. The recovery mounts and wiring tabs serve separate jobs; secure recovery equipment only to the designated attachments.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Stays?\u003c\/h2\u003e\n\u003cp\u003eThe original front skid plate, camera, and parking sensors remain compatible. DV8 lists no front-camera obstruction from this bumper. Plugs are included for Broncos without front parking sensors, so unused openings can be filled.\u003c\/p\u003e\u003cp\u003eThis is a significant buying distinction from bumpers that replace the skid or require camera relocation. Check what is actually installed on your Bronco, especially if an earlier owner has changed the skid, sensors, or front lighting.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about 2.5 hours for the bolt-on installation. Arrange assistance for removing and positioning the bumpers, and allow time for transferring sensors and fitting your lighting configuration.\u003c\/p\u003e\u003cp\u003eThe \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-06_Install_Guide_Final_v2.pdf?v=5133255675176038864\"\u003eOE Plus V2 installation guide\u003c\/a\u003e explains the ACC cover and light-bar mounting differences. Read it before selecting a center light, then check the supplied hardware against the inventory before taking the factory bumper off.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the OE Plus V2 bumper assembly, accent panels, integrated D-ring mounts, sensor-hole plugs, and mounting hardware. Lights, shackles, and any ACC relocation equipment required by your chosen light configuration are separate purchases. Your factory skid plate is reused rather than supplied as a new part.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 supplies a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Retain your receipt and review the full warranty terms for limitations, exclusions, and the claim process.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584895746122,"sku":"FBBR-06","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-06-oe-plus-v2-bumper-side-profile-product-shot.jpg?v=1788231428"},{"product_id":"dv8-spec-series-winch-front-bumper-ford-bronco-raptor","title":"2022-2027 Ford Bronco Raptor Winch Front Bumper | DV8 Offroad Spec Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Spec Series Bronco Raptor winch front bumper, FBFR-01, fits 2022–2026 Ford Bronco Raptor four-door models. It is specific to Raptor and replaces the factory bumper and skid plate. The original fog lights and skid plate do not transfer to this assembly.\u003c\/p\u003e\u003cp\u003eFor a standard Bronco, use the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco\"\u003eFBBR-05 Spec Series bumper\u003c\/a\u003e. DV8's current Raptor listing ends at 2026, so confirm a 2027 application before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose this bumper if your Bronco Raptor build needs an integrated winch mount, dedicated recovery attachments, skid protection, and several light positions. It combines those functions in a plate-and-tube assembly shaped to follow the Raptor's front end.\u003c\/p\u003e\u003cp\u003eCompared with the \u003ca href=\"\/products\/dv8-tube-series-front-bumper-ford-bronco-raptor\"\u003eRaptor Tube Series bumper\u003c\/a\u003e, the Spec Series puts winch mounting at the center of the design. It is the more relevant option to compare when adding a winch is a requirement rather than a possible future accessory.\u003c\/p\u003e\n\n\u003ch2\u003eWinch Mount and D-Ring Attachments\u003c\/h2\u003e\n\u003cp\u003eThe bumper accommodates various winch sizes. Confirm the dimensions and mounting requirements of your specific winch before ordering so you can plan access to its controls and line routing. The bumper does not include a winch simply because it provides the mount.\u003c\/p\u003e\u003cp\u003eTwo 1-inch-thick D-ring mounts accept 3\/4-inch shackles. The tubular bull bar adds light brush and debris protection around the winch and grille, while also serving as an auxiliary-light mount. Use the designated recovery attachments for recovery gear.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Bumper with Replacement Skid\u003c\/h2\u003e\n\u003cp\u003eThe assembly combines steel plate and steel tube with a micro-texture black powder-coat finish. A heavy-duty steel skid replaces your Bronco Raptor's factory skid, giving the bumper a matching lower protective section.\u003c\/p\u003e\u003cp\u003eDV8 lists a standard accent panel and an optional red-R accent treatment. Check the selected package if that appearance matters to your build. Welded-in zip-tie tabs provide places to organize wiring for the lights and winch instead of leaving harnesses loose behind the bumper face.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eThe light-bar mounts have specific compatibility requirements. Use the listed models rather than assuming any bar with the same nominal length will fit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBehind the center mesh:\u003c\/strong\u003e Baja Designs S8 20-inch, Rigid SR 20-inch, or DV8 Elite 20-inch Single Row.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBull bar:\u003c\/strong\u003e Baja Designs S8 10-inch, Rigid SR Series 10-inch, or DV8 Elite 13-inch Single Row.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWings:\u003c\/strong\u003e Up to four 3-inch pods, two per side.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAuxiliary lights and their wiring are separate purchases. Choose the complete light layout before assembling the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eCamera and ACC Relocation Requirements\u003c\/h2\u003e\n\u003cp\u003eThe bumper retains factory parking sensors, but it obstructs the front camera. Plan a compatible camera-relocation solution if you want to restore an unobstructed view from that camera.\u003c\/p\u003e\u003cp\u003eDV8 specifies the ABBR-01 relocation mount for retaining adaptive cruise control. The manufacturer's product information does not establish that this bracket comes in the bumper package, so plan it as a separate accessory and verify your order contents. Parking-sensor compatibility does not mean all front electronics remain in their original positions.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about four hours for installation and requires assistance for bumper removal and positioning. The main bumper installation is bolt-on, with no cutting or drilling specified. Accessories and electronics relocation can add time.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBFR-01_Install_Guide_Final.pdf?v=7985255945467945863\"\u003eRaptor Spec Series installation guide\u003c\/a\u003e before starting. Confirm your hardware inventory and arrange the winch, lights, and required relocation parts so the complete setup can be assembled in a planned sequence.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Raptor Spec Series bumper assembly, bull bar, replacement skid plate, D-ring mounts, and mounting hardware. Check the selected accent-panel configuration when ordering. The winch, shackles, lighting, and electronics relocation accessories should be planned separately.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Keep your receipt and review the complete warranty terms for limitations, exclusions, and claim instructions.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584938442826,"sku":"FBFR-01","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbfr-01-spec-series-bumper-bull-bar-side-profile.jpg?v=1788231382"},{"product_id":"dv8-spec-series-winch-front-bumper-ford-bronco","title":"2021-2027 Ford Bronco Winch Front Bumper | DV8 Offroad Spec Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Spec Series Bronco front bumper adds a recessed winch mount, steel skid plate, and several auxiliary-light mounting positions. Manufacturer part number FBBR-05 fits 2021–2026 Ford Bronco two-door and four-door models, excluding Bronco Raptor. It replaces the factory front bumper on the full-size Bronco; it does not fit Bronco Sport.\u003c\/p\u003e\n\u003cp\u003eFor Raptor models, see the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco-raptor\"\u003eRaptor Spec Series front bumper\u003c\/a\u003e. Fitment for a 2027 Bronco needs confirmation before ordering because DV8's current listing stops at 2026.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis Bronco winch bumper suits owners planning a trail build who also want skid protection and room for added lighting. Its low-profile shape is designed around front-end clearance for rock crawling. The recessed winch position keeps part of the winch within the bumper, while the tubular bull bar adds light brush protection around the winch and grille.\u003c\/p\u003e\n\u003cp\u003eFor your Bronco, the main benefit is the combination of features: winch mounting, a replacement skid plate, and light mounts in the center, wings, and bull bar. Consider which of those you will use when comparing it with a simpler bumper.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does the Winch Mount Work?\u003c\/h2\u003e\n\u003cp\u003eThe recessed mount accommodates multiple winch sizes. Check your winch's dimensions and mounting requirements before ordering so the housing, controls, and line routing work with the bumper. A winch-ready bumper still needs a compatible winch and fairlead purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoller fairleads do not fit this bumper.\u003c\/strong\u003e For a steel-cable winch, DV8 recommends an iron or steel hawse fairlead. Select the fairlead for both the bumper opening and your winch line rather than transferring an existing roller setup.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Construction and Skid Protection\u003c\/h2\u003e\n\u003cp\u003eThe bumper combines steel plate and tubular steel with a micro-texture black powder-coat finish. A satin black mesh accent plate sits at the center. The textured bumper and contrasting mesh give the assembly a consistent finish around its lighting openings.\u003c\/p\u003e\n\u003cp\u003eThe included heavy-duty steel skid plate replaces your Bronco's stock skid and adds protection beneath the bumper. Welded-in zip-tie tabs give you places to secure accessory wiring. Plan your wire routing before installation so the harnesses stay clear of sharp edges and moving components.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eThere are three mounting areas, each with its own light requirements. Choose lights for the specific location rather than using bar length alone to judge fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBull bar:\u003c\/strong\u003e Baja Designs S8 10-inch, Rigid SR 10-inch, or DV8 Elite 13-inch Single Row. The Elite 13-inch requires slide bracket BESLDBKTLG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bumper mount:\u003c\/strong\u003e Baja Designs S8 20-inch, Rigid SR 20-inch, or DV8 Elite 20-inch Single Row.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBumper wings:\u003c\/strong\u003e Two 3-inch light pods on each side, for four total.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe separate positions let you build your Bronco's trail-lighting layout around your driving needs. Auxiliary lights are sold separately, so include the lights and any required brackets in your installation plan.\u003c\/p\u003e\n\n\u003ch2\u003eWill My Bronco's Factory Sensors Still Work?\u003c\/h2\u003e\n\u003cp\u003eThis front bumper retains your Bronco's factory parking sensors, and sensor-hole plugs are included for Broncos without them. Camera and adaptive cruise control equipment need separate attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptive cruise control requires the separately sold ABBR-01 relocation mount.\u003c\/strong\u003e The bumper also obstructs the factory front camera. If your Bronco has a front camera, plan a compatible relocation solution to retain an unobstructed view. Check these requirements before fitting a winch or lights so the complete setup works together.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThis Ford Bronco front bumper uses a bolt-on mounting arrangement. DV8 estimates roughly four hours for installation and calls for assistance when removing and installing the bumpers. Additional accessories and electronics relocation can add time to the job.\u003c\/p\u003e\n\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-05_Install_Guide.pdf?v=15941897564715404463\"\u003eFBBR-05 installation guide\u003c\/a\u003e before starting. Check the hardware inventory, gather the listed tools, and decide when to install your winch and lighting. Have another person ready to help position the assembly while you align and start the mounting hardware.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Spec Series front bumper, tubular bull bar, replacement steel skid plate, mounting hardware, and sensor-hole plugs. Refer to the installation guide for the detailed hardware inventory.\u003c\/p\u003e\n\u003cp\u003eThe winch, fairlead, auxiliary lights, and ACC relocation mount are separate purchases. Check the accessories in installed photos against this list when planning your build and budget.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 Offroad provides a one-year limited manufacturer warranty from the purchase date for defects in materials and workmanship. Coverage is subject to the manufacturer's warranty terms. Keep your purchase record and review those terms for the claim process, limitations, and exclusions.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43642489831498,"sku":"FBBR-05","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-05-spec-series-bumper-bull-bar-product-shot.jpg?v=1788231317"},{"product_id":"dv8-competition-series-front-bumper-ford-bronco","title":"2021-2027 Ford Bronco Front Bumper | DV8 Offroad Competition Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Competition Series Bronco front bumper, FBBR-04, fits 2021–2026 Ford Bronco models, excluding Raptor. It replaces the factory bumper and skid with a low-profile tube-and-plate assembly and a supplied steel skid. Factory fog lights do not transfer.\u003c\/p\u003e\u003cp\u003eDV8 currently lists this bumper through 2026; a 2027 Bronco application needs confirmation. Owners starting with the factory plastic bumper also need to account for cutting the original skid-plate\/D-ring mounts during installation.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose the Competition Series if front-end clearance is a higher priority than an integrated winch mount. DV8 describes it as its lowest-profile Bronco bumper, with a desert-racing-inspired shape intended to help the front end clear obstacles.\u003c\/p\u003e\u003cp\u003eThis is a different approach from the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco\"\u003eSpec Series winch bumper\u003c\/a\u003e. The Competition focuses on a compact bumper-and-skid layout; the Spec provides a built-in winch mount. Choose according to how you plan to use your Bronco rather than appearance alone.\u003c\/p\u003e\n\n\u003ch2\u003eLow Profile with Extended Skid Protection\u003c\/h2\u003e\n\u003cp\u003eThe supplied steel skid replaces the factory plastic or metal skid. Bolt-on side gussets add coverage around the engine area, and the bumper-and-skid combination is shaped to improve approach clearance over the stock arrangement.\u003c\/p\u003e\u003cp\u003eSteel tube and plate construction creates the main structure, while a paintable aluminum mesh panel sits at the center. DV8 lists an approximate weight of 59 pounds. The mesh provides an opening for airflow to the intercooler while giving you an accent panel you can finish to match your build.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eInset mounting positions accept two 3-inch LED pods and a 20-inch dual-row LED light bar. This gives your Bronco a central lighting option plus a pod position toward either side.\u003c\/p\u003e\u003cp\u003eThe mounts are included provisions, not supplied lamps. Check your chosen light's bracket dimensions and plan its wiring before fitting the bumper. A light labeled 20 inches still needs compatible mounting geometry and adequate clearance behind the opening.\u003c\/p\u003e\n\n\u003ch2\u003eWill My Bronco's Sensors Still Work?\u003c\/h2\u003e\n\u003cp\u003eThe bumper provides mounting locations for the factory front parking sensors. Plugs are supplied for Broncos without the feature, so those openings can be filled. Adaptive cruise control requires the separately sold ABBR-01 relocation bracket to retain operation.\u003c\/p\u003e\u003cp\u003eCheck your Bronco's equipment before ordering accessories. Parking-sensor retention and ACC relocation are separate subjects, and the factory fog lamps do not fit the new bumper. Plan replacement trail lighting independently of the original fog-light installation.\u003c\/p\u003e\n\n\u003ch2\u003eDoes Installation Require Cutting?\u003c\/h2\u003e\n\u003cp\u003eOn Broncos originally equipped with the plastic front bumper, DV8 specifies trimming the skid-plate mount\/D-ring portions flush to accept the new skid. The installation guide lists a cutoff tool for that application. This should not be presented as a modification-free install for every Bronco.\u003c\/p\u003e\u003cp\u003eUse the instructions for your original bumper configuration. Review the cutting requirement before dismantling the vehicle, particularly if you want to understand what would be involved in returning to the factory setup later.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates roughly three hours for installation, with assistance useful for positioning the assembly. The process includes bumper assembly, sensor transfer, skid installation, and wiring for any lights you add. ACC relocation can add work.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-04_Instal_Guide_V2_-_FINAL.pdf?v=1362891740855986901\"\u003eCompetition front bumper installation guide\u003c\/a\u003e before starting. Follow its hardware and alignment sequence so the replacement skid and side gussets are positioned as intended.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Competition Series front bumper assembly, replacement steel skid plate, bolt-on side gussets, center accent panel, sensor-hole plugs, and installation hardware. Lights, wiring accessories, and the required ACC relocation bracket for equipped Broncos are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 provides a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Coverage follows the manufacturer's terms; retain your receipt and review the limitations and claim requirements.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43584964526154,"sku":"FBBR-04","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-04-competition-bumper-side-profile-product-shot.jpg?v=1788231278"},{"product_id":"dv8-oe-plus-series-front-bumper-ford-bronco","title":"2021-2027 Ford Bronco Front Bumper | DV8 Offroad OE Plus Series","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad OE Plus Bronco front bumper, FBBR-03, fits 2021–2026 Ford Bronco two-door and four-door models, excluding Raptor. It works with the factory plastic or metal skid plate and retains the front parking sensors. Factory fog lights do not transfer.\u003c\/p\u003e\u003cp\u003eDV8's current listing stops at 2026, so confirm compatibility for a 2027 Bronco before ordering. This is the original OE Plus bumper, distinct from the FBBR-06 V2 with its different adaptive cruise control arrangement.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis bumper suits Bronco owners who want a steel replacement that stays close to the factory body lines. It adds dedicated recovery attachments and lighting mounts while allowing you to reuse the original skid plate.\u003c\/p\u003e\u003cp\u003eIt is not winch-compatible. That helps explain its slim layout and makes it a different choice from the \u003ca href=\"\/products\/dv8-spec-series-winch-front-bumper-ford-bronco\"\u003eSpec Series winch bumper\u003c\/a\u003e. If a winch is central to your build, select a bumper designed to mount one rather than treating this as a winch platform.\u003c\/p\u003e\n\n\u003ch2\u003eFactory Styling with Three-Piece Construction\u003c\/h2\u003e\n\u003cp\u003eThe original OE Plus uses a three-piece assembly with steel body panels, steel mounts and supports, and a micro-texture black powder-coat finish. The center cutaway pattern follows the grille styling used on Badlands, Wildtrak, and First Edition Broncos.\u003c\/p\u003e\u003cp\u003eThe shape keeps the bumper close to your Bronco's front end rather than projecting a large winch cradle ahead of it. This makes the OE Plus worth considering when the factory-style appearance is as important to you as the added lighting and recovery provisions.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eA center mounting position accepts a 20-inch dual-row light bar behind the grille-pattern cutaways. The cutaways allow light through while placing the bar behind the bumper face. Two 3-inch pod positions sit on each side, for four pods total.\u003c\/p\u003e\u003cp\u003eLights are sold separately. Match their brackets and mounting dimensions to the bumper before choosing a harness. Because the factory fog lights do not fit, decide which aftermarket lights you want as part of the bumper installation rather than assuming the original lamps will carry over.\u003c\/p\u003e\n\n\u003ch2\u003eCamera, Sensors, and ACC Compatibility\u003c\/h2\u003e\n\u003cp\u003eYour Bronco's factory parking sensors transfer to the new bumper. Sensor-hole plugs are provided for vehicles without those sensors. The bumper is compatible with the factory camera system, although DV8 notes that part of the bumper is visible in the front-camera image.\u003c\/p\u003e\u003cp\u003eAdaptive cruise control requires relocating the module with the appropriate bracket, sold separately. This is an important difference from the OE Plus V2, which can retain ACC in the bumper with a suitable single-row lighting arrangement. Choose between the versions with your Bronco's equipment in mind.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery Mounts and Factory Skid Fit\u003c\/h2\u003e\n\u003cp\u003eReinforced clevis mounts accept 3\/4-inch D-ring shackles, adding designated front recovery attachment points. Shackles and other recovery equipment are separate from the bumper's mounting provisions.\u003c\/p\u003e\u003cp\u003eThe bumper clears both original plastic and metal front skid plates. You can keep that part of your existing setup rather than automatically purchasing another skid. If your Bronco has an aftermarket skid, check that specific combination instead of assuming the factory-skid statement covers it.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eDV8 estimates about 1.5 hours for the bumper installation and calls for help lifting the assembly into place. Additional light wiring or ACC relocation can increase the time required for your Bronco.\u003c\/p\u003e\u003cp\u003eReview the \u003ca href=\"https:\/\/dv8offroad.com\/cdn\/shop\/files\/FBBR-03_Install_Guide_V3.pdf?v=13087485309056994619\"\u003eoriginal OE Plus installation guide\u003c\/a\u003e before starting. Confirm your sensor positions and hardware inventory, and arrange any relocation equipment before removing the original bumper. The guide is specific to FBBR-03, so use it rather than the V2 instructions.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the three-piece OE Plus bumper assembly, reinforced recovery mounts, sensor-hole plugs, and mounting hardware. Auxiliary lights, shackles, wiring accessories, and the ACC relocation bracket are separate purchases. The factory skid plate is reused, not included as a new replacement.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eDV8 backs this bumper with a one-year limited manufacturer warranty for defects in materials and workmanship from the purchase date. Keep your receipt and consult the full terms for coverage limits and the claim process.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":43585009811530,"sku":"FBBR-03","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fbbr-03-oe-plus-bumper-side-profile-product-shot.jpg?v=1788231234"},{"product_id":"ford-bronco-hyperlyte-front-bumper-skid-plate-turn-offroad","title":"2021-2027 Ford Bronco Hyperlyte Front Bumper | Turn Offroad","description":"\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis front bumper is built by Turn Offroad for the 2021 Ford Bronco through the 2027 Ford Bronco, both 2-door and 4-door. It fits every trim except the Bronco Raptor. It's a bolt-on part with no cutting or drilling into the frame. It does not fit the Ford Bronco Sport, since that model uses a different frame and mounting points entirely.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eBronco owners who want steel protection without adding as much front-end weight, plus an integrated skid plate and room for a 30-inch light bar.\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe bumper is built from 3mm steel and finished in a micro-texture black powder coat that matches the rest of Turn Offroad's Bronco lineup. It weighs under 50 pounds, which is lighter than the factory modular steel bumper it replaces, so the front end doesn't pick up the nose-heavy feel that a lot of steel upgrades add. Turn Offroad vented sections of the bumper face to cut weight while still routing air to the intercooler, so engine cooling doesn't take a hit even with the lighter build. The approach angle opens up compared to the factory bumper, giving more room to clear rocks and ledges on the way up a trail.\u003c\/p\u003e\n\u003ch2\u003eProtection\u003c\/h2\u003e\n\u003cp\u003eA full skid plate is built into the bumper's structure rather than bolted on as a separate piece afterward. That keeps rocks, stumps, and trail debris on the approach from reaching the radiator support or steering components underneath the front end. Because the skid plate is part of the same structure, there's one less seam for debris to catch on compared to a bumper and skid plate sold as two separate parts.\u003c\/p\u003e\n\u003ch2\u003eLighting Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe front face is designed around a 30-inch LED light bar, so there's no separate mount to buy or fabricate. Some product photos show amber side marker lights alongside the light bar, but those aren't part of the bumper and aren't included in the box; they'd need to be sourced and mounted separately if wanted.\u003c\/p\u003e\n\u003ch2\u003eElectronics\u003c\/h2\u003e\n\u003cp\u003eThis bumper keeps every factory sensor working the way Ford built it. The one exception is Adaptive Cruise Control: Broncos equipped with it need the separate FB1-AC1 relocation kit, sold on its own, to keep the feature functioning correctly after the bumper goes on.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is a straightforward bolt-on job with no frame modification, drilling, or cutting required. The factory mounting points line up with the new bumper, so a shop or a confident driveway install both work. Bronco Forge stocks this Turn Offroad front bumper for 2021, 2022, 2023, 2024, 2025, 2026, and 2027 Ford Bronco owners who want steel protection and a factory-style approach angle without adding the extra weight most steel bumpers carry.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default Title","offer_id":43779366748234,"sku":"FB3-M1","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fb3-m1-hyperlyte-bumper-close-up-front-three-quarter.jpg?v=1788231195"},{"product_id":"ford-bronco-baja-front-bumper-skid-plate-turn-offroad","title":"2021-2027 Ford Bronco Baja Front Bumper \u0026 Skid Plate | Turn Offroad","description":"\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis front bumper is built by Turn Offroad for the 2021 Ford Bronco through the 2027 Ford Bronco, both 2-door and 4-door. It fits every trim except the Bronco Raptor. It's a bolt-on part with no cutting or drilling into the frame. It does not fit the Ford Bronco Sport, since that model runs a different frame and mounting layout.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eBronco owners who want a compact bumper with built-in skid protection and several cube-light mounting positions without a full winch-bumper layout.\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eTurn Offroad designed this bumper to sit tight against the body instead of hanging off the front end the way a lot of aftermarket bumpers do, keeping the factory's original lines mostly intact while still adding steel protection. It's built from a tubular and plated steel structure that adds rigidity without piling on excess weight, and it bolts on using the same mounting points as the factory bumper. The finish is a durable black powder coat that holds up to trail use and daily driving alike.\u003c\/p\u003e\n\u003ch2\u003eProtection\u003c\/h2\u003e\n\u003cp\u003eA skid plate is included with the bumper rather than sold as a separate add-on, so front-end protection is covered the day it arrives instead of requiring a second purchase. The plated steel construction is built to handle rock contact, stumps, and trail debris on the approach without denting or bending the way thinner sheet metal would under the same impact.\u003c\/p\u003e\n\u003ch2\u003eLighting Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe vents on the front face are removable and can be color matched to the rest of the vehicle, so the look can be dialed in beyond the standard black finish if wanted. The bumper's center section accommodates up to six 3-inch LED cube lights, giving plenty of room to add lighting without needing a separate light bar mount bolted on top.\u003c\/p\u003e\n\u003ch2\u003eElectronics\u003c\/h2\u003e\n\u003cp\u003eThis bumper keeps the factory parking sensors working correctly after install. Broncos equipped with Adaptive Cruise Control need a separate ACC relocation bracket, sold on its own, to keep that feature functioning as it should once the new bumper is on.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is a bolt-on job with no frame cutting or drilling required, and the factory mounting points carry over directly. Bronco Forge stocks this Turn Offroad front bumper for 2021, 2022, 2023, 2024, 2025, 2026, and 2027 Ford Bronco owners who want a form-fitting steel bumper with room to run cube lights up front without changing the truck's factory stance.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default Title","offer_id":43779366781002,"sku":"FB2-M1","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fb2-m1-baja-bumper-close-up-front-three-quarter.jpg?v=1788231168"},{"product_id":"ford-bronco-winch-front-bumper-package-turn-offroad","title":"2021-2027 Ford Bronco Winch Front Bumper Package | Turn Offroad","description":"\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis front bumper package is built by Turn Offroad for the 2021 Ford Bronco through the 2027 Ford Bronco, both 2-door and 4-door. It fits every trim except the Bronco Raptor. It's a bolt-on part with no cutting or drilling into the frame.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eUnlike Turn Offroad's other bumpers, this one ships as a complete package rather than a standalone bumper. The box includes the front bumper, a skid plate, a winch mount, and a bull bar, so the front end is fully built out in one purchase instead of piecing together separate parts.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eBronco owners who want the bumper, skid plate, winch mount, and bull bar as one coordinated package instead of piecing the front end together separately.\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eEvery piece in the package uses the same three-stage protective micro-textured powder coat, dipped in an industrial primer before coating to protect the steel underneath. The bumper structure itself is built from 3\/16 and 1\/4-inch steel, giving it the mass to handle repeated rock and trail contact without denting or flexing.\u003c\/p\u003e\n\u003ch2\u003eProtection\u003c\/h2\u003e\n\u003cp\u003eThe skid plate mounts underneath to protect the front end's vital components from rocks, stumps, and trail debris on the approach. The bull bar bolts onto the front of the bumper with no drilling or modification required, adding another layer of protection along with a more aggressive front profile.\u003c\/p\u003e\n\u003ch2\u003eRecovery\u003c\/h2\u003e\n\u003cp\u003eSteel recovery shackle mounts rated for 3\/4-inch shackles are built into the bumper structure. Paired with the included winch mount, the setup accommodates winches up to 12,500 pounds using a standard 10 by 4.5-inch foot mounting pattern, so most common winch sizes bolt straight on without an adapter plate.\u003c\/p\u003e\n\u003ch2\u003eElectronics\u003c\/h2\u003e\n\u003cp\u003eThis package keeps factory sensors working after install. Some Broncos need a separate ACC relocation bracket and front camera relocation kit, both sold on their own, to keep those specific features functioning correctly; the bull bar itself is designed to work with both relocation kits without interference.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is a bolt-on job with no frame cutting or drilling required. This package is backed by a lifetime warranty. Bronco Forge stocks this Turn Offroad front bumper package for 2021, 2022, 2023, 2024, 2025, 2026, and 2027 Ford Bronco owners who want a complete, winch-ready front end without buying the bumper, skid plate, winch mount, and bull bar as four separate parts.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default Title","offer_id":43779366813770,"sku":"FB1-M1P","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/fb1-m1p-winch-bumper-close-up-front-three-quarter.jpg?v=1788231144"},{"product_id":"ford-bronco-swing-out-tire-carrier-rear-bumper-turn-offroad","title":"2021-2027 Ford Bronco Tire Carrier Rear Bumper | Turn Offroad","description":"\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis rear bumper is built for the 2021-2027 Ford Bronco. Check the fitment notes below for trim-specific requirements.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eBronco owners running a heavier spare who want the tire weight carried by the bumper instead of the factory tailgate hinges.\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe swing-out carrier moves the spare tire load off the tailgate and onto the bumper structure. Race-grade heim joints connect the carrier to the tailgate so the assembly opens together.\u003c\/p\u003e\n\u003ch2\u003eLighting \u0026amp; Factory Features\u003c\/h2\u003e\n\u003cp\u003eIntegrated lighting and a third brake light are included. Factory cameras, sensors, and the factory tow hitch remain compatible.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is bolt-on with no frame cutting or drilling required.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default Title","offer_id":43826774573130,"sku":"RB4-M1","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-swing-out-tire-carrier-with-lights-5116095.jpg?v=1784643314"},{"product_id":"ford-bronco-hyperlyte-rear-bumper-turn-offroad","title":"2021-2027 Ford Bronco Hyperlyte Rear Bumper | Turn Offroad","description":"\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis rear bumper is built for the 2021-2027 Ford Bronco. Check the fitment notes below for trim-specific requirements.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eBronco owners who want better rear clearance and built-in lighting without adding a heavy steel bumper to the back of the truck.\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eBuilt from 3mm steel, the Hyperlyte weighs under 45 pounds and sits high for a better departure angle than the factory bumper.\u003c\/p\u003e\n\u003ch2\u003eLighting\u003c\/h2\u003e\n\u003cp\u003eTwo 3-inch cube lights are integrated into the bumper for rear trail and reverse lighting.\u003c\/p\u003e\n\u003ch2\u003eFactory Features\u003c\/h2\u003e\n\u003cp\u003eFactory sensors and the factory tow hitch remain compatible.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is bolt-on with no frame cutting or drilling required.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default Title","offer_id":43826779783242,"sku":"RB3-M1","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-hyperlyte-rear-bumper-7519022.jpg?v=1784643444"},{"product_id":"ford-bronco-zero-series-rear-bumper-turn-offroad","title":"2021-2027 Ford Bronco Zero Series Rear Bumper | Turn Offroad","description":"\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis rear bumper is built for the 2021-2027 Ford Bronco. Check the fitment notes below for trim-specific requirements.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eBronco owners who want a high-clearance rear bumper with strong frame mounting, built-in recovery points, rear lighting, and a relocated license plate.\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe Zero Series sits high and tight to the body and mounts to the frame at six points. It uses 3\/16- and 1\/4-inch steel with a three-stage textured powder-coat finish.\u003c\/p\u003e\n\u003ch2\u003eRecovery \u0026amp; Lighting\u003c\/h2\u003e\n\u003cp\u003eBuilt-in shackle mounts accept 3\/4-inch shackles. Two 3-inch flush-mount LED lights are integrated into the bumper.\u003c\/p\u003e\n\u003ch2\u003eFactory Features\u003c\/h2\u003e\n\u003cp\u003eFactory sensors remain functional. The license plate relocates higher to keep it away from trail obstacles.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is bolt-on with no frame cutting or drilling required.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default","offer_id":43826843418698,"sku":"RB1-M1","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-rear-bumper-zero-series-4755627.jpg?v=1784646167"},{"product_id":"ford-bronco-baja-tubular-rear-bumper-turn-offroad","title":"2021-2027 Ford Bronco Baja Tubular Rear Bumper | Turn Offroad","description":"\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThis rear bumper is built for the 2021-2027 Ford Bronco. Check the fitment notes below for trim-specific requirements.\u003c\/p\u003e\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eBronco owners who want a tucked-up tubular rear bumper that improves departure clearance while keeping the factory sensors and tow package.\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe Baja Tubular uses a tubular and plated steel layout that tucks high against the body for more rear clearance and a tighter look than the factory bumper.\u003c\/p\u003e\n\u003ch2\u003eProtection\u003c\/h2\u003e\n\u003cp\u003eThe raised profile improves departure clearance without adding the width of a large wraparound bumper.\u003c\/p\u003e\n\u003ch2\u003eFactory Features\u003c\/h2\u003e\n\u003cp\u003eFactory backup sensors and the factory tow package remain compatible.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is bolt-on with no frame cutting or drilling required.\u003c\/p\u003e","brand":"Turn Offroad","offers":[{"title":"Default","offer_id":43826846859338,"sku":"RB2-M1","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/2021-ford-bronco-baja-tubular-rear-bumper-4682502.jpg?v=1784646302"},{"product_id":"ford-bronco-krawler-front-bumper-addictive-desert-designs","title":"2021-2027 Ford Bronco Krawler Front Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Krawler Ford Bronco front bumper, part number F230311070102, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis Bronco winch bumper is for a build centered on technical trails, recessed recovery equipment, and round auxiliary lights. The angular bull bar is included in the design, so it is worth comparing with bumpers whose upper light hoop is a separate purchase.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe steel bumper uses high-clearance angles with hammer black powder coat and satin black aluminum accents. A louvered lower panel is part of the bumper layout. That panel and a full underbody skid are different components; check the coverage you want beneath your Bronco.\u003c\/p\u003e\n\n\u003ch2\u003eWinch Mount Behind the Bull Bar\u003c\/h2\u003e\n\u003cp\u003eThe winch mount sits behind the bull bar, with reinforced clevis mounts for 3\/4-inch D-ring shackles. Select your winch by its mounting pattern, body dimensions, and control access. A winch mount does not include the winch, fairlead, shackles, or other recovery equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eTwo positions in the bumper accept 3–4-inch round lights. Two more mounts on top of the wings accept rounds up to 6 inches, and the bull bar adds three positions for rounds up to 6 inches. Choose the positions and beam patterns you need before ordering the lights.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Does This Bumper Retain?\u003c\/h2\u003e\n\u003cp\u003eFactory parking sensors are retained. Adaptive cruise control requires ADD's separate relocation bracket on equipped Broncos. Reusing the factory plastic skid requires modification for clearance. ADD offers a separate 3\/16-inch aluminum skid, so include that part in your plan if you want the matching replacement.\u003c\/p\u003e\n\n\u003ch2\u003ePlanning the Complete Winch Setup\u003c\/h2\u003e\n\u003cp\u003eChoose the winch, fairlead, and line as a compatible system before assembling the bumper. Confirm access to the controls and the route for power cables, along with clearance for your chosen lights. A bumper's winch provision is not confirmation that every winch housing will fit. Recovery mounts also need compatible hardware; the bumper purchase alone does not supply a complete recovery system. Check the selected winch and recovery equipment instructions alongside the bumper guide.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 4 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021-Bronco-Krawler-Front-InstallGuide.pdf?v=1714930555729732673\"\u003eKrawler front bumper installation guide\u003c\/a\u003e before starting. Match it to SKU F230311070102, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe Krawler bumper includes its angular bull bar, winch-mount provision, lighting mounts, and recovery attachment points. The matching full aluminum skid is optional. Lights, winch equipment, and the ACC relocation bracket are separate purchases; verify the hardware inventory in the installation guide.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43830215737418,"sku":"F230311070102","price":2298.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/f230311070102-krawler-bumper-close-up-front-three-quarter.jpg?v=1788231120"},{"product_id":"ford-bronco-pro-bolt-on-front-bumper-addictive-desert-designs","title":"2021-2026 Ford Bronco Front Bumper | Addictive Desert Designs PRO Bolt-On","description":"\u003cp\u003eThe Addictive Desert Designs PRO Bolt-On is a low-profile Ford Bronco front bumper with an included vented aluminum skid plate and flexible auxiliary-light mounts. It follows the front body lines closely and installs without frame cutting. Designed for the 2021-2026 6th-generation Ford Bronco, it retains the factory parking sensors and original intercooler location.\u003c\/p\u003e\n\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eClose-Fitting Steel Design\u003c\/h2\u003e\n\u003cp\u003eCurved steel tubing follows the Bronco's front contours, creating a compact, open profile. Steel plate and additional tubing form the center structure. The hammer black finish contrasts with satin black panels.\u003c\/p\u003e\n\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eIncluded Skid Plate with Intercooler Venting\u003c\/h2\u003e\n\u003cp\u003eThe aluminum skid plate extends beneath the bumper to add lower-front coverage. Its vented design allows airflow to the intercooler, combining protection below the bumper with the factory intercooler's original placement.\u003c\/p\u003e\n\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eTwo Auxiliary-Lighting Layouts\u003c\/h2\u003e\n\u003cp\u003eThe center mounts support a light bar or cube-light setup. The optional PRO Bolt-On Light Hoop adds a second lighting position above the bumper. The hoop and lights are separate purchases.\u003c\/p\u003e\n\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eFitment and Installation\u003c\/h2\u003e\n\u003cp\u003eBroncos equipped with adaptive cruise control require a separate Addictive Desert Designs relocation bracket. The bumper-installation estimate excludes additional lighting wiring.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021-bronco-probolt-on-front.pdf?v=1660663190\"\u003emanufacturer's installation guide\u003c\/a\u003e covers mounting hardware and sensor transfer. Other \u003ca href=\"\/collections\/ford-bronco-front-bumpers\"\u003eFord Bronco front bumpers\u003c\/a\u003e offer different lighting and recovery configurations.\u003c\/p\u003e\n","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43833746948170,"sku":"F238100010103","price":2798.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/f238100010103-pro-bolt-on-bumper-close-up-front-three-quarter.jpg?v=1788231040"},{"product_id":"ford-bronco-rock-fighter-front-bumper-addictive-desert-designs","title":"2021-2027 Ford Bronco Rock Fighter Winch Front Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Rock Fighter Ford Bronco front bumper, part number F230181060103, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose the Rock Fighter for a Bronco build that needs an integrated winch mount, a low top hoop, and trail-focused front clearance. It combines recovery provisions with a center lighting position rather than using the large round-light array found on the Krawler.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe radius plate-steel shape uses high-clearance angles with a louvered lower panel for intercooler airflow. The bumper's low hoop and wing shape are important differences to compare against taller bull-bar designs. The louvered bumper panel should not be confused with the optional full aluminum skid beneath it.\u003c\/p\u003e\n\n\u003ch2\u003eWinch and Soft-Shackle Recovery Provisions\u003c\/h2\u003e\n\u003cp\u003eThe bumper has a standard winch mount and two reinforced clevis mounts that ADD's current listing specifies for soft shackles. Choose compatible recovery equipment rather than carrying over an unsupported load-rating claim. Confirm the dimensions of the actual winch and fairlead you intend to install.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eThe universal center mount accepts up to a 20-inch radius LED bar or five cube lights. Two mounts on top, beside the low hoop, accept round lights. Select the center arrangement first, then determine whether upper lights add useful coverage for your Bronco's trail use.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Does This Bumper Retain?\u003c\/h2\u003e\n\u003cp\u003eFactory parking sensors are retained. ADD offers a separate ACC relocation bracket, and the bumper may block the front camera; consider a compatible camera relocation kit. The OEM skid can fit with trimming, while the optional 3\/16-inch aluminum skid provides a separate replacement option.\u003c\/p\u003e\n\n\u003ch2\u003ePlanning the Complete Winch Setup\u003c\/h2\u003e\n\u003cp\u003eChoose the winch, fairlead, and line as a compatible system before assembling the bumper. Confirm access to the controls and the route for power cables, along with clearance for your chosen lights. A bumper's winch provision is not confirmation that every winch housing will fit. Recovery mounts also need compatible hardware; the bumper purchase alone does not supply a complete recovery system. Check the selected winch and recovery equipment instructions alongside the bumper guide.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2021-bronco-Rock-Fighter-front-install-guide-UPDATED.pdf?v=6057169173943980687\"\u003eRock Fighter front bumper installation guide\u003c\/a\u003e before starting. Match it to SKU F230181060103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe bumper includes the winch-mount provision, low hoop, louvered lower panel, lighting mounts, and reinforced recovery attachments. A full aluminum skid, lights, winch, and electronics relocation accessories are separate purchases. Check the selected package and guide inventory instead of assuming accessories in installed photos are included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43833751994442,"sku":"F230181060103","price":2498.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/f230181060103-rock-fighter-bumper-close-up-winch-light-bar.jpg?v=1788231001"},{"product_id":"ford-bronco-bomber-front-bumper-addictive-desert-designs","title":"2021-2027 Ford Bronco Bomber Front Bumper (Rigid) | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Bomber Ford Bronco front bumper, part number F230194130103, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis Bronco Bomber is the Rigid lighting version. Choose it if you have settled on Rigid 360 lamps and want their dedicated center layout in a close-fitting plate bumper. The other Bomber lighting version uses different center mounts, so select by the lamps you actually intend to run.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe plate-steel bumper follows the Bronco's body lines with a low-profile shape. Hammer black powder coat covers the steel and satin black finishes the aluminum panels. Those panels frame the lights and distinguish the Bomber's face from a universal light-bar bumper.\u003c\/p\u003e\n\n\u003ch2\u003eDedicated Rigid 360 Light Mounts\u003c\/h2\u003e\n\u003cp\u003eThe center panel frames mounting positions for three 6-inch Rigid 360 round lights. These are light-specific provisions, not a promise that any round lamp of similar diameter fits. Check the lamp model before ordering, especially if transferring lights from a previous build or comparing the two Bomber versions.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eTwo additional cube-light positions sit at the sides. This lets your Bronco use the center round lights alongside separate side illumination. Lights and their harnesses are purchased separately. Decide how the lamps will be switched and where the wiring will run before installing the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Does This Bumper Retain?\u003c\/h2\u003e\n\u003cp\u003eThe factory parking sensors are retained. ADD's current listing specifies reinforced clevis mounts for soft shackles. It lists the OEM skid as reusable with trimming, with a matching 3\/16-inch vented aluminum skid available separately. Plan the separate ACC relocation bracket for an equipped Bronco rather than assuming parking-sensor retention covers ACC.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Complete Lighting Setup\u003c\/h2\u003e\n\u003cp\u003eCompare the complete installed setup, not just the bumper's light openings. A light mount does not include the lamp, switch, harness, or connectors. Choose the beam pattern for your intended use and check the housing depth and bracket width before purchase. Plan how the wiring will reach the mounting position without being pinched during assembly. If you already own lights, identify their exact models first; similar nominal sizes can use different housings and mounting brackets.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021-bronco-bomber-front-bumper-installation-instructions.pdf\"\u003eBomber front bumper installation guide\u003c\/a\u003e before starting. Match it to SKU F230194130103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe Rigid Bomber package provides the bumper assembly, aluminum panels, center and side light mounts, and installation provisions. The optional full aluminum skid is separate from the bumper. Lamps, recovery gear, wiring, and electronics relocation equipment are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43833771229258,"sku":"F230194130103","price":2198.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/f230194130103-bomber-rigid-bumper-close-up-front-three-quarter.jpg?v=1788230976"},{"product_id":"ford-bronco-bomber-front-bumper-baja-designs-addictive-desert-designs","title":"2021-2027 Ford Bronco Bomber Front Bumper (Baja) | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Bomber Ford Bronco front bumper, part number F230194120103, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis Bronco Bomber is the Baja lighting version. Choose it if you have settled on Baja Designs LP4 lamps and want their dedicated center layout in a close-fitting plate bumper. The other Bomber lighting version uses different center mounts, so select by the lamps you actually intend to run.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe plate-steel bumper follows the Bronco's body lines with a low-profile shape. Hammer black powder coat covers the steel and satin black finishes the aluminum panels. Those panels frame the lights and distinguish the Bomber's face from a universal light-bar bumper.\u003c\/p\u003e\n\n\u003ch2\u003eDedicated Baja LP4 Light Mounts\u003c\/h2\u003e\n\u003cp\u003eThe center panel frames mounting positions for three Baja Designs LP4 lights. These are light-specific provisions, not a promise that any round lamp of similar diameter fits. Check the lamp model before ordering, especially if transferring lights from a previous build or comparing the two Bomber versions.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eTwo additional cube-light positions sit at the sides. This lets your Bronco use the center round lights alongside separate side illumination. Lights and their harnesses are purchased separately. Decide how the lamps will be switched and where the wiring will run before installing the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Does This Bumper Retain?\u003c\/h2\u003e\n\u003cp\u003eThe factory parking sensors are retained. ADD's current listing specifies reinforced clevis mounts for soft shackles. It lists the OEM skid as reusable with trimming, with a matching 3\/16-inch vented aluminum skid available separately. Plan the separate ACC relocation bracket for an equipped Bronco rather than assuming parking-sensor retention covers ACC.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Complete Lighting Setup\u003c\/h2\u003e\n\u003cp\u003eCompare the complete installed setup, not just the bumper's light openings. A light mount does not include the lamp, switch, harness, or connectors. Choose the beam pattern for your intended use and check the housing depth and bracket width before purchase. Plan how the wiring will reach the mounting position without being pinched during assembly. If you already own lights, identify their exact models first; similar nominal sizes can use different housings and mounting brackets.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021-bronco-bomber-front-bumper-installation-instructions.pdf\"\u003eBomber front bumper installation guide\u003c\/a\u003e before starting. Match it to SKU F230194120103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe Baja Bomber package provides the bumper assembly, aluminum panels, center and side light mounts, and installation provisions. The optional full aluminum skid is separate from the bumper. Lamps, recovery gear, wiring, and electronics relocation equipment are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43833802653770,"sku":"F230194120103","price":2198.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/f230194120103-bomber-baja-bumper-close-up-front-three-quarter.jpg?v=1788230903"},{"product_id":"ford-bronco-stealth-fighter-front-bumper-addictive-desert-designs","title":"2021-2027 Ford Bronco Stealth Fighter Front Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Stealth Fighter Ford Bronco front bumper, part number F230142210103, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThe Stealth Fighter suits a Bronco build emphasizing a low plate-bumper profile and a wide center light opening. Its 30-inch lighting capacity distinguishes it from the smaller center openings of the PRO and Rock Fighter. Choose it around that lighting layout and its recovery provisions.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe radius plate-steel design stays close to the Bronco's front end. A louvered lower panel preserves an airflow path to the intercooler. This gives the bumper a different shape from an open tube assembly or a taller bull-bar design, with inset lights rather than lights perched across the top.\u003c\/p\u003e\n\n\u003ch2\u003eLarge Center Lighting Opening\u003c\/h2\u003e\n\u003cp\u003eThe universal center mounting area accepts up to a 30-inch radius bar or eight cube lights. Compare the actual mounting width and bracket dimensions when choosing a bar. Nominal light length is not the only dimension that determines whether the hardware and housing clear the opening.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eA cube-light mount behind each side panel provides two additional light positions. You can use the center and sides for different coverage needs rather than filling every mount at once. Lamps and harnesses are separate purchases, so plan the complete layout before installing the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Does This Bumper Retain?\u003c\/h2\u003e\n\u003cp\u003eThe bumper retains OEM parking sensors and supplies plugs for Broncos without them. ADD offers an ACC relocation bracket separately. The factory skid can be reused with trimming; the optional 3\/16-inch aluminum skid is a separate replacement. Check front-camera clearance for your chosen lighting arrangement before final assembly.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Complete Lighting Setup\u003c\/h2\u003e\n\u003cp\u003eCompare the complete installed setup, not just the bumper's light openings. A light mount does not include the lamp, switch, harness, or connectors. Choose the beam pattern for your intended use and check the housing depth and bracket width before purchase. Plan how the wiring will reach the mounting position without being pinched during assembly. If you already own lights, identify their exact models first; similar nominal sizes can use different housings and mounting brackets.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021_bronco_stealth_fighter_front_install_guide.pdf\"\u003eStealth Fighter front bumper installation guide\u003c\/a\u003e before starting. Match it to SKU F230142210103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe bumper provides its louvered lower panel, center and side lighting mounts, sensor-hole plugs, and reinforced clevis mounts specified for soft shackles. Lights, recovery gear, the optional aluminum skid, and ACC relocation equipment are separate purchases. Verify the package hardware against the guide.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43833823494218,"sku":"F230142210103","price":2198.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/f230142210103-stealth-fighter-bumper-close-up-front-three-quarter.jpg?v=1788230861"},{"product_id":"ford-bronco-bomber-rear-bumper-addictive-desert-designs","title":"2021-2027 Ford Bronco Bomber Rear Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Bomber Ford Bronco rear bumper, part number R230141090103, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThe Bomber rear bumper suits a Bronco build that needs a slim plate-steel profile, rear cube lights, and recovery attachments while preserving the factory tow hooks. It complements either Bomber front-lighting version; the front choice between Baja and Rigid does not create two different rear lamp packages.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe bumper follows the Bronco's rear body closely, with a plate-steel structure and hammer black powder coat. Satin black aluminum alloy panels frame the accent areas. Compare that slim plate layout with the PRO's tube construction and the Krawler's round rear-light arrangement.\u003c\/p\u003e\n\n\u003ch2\u003eSoft-Shackle Mounts and Accessible Tow Hooks\u003c\/h2\u003e\n\u003cp\u003eTwo reinforced clevis mounts are specified for soft shackles in ADD's current listing. The bumper also sits above the OEM tow hooks so they remain accessible. Use the designated attachments for recovery equipment, and do not infer a recovery load rating from the bumper's material or appearance.\u003c\/p\u003e\n\n\u003ch2\u003eLighting and License-Plate Planning\u003c\/h2\u003e\n\u003cp\u003eTwo universal cube-light mounting points provide rear auxiliary-light positions. Choose the actual lamp dimensions and brackets before planning the harness. Lamps are separate purchases, so include their switching and wiring in your build budget rather than assuming the bumper arrives with working rear lights.\u003c\/p\u003e\n\n\u003ch2\u003eSpare Tire and Factory Equipment\u003c\/h2\u003e\n\u003cp\u003eParking-sensor cutouts retain the original sensor system. A supplied license-plate bracket relocates the plate above the bumper using the spare-carrier mounting points, and the factory plate light can move to that location. Check plate illumination, sensor operation, and spare clearance after assembly.\u003c\/p\u003e\n\n\u003ch2\u003eCheck the Complete Rear Setup\u003c\/h2\u003e\n\u003cp\u003eInspect how the spare, tailgate, license plate, camera, and hitch work together on your Bronco. Space for a larger tire does not increase the factory carrier's weight rating. Wheel offset, spacers, and a replacement carrier can change the tire's actual position. Confirm that the tailgate opens, the plate remains visible and illuminated, and the camera and brake light remain usable with your chosen equipment. These checks matter even when the bumper itself bolts to the original mounting points.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021-bronco-bomber-rear-bumper_1.pdf?v=1660591054\"\u003eBomber rear bumper installation guide\u003c\/a\u003e before starting. Match it to SKU R230141090103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe bumper package includes its plate-steel assembly, aluminum panels, recovery-mount provisions, and license-plate relocation bracket. The OEM plate lamp is reused. Cube lights, recovery gear, and accessory harnesses are separate purchases; check the installation inventory rather than relying on accessories shown on an installed Bronco.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43834069581898,"sku":"R230141090103","price":1898.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/z9bUKk4g.jpg?v=1784754462"},{"product_id":"ford-bronco-rock-fighter-rear-bumper-addictive-desert-designs","title":"2021-2027 Ford Bronco Rock Fighter Rear Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Rock Fighter Ford Bronco rear bumper, part number R23012NA01NA, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThe Rock Fighter rear bumper suits a Bronco owner who wants a low-profile plate design, recovery attachments, and the original tire-mount and camera arrangement. Choose it around those functions instead of expecting the auxiliary-light layout found on other rear bumper series.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe plate-steel shape follows the rear body's contours for a close fit. It is intended for trail use where a compact rear profile matters. Compare that design with the tube construction of the PRO and the round-light mounting of the Krawler when choosing the rear setup for your Bronco.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery Mounts for Soft Shackles\u003c\/h2\u003e\n\u003cp\u003eADD's current listing specifies two reinforced clevis mounts for soft shackles. Those mounts provide designated recovery attachment locations; no load rating is established merely by the word reinforced. Choose compatible recovery gear and inspect the mounting arrangement rather than assuming the earlier hard-shackle wording applies.\u003c\/p\u003e\n\n\u003ch2\u003eLighting and License-Plate Planning\u003c\/h2\u003e\n\u003cp\u003eThe factory license-plate light remains usable. Keep its illumination and the backup camera's view in your installation checks, especially if you change the plate or spare arrangement. The bumper's factory-equipment retention should not be confused with supplying an auxiliary-light package.\u003c\/p\u003e\n\n\u003ch2\u003eSpare Tire and Factory Equipment\u003c\/h2\u003e\n\u003cp\u003eThe original tire mount, backup camera, parking sensors, hitch, and plate light are retained. The included third brake-light relocation bracket raises the lamp for a spare up to 37 inches. Verify wheel position and carrier capacity separately from the bumper's tire-clearance statement.\u003c\/p\u003e\n\n\u003ch2\u003eCheck the Complete Rear Setup\u003c\/h2\u003e\n\u003cp\u003eInspect how the spare, tailgate, license plate, camera, and hitch work together on your Bronco. Space for a larger tire does not increase the factory carrier's weight rating. Wheel offset, spacers, and a replacement carrier can change the tire's actual position. Confirm that the tailgate opens, the plate remains visible and illuminated, and the camera and brake light remain usable with your chosen equipment. These checks matter even when the bumper itself bolts to the original mounting points.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/Bronco-Rock-Fighter-Rear-Bumper.pdf?v=1653431403\"\u003eRock Fighter rear bumper installation guide\u003c\/a\u003e before starting. Match it to SKU R23012NA01NA, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe Rock Fighter package includes the rear bumper assembly, reinforced recovery attachments, and third brake-light relocation bracket. Recovery gear and any additional electrical accessories are separate purchases. Check the guide's parts inventory for the installation hardware and reuse instructions before taking the original rear bumper off.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":43834078986314,"sku":"R23012NA01NA","price":1698.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/aWo6W2MQ.jpg?v=1784754701"},{"product_id":"ford-bronco-krawler-rear-bumper-addictive-desert-designs","title":"2021-2027 Ford Bronco Krawler Rear Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Krawler Ford Bronco rear bumper, part number R230210030103, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis Bronco rear bumper suits a rock-crawling build that needs recovery attachments, round rear lights, and room for a larger spare. It offers a matching rear treatment for a Krawler front bumper, but its useful features should be compared independently of the series name.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eA low-profile plate-steel body sits close to the Bronco's rear contours. Hammer black powder coat covers the main structure, with satin black aluminum accents. The close shape and contrasting panels distinguish it from an open tube bumper and from bumpers whose rear lighting uses small cube cutouts.\u003c\/p\u003e\n\n\u003ch2\u003eRound Lights and Recovery Mounts\u003c\/h2\u003e\n\u003cp\u003eTwo mounts accept 3–4-inch round lights, a meaningful difference from the cube-light mounting used on the Bomber and Stealth Fighter. Reinforced clevis mounts accept 3\/4-inch D-ring shackles. Select lamps and recovery gear that fit those provisions rather than assuming accessories transfer between bumper series.\u003c\/p\u003e\n\n\u003ch2\u003eLighting and License-Plate Planning\u003c\/h2\u003e\n\u003cp\u003eThe round-light mounts provide a starting point for rear trail illumination. Choose the beam and switching arrangement for how you use your Bronco, then match the housings and brackets to the mounts. Lamps and electrical accessories are separate purchases; the bumper is not a complete rear-lighting kit.\u003c\/p\u003e\n\n\u003ch2\u003eSpare Tire and Factory Equipment\u003c\/h2\u003e\n\u003cp\u003eThe OEM tire mount, backup camera, parking sensors, hitch, and trailer harness remain compatible. A supplied plate relocation bracket mounts to the carrier, and the third brake-light extension accommodates up to a 37-inch spare. Check the weight capacity of your carrier separately; tire clearance is not a carrier-strength rating.\u003c\/p\u003e\n\n\u003ch2\u003eCheck the Complete Rear Setup\u003c\/h2\u003e\n\u003cp\u003eInspect how the spare, tailgate, license plate, camera, and hitch work together on your Bronco. Space for a larger tire does not increase the factory carrier's weight rating. Wheel offset, spacers, and a replacement carrier can change the tire's actual position. Confirm that the tailgate opens, the plate remains visible and illuminated, and the camera and brake light remain usable with your chosen equipment. These checks matter even when the bumper itself bolts to the original mounting points.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 4 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021-Bronco-Krawler-Rear-InstallGuide.pdf?v=1693943845\"\u003eKrawler rear bumper installation guide\u003c\/a\u003e before starting. Match it to SKU R230210030103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the bumper assembly, rear plate relocation bracket, and third brake-light extension bracket. The license-plate light is relocated as part of the arrangement. Round lamps, D-ring shackles, and their associated wiring or recovery equipment are separate purchases. Verify all hardware against the guide before starting.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default","offer_id":44097221492810,"sku":"R230210030103","price":1898.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/FkfExeXQ.jpg?v=1787451206"},{"product_id":"ford-bronco-pro-bolt-on-rear-bumper-addictive-desert-designs","title":"2021-2027 Ford Bronco PRO Bolt-On Rear Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs PRO Bolt-On Ford Bronco rear bumper, part number R23857NA0103, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eChoose the PRO rear bumper if you want steel tube styling that follows the Bronco's body closely, with factory towing equipment and reverse sensors retained. It is a different approach from the plate-style Krawler or Stealth Fighter, particularly when open tube construction is part of your build's appearance.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe structure combines .120-inch-wall steel tubing with 1\/8-inch steel plating. Top plates and the rear-facing accent plate are 1\/8-inch aluminum. Hammer black on the steel and satin black on the aluminum create contrast while keeping the individual material sections visible.\u003c\/p\u003e\n\n\u003ch2\u003eTube Construction with Close Body Fit\u003c\/h2\u003e\n\u003cp\u003eThe tube and plate layout follows the contours of the rear body. Compare that shape with a broad plate bumper when deciding how you want your Bronco's rear end to look. Recovery attachments or lighting features listed for another ADD series should not be assumed to be part of this PRO package.\u003c\/p\u003e\n\n\u003ch2\u003eLighting and License-Plate Planning\u003c\/h2\u003e\n\u003cp\u003eThe license-plate relocation bracket moves the plate above and toward the side of the bumper, away from the spare. It uses the original plate light in the relocated position. Plan that wiring and the plate position with your spare setup instead of treating the bracket as a purely cosmetic accessory.\u003c\/p\u003e\n\n\u003ch2\u003eSpare Tire and Factory Equipment\u003c\/h2\u003e\n\u003cp\u003eThe bumper retains the factory hitch, trailer harness, and reverse sensors. A supplied third brake-light extension supports visibility with a spare up to 37 inches. Check actual tire position, carrier load limits, and tailgate movement separately, especially if your Bronco has aftermarket wheel spacers or a changed carrier.\u003c\/p\u003e\n\n\u003ch2\u003eCheck the Complete Rear Setup\u003c\/h2\u003e\n\u003cp\u003eInspect how the spare, tailgate, license plate, camera, and hitch work together on your Bronco. Space for a larger tire does not increase the factory carrier's weight rating. Wheel offset, spacers, and a replacement carrier can change the tire's actual position. Confirm that the tailgate opens, the plate remains visible and illuminated, and the camera and brake light remain usable with your chosen equipment. These checks matter even when the bumper itself bolts to the original mounting points.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021-bronco-pro-bolt-on-rear-installation-instructions.pdf?v=1658181640\"\u003ePRO Bolt-On rear bumper installation guide\u003c\/a\u003e before starting. Match it to SKU R23857NA0103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe PRO package includes the bumper assembly, license-plate relocation bracket, and third brake-light extension. The original license-plate lamp is reused. Do not assume a matching front bumper's optional hoop or lighting equipment is included with this rear assembly; use the rear installation guide's own inventory.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default","offer_id":44097221525578,"sku":"R23857NA0103","price":2398.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/xjjBhq-w.jpg?v=1787451414"},{"product_id":"ford-bronco-stealth-fighter-rear-bumper-addictive-desert-designs","title":"2021-2027 Ford Bronco Stealth Fighter Rear Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Stealth Fighter Ford Bronco rear bumper, part number R230081370103, is listed by ADD for 2021–2026 Ford Bronco models. This is the standard-Bronco version. Confirm any Raptor application separately rather than treating a general Bronco listing as proof of fitment. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis Bronco rear bumper combines a tight plate-bumper profile with cube-light mounts, recovery attachments, and room for a 37-inch spare. It suits owners who want those functions without switching to an open tube rear bumper or a design organized around round rear lamps.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eModern plate steel stays close to the Bronco's rear body. The bumper fits above and around the original hitch and trailer plug rather than requiring those parts to be replaced. Compare the position of the corners and center section when choosing it against another rear bumper.\u003c\/p\u003e\n\n\u003ch2\u003eRear Cube Lights and Recovery Attachments\u003c\/h2\u003e\n\u003cp\u003eTwo rear-facing cube-light mounts provide places to add auxiliary illumination. The current ADD listing specifies reinforced clevis mounts for soft shackles. Match the recovery equipment to those attachments and choose the actual lamp housings by their mounting dimensions, not simply their advertised size.\u003c\/p\u003e\n\n\u003ch2\u003eLighting and License-Plate Planning\u003c\/h2\u003e\n\u003cp\u003ePlan whether the rear lamps will operate from a separate switch or through an appropriate reverse-light wiring setup. The bumper provides the mounts, while lamps and wiring are separate purchases. Keep the electrical connections clear of the hitch and secure the harness before final alignment.\u003c\/p\u003e\n\n\u003ch2\u003eSpare Tire and Factory Equipment\u003c\/h2\u003e\n\u003cp\u003eFactory parking sensors are retained, with plugs for Broncos that lack sensors. The integrated plate mount retains the OEM plate light, and the factory hitch and trailer plug remain compatible. A third brake-light relocation bracket is supplied for a spare up to 37 inches; carrier weight limits remain a separate consideration.\u003c\/p\u003e\n\n\u003ch2\u003eCheck the Complete Rear Setup\u003c\/h2\u003e\n\u003cp\u003eInspect how the spare, tailgate, license plate, camera, and hitch work together on your Bronco. Space for a larger tire does not increase the factory carrier's weight rating. Wheel offset, spacers, and a replacement carrier can change the tire's actual position. Confirm that the tailgate opens, the plate remains visible and illuminated, and the camera and brake light remain usable with your chosen equipment. These checks matter even when the bumper itself bolts to the original mounting points.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2021-bronco-stealth-fighter-rear.pdf?v=1653431403\"\u003eStealth Fighter rear bumper installation guide\u003c\/a\u003e before starting. Match it to SKU R230081370103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Stealth Fighter rear bumper assembly, sensor-hole plugs, recovery mounts, integrated plate-mount provision, and third brake-light relocation bracket. Cube lights, soft shackles, and electrical accessories are separate purchases. Inspect the guide's hardware inventory and check which original parts are reused.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default","offer_id":44097221754954,"sku":"R230081370103","price":1798.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/XzjyOpWQ.jpg?v=1787451506"},{"product_id":"ford-bronco-raptor-phantom-front-bumper-addictive-desert-designs","title":"2022-2027 Ford Bronco Raptor Phantom Front Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Phantom Bronco Raptor front bumper, part number F260262110103, is listed by ADD for 2022–2026 Bronco Raptor models. This Raptor-specific bumper does not fit standard Bronco trims. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThe Phantom suits a Bronco Raptor owner who wants a sharp, low front profile without a tall hoop and with a full aluminum skid included. Compare it with the Raptor Rock Fighter when deciding whether the priority is this knife-edge layout or an integrated winch platform.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe bumper follows the Raptor's front contours with a knife-edge plate design. Hammer black powder coat covers the main structure, while the skid and aluminum accent panels use satin black. The contrasting lower section is part of the supplied assembly rather than an accessory required to complete the appearance.\u003c\/p\u003e\n\n\u003ch2\u003eIncluded 3\/16-Inch Aluminum Skid\u003c\/h2\u003e\n\u003cp\u003eA heavy-duty 3\/16-inch aluminum skid replaces the factory skid, which is incompatible with this bumper. Budgeting the Phantom should account for that included replacement. It avoids having to choose a separate matching skid just to replace the original part removed during bumper installation.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eThe inset center mount accepts a 20-inch radius LED bar or five 3-inch pods. These are alternative layouts in the same location. Choose the lights and their mounting hardware together so the housings, brackets, and wiring fit the space behind the front panel.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Does This Bumper Retain?\u003c\/h2\u003e\n\u003cp\u003eThe bumper retains factory parking sensors. Adaptive cruise control requires the separately sold ACC relocation bracket. Its design includes provisions for adding frame-mounted recovery points; provisions should not be treated as supplied recovery hardware. Confirm camera clearance and the specific recovery accessories before completing your order.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Complete Lighting Setup\u003c\/h2\u003e\n\u003cp\u003eCompare the complete installed setup, not just the bumper's light openings. A light mount does not include the lamp, switch, harness, or connectors. Choose the beam pattern for your intended use and check the housing depth and bracket width before purchase. Plan how the wiring will reach the mounting position without being pinched during assembly. If you already own lights, identify their exact models first; similar nominal sizes can use different housings and mounting brackets.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 4 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2023-BroncoRaptor-Phantom-Front-InstallGuide.pdf?v=14205706567448344860\"\u003ePhantom front bumper installation guide\u003c\/a\u003e before starting. Match it to SKU F260262110103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe Phantom package includes the front bumper assembly, matching 3\/16-inch aluminum skid, accent panels, and lighting provisions. Lamps, ACC relocation equipment, and added frame-mounted recovery accessories are separate purchases. Check the installation-guide inventory for all brackets and fasteners before removing the factory bumper.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default","offer_id":44097221853258,"sku":"F260262110103","price":2498.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/f260262110103-phantom-bumper-close-up-front-three-quarter-light-bar.jpg?v=1788230776"},{"product_id":"ford-bronco-raptor-phantom-rear-bumper-addictive-desert-designs","title":"2022-2027 Ford Bronco Raptor Phantom Rear Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Phantom Bronco Raptor rear bumper, part number R260191090103, is listed by ADD for 2022–2026 Bronco Raptor models. This Raptor-specific bumper does not fit standard Bronco trims. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis Phantom rear bumper is for a Bronco Raptor owner who wants a sharp, low-profile rear shape, recessed cube lights, and recovery attachments. Its knife-edge styling is a natural partner to the Phantom front bumper while keeping the rear equipment choices independent.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe plate-style body uses a low-profile knife-edge design with two-stage hammer black powder coat and satin black aluminum accents. It follows the Raptor's rear contours. The recessed light locations distinguish its layout from the round-lamp Krawler and the open tube construction offered for standard Broncos.\u003c\/p\u003e\n\n\u003ch2\u003eRecessed Lights and Thick Clevis Mounts\u003c\/h2\u003e\n\u003cp\u003eA recessed position on each side accepts a 3-inch cube light. One-inch-thick clevis mounts accept 3\/4-inch D-ring shackles. Select the lamps and recovery hardware for these actual provisions; mount thickness alone does not establish a rated working load for a complete recovery setup.\u003c\/p\u003e\n\n\u003ch2\u003eLighting and License-Plate Planning\u003c\/h2\u003e\n\u003cp\u003eThe light recesses provide rear illumination options without placing the lamps above the bumper. Plan their switching, wiring route, and bracket clearance before fitting the assembly. Lamps and their electrical accessories are separate purchases, so the installed-photo lighting arrangement is not the package contents.\u003c\/p\u003e\n\n\u003ch2\u003eSpare Tire and Factory Equipment\u003c\/h2\u003e\n\u003cp\u003eFactory parking sensors, hitch, and trailer harness or plug remain compatible. The supplied plate bracket moves the license plate upward along the tailgate and reuses the original plate light. The bumper clears up to a 37-inch spare on the factory carrier; verify the carrier load capacity separately.\u003c\/p\u003e\n\n\u003ch2\u003eCheck the Complete Rear Setup\u003c\/h2\u003e\n\u003cp\u003eInspect how the spare, tailgate, license plate, camera, and hitch work together on your Bronco. Space for a larger tire does not increase the factory carrier's weight rating. Wheel offset, spacers, and a replacement carrier can change the tire's actual position. Confirm that the tailgate opens, the plate remains visible and illuminated, and the camera and brake light remain usable with your chosen equipment. These checks matter even when the bumper itself bolts to the original mounting points.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2023-BroncoRaptor-Phantom-Rear-InstallGuide.pdf?v=639995456398775681\"\u003ePhantom rear bumper installation guide\u003c\/a\u003e before starting. Match it to SKU R260191090103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the Phantom rear bumper assembly, accent panels, recovery mounts, and license-plate relocation bracket. The factory plate light is reused in its new position. Cube lights, D-ring shackles, and accessory wiring are separate purchases. Check the guide for the full fastener and bracket inventory.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default","offer_id":44097221918794,"sku":"R260191090103","price":1698.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/Qul6Ipkw.jpg?v=1787451790"},{"product_id":"ford-bronco-raptor-bomber-front-bumper-baja-addictive-desert-designs","title":"2022-2027 Ford Bronco Raptor Bomber Front Bumper (Baja) | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Bomber Bronco Raptor front bumper, part number F260014120103, is listed by ADD for 2022–2026 Bronco Raptor models. This Raptor-specific bumper does not fit standard Bronco trims. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis Bronco Raptor Bomber is the Baja lighting version. Choose it if you have settled on Baja Designs LP4 lamps and want their dedicated center layout in a close-fitting plate bumper. The other Bomber lighting version uses different center mounts, so select by the lamps you actually intend to run.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe plate-steel bumper follows the Raptor's wider front contours with a low-profile shape. Hammer black powder coat covers the steel and satin black finishes the aluminum panels. Those panels frame the lights and distinguish the Bomber's face from a universal light-bar bumper.\u003c\/p\u003e\n\n\u003ch2\u003eDedicated Baja LP4 Light Mounts\u003c\/h2\u003e\n\u003cp\u003eThe center panel frames mounting positions for three Baja Designs LP4 lights. These are light-specific provisions, not a promise that any round lamp of similar diameter fits. Check the lamp model before ordering, especially if transferring lights from a previous build or comparing the two Bomber versions.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eTwo additional cube-light positions sit at the sides. This lets your Bronco Raptor use the center round lights alongside separate side illumination. Lights and their harnesses are purchased separately. Decide how the lamps will be switched and where the wiring will run before installing the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Does This Bumper Retain?\u003c\/h2\u003e\n\u003cp\u003eThe Raptor Bomber does not fit the original skid plate. ADD offers a matching 3\/16-inch vented aluminum replacement separately. Parking sensors and the factory tow hooks remain usable. An ACC relocation bracket is required on equipped vehicles and is a separate purchase; account for it when planning the complete installation.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Complete Lighting Setup\u003c\/h2\u003e\n\u003cp\u003eCompare the complete installed setup, not just the bumper's light openings. A light mount does not include the lamp, switch, harness, or connectors. Choose the beam pattern for your intended use and check the housing depth and bracket width before purchase. Plan how the wiring will reach the mounting position without being pinched during assembly. If you already own lights, identify their exact models first; similar nominal sizes can use different housings and mounting brackets.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2023-BroncoRaptor-Bomber-Front-InstallGuide.pdf?v=3115576915267511106\"\u003eBomber front bumper installation guide\u003c\/a\u003e before starting. Match it to SKU F260014120103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe Baja Bomber package provides the bumper assembly, aluminum panels, center and side light mounts, and installation provisions. The matching aluminum skid is optional; do not assume the removed factory skid can be reused. Lamps, recovery gear, wiring, and electronics relocation equipment are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default","offer_id":44097222017098,"sku":"F260014120103","price":1998.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/f260014120103-bomber-baja-bumper-close-up-front-three-quarter.jpg?v=1788230625"},{"product_id":"ford-bronco-raptor-bomber-front-bumper-rigid-addictive-desert-designs","title":"2022-2027 Ford Bronco Raptor Bomber Front Bumper (Rigid) | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Bomber Bronco Raptor front bumper, part number F260014130103, is listed by ADD for 2022–2026 Bronco Raptor models. This Raptor-specific bumper does not fit standard Bronco trims. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis Bronco Raptor Bomber is the Rigid lighting version. Choose it if you have settled on Rigid 360 lamps and want their dedicated center layout in a close-fitting plate bumper. The other Bomber lighting version uses different center mounts, so select by the lamps you actually intend to run.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe plate-steel bumper follows the Raptor's wider front contours with a low-profile shape. Hammer black powder coat covers the steel and satin black finishes the aluminum panels. Those panels frame the lights and distinguish the Bomber's face from a universal light-bar bumper.\u003c\/p\u003e\n\n\u003ch2\u003eDedicated Rigid 360 Light Mounts\u003c\/h2\u003e\n\u003cp\u003eThe center panel frames mounting positions for three 6-inch Rigid 360 round lights. These are light-specific provisions, not a promise that any round lamp of similar diameter fits. Check the lamp model before ordering, especially if transferring lights from a previous build or comparing the two Bomber versions.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eTwo additional cube-light positions sit at the sides. This lets your Bronco Raptor use the center round lights alongside separate side illumination. Lights and their harnesses are purchased separately. Decide how the lamps will be switched and where the wiring will run before installing the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Does This Bumper Retain?\u003c\/h2\u003e\n\u003cp\u003eThe Raptor Bomber does not fit the original skid plate. ADD offers a matching 3\/16-inch vented aluminum replacement separately. Parking sensors and the factory tow hooks remain usable. An ACC relocation bracket is required on equipped vehicles and is a separate purchase; account for it when planning the complete installation.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Complete Lighting Setup\u003c\/h2\u003e\n\u003cp\u003eCompare the complete installed setup, not just the bumper's light openings. A light mount does not include the lamp, switch, harness, or connectors. Choose the beam pattern for your intended use and check the housing depth and bracket width before purchase. Plan how the wiring will reach the mounting position without being pinched during assembly. If you already own lights, identify their exact models first; similar nominal sizes can use different housings and mounting brackets.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2023-BroncoRaptor-Bomber-Front-InstallGuide.pdf?v=3115576915267511106\"\u003eBomber front bumper installation guide\u003c\/a\u003e before starting. Match it to SKU F260014130103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe Rigid Bomber package provides the bumper assembly, aluminum panels, center and side light mounts, and installation provisions. The matching aluminum skid is optional; do not assume the removed factory skid can be reused. Lamps, recovery gear, wiring, and electronics relocation equipment are separate purchases.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default","offer_id":44097222082634,"sku":"F260014130103","price":1998.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/f260014130103-bomber-bumper-close-up-front-three-quarter.jpg?v=1788230596"},{"product_id":"ford-bronco-raptor-bomber-rear-bumper-addictive-desert-designs","title":"2022-2027 Ford Bronco Raptor Bomber Rear Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Bomber Bronco Raptor rear bumper, part number R260141090103, is listed by ADD for 2022–2026 Bronco Raptor models. This Raptor-specific bumper does not fit standard Bronco trims. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThe Raptor Bomber rear bumper is a separate Raptor-specific assembly for owners who want a slim plate design, rear cube lights, and accessible factory tow hooks. It matches both Bomber front lighting versions, so choose the front lamps independently of this rear bumper.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe plate-steel bumper follows the Raptor's rear contours, finished in hammer black with satin black aluminum panels. Its close-fitting shape is specific to the Raptor application. The standard Bronco Bomber is a different part number and should not be substituted based on the shared series name.\u003c\/p\u003e\n\n\u003ch2\u003eSoft-Shackle Mounts and Accessible Tow Hooks\u003c\/h2\u003e\n\u003cp\u003eTwo reinforced clevis mounts are specified for soft shackles in ADD's current listing. The bumper also sits above the OEM tow hooks so they remain accessible. Use the designated attachments for recovery equipment, and do not infer a recovery load rating from the bumper's material or appearance.\u003c\/p\u003e\n\n\u003ch2\u003eLighting and License-Plate Planning\u003c\/h2\u003e\n\u003cp\u003eTwo universal cube-light mounting points provide rear auxiliary-light positions. Choose the actual lamp dimensions and brackets before planning the harness. Lamps are separate purchases, so include their switching and wiring in your build budget rather than assuming the bumper arrives with working rear lights.\u003c\/p\u003e\n\n\u003ch2\u003eSpare Tire and Factory Equipment\u003c\/h2\u003e\n\u003cp\u003eThe factory parking sensors and OEM tow hooks remain usable. The supplied plate bracket mounts at the spare-carrier attachment points and moves the plate above the bumper. ADD says the Raptor Bomber can run with or without the factory mud flaps; choose the configuration suited to your vehicle.\u003c\/p\u003e\n\n\u003ch2\u003eCheck the Complete Rear Setup\u003c\/h2\u003e\n\u003cp\u003eInspect how the spare, tailgate, license plate, camera, and hitch work together on your Bronco. Space for a larger tire does not increase the factory carrier's weight rating. Wheel offset, spacers, and a replacement carrier can change the tire's actual position. Confirm that the tailgate opens, the plate remains visible and illuminated, and the camera and brake light remain usable with your chosen equipment. These checks matter even when the bumper itself bolts to the original mounting points.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2023-BroncoRaptor-Bomber-Rear-InstallGuide_UPDATED_10.23.2024.pdf?v=16799243889126555421\"\u003eBomber rear bumper installation guide\u003c\/a\u003e before starting. Match it to SKU R260141090103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe bumper package includes its plate-steel assembly, aluminum panels, recovery-mount provisions, and license-plate relocation bracket. The OEM plate lamp is reused. Cube lights, recovery gear, and accessory harnesses are separate purchases; check the installation inventory rather than relying on accessories shown on an installed Bronco.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default","offer_id":44097225261130,"sku":"R260141090103","price":1798.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/5cfZD-Kg.jpg?v=1787451998"},{"product_id":"ford-bronco-raptor-rock-fighter-front-bumper-addictive-desert-designs","title":"2022-2027 Ford Bronco Raptor Rock Fighter Front Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Rock Fighter Bronco Raptor front bumper, part number F260181060103, is listed by ADD for 2022–2026 Bronco Raptor models. This Raptor-specific bumper does not fit standard Bronco trims. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThis Rock Fighter is the Bronco Raptor-specific winch bumper. Choose it for a recovery-equipped trail build that needs a winch mount and high-clearance plate construction shaped around the Raptor fender flares. It is a separate application from the standard Bronco Rock Fighter, not a universal fit across both models.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe Raptor version uses a radius plate-steel design shaped to meet its wider fender flares. A vented bumper skid has louvers for intercooler airflow. The integrated lower panel is part of the bumper; it should not be described as including every optional underbody skid available for the vehicle.\u003c\/p\u003e\n\n\u003ch2\u003eWinch and Soft-Shackle Recovery Provisions\u003c\/h2\u003e\n\u003cp\u003eThe bumper has a standard winch mount and two reinforced clevis mounts that ADD's current listing specifies for soft shackles. Choose compatible recovery equipment rather than carrying over an unsupported load-rating claim. Confirm the dimensions of the actual winch and fairlead you intend to install.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Lights Fit This Bumper?\u003c\/h2\u003e\n\u003cp\u003eThe universal center mount accepts up to a 20-inch radius LED bar or five cube lights. Two mounts on top, beside the low hoop, accept round lights. Select the center arrangement first, then determine whether upper lights add useful coverage for your Bronco's trail use.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Factory Equipment Does This Bumper Retain?\u003c\/h2\u003e\n\u003cp\u003eFactory parking sensors are retained, and ADD offers an ACC relocation bracket separately. Confirm the camera and lower-skid arrangement for your specific Raptor before ordering accessories. ADD notes that WARN winches require an aftermarket fairlead for fitment, so include fairlead selection when planning the winch installation.\u003c\/p\u003e\n\n\u003ch2\u003ePlanning the Complete Winch Setup\u003c\/h2\u003e\n\u003cp\u003eChoose the winch, fairlead, and line as a compatible system before assembling the bumper. Confirm access to the controls and the route for power cables, along with clearance for your chosen lights. A bumper's winch provision is not confirmation that every winch housing will fit. Recovery mounts also need compatible hardware; the bumper purchase alone does not supply a complete recovery system. Check the selected winch and recovery equipment instructions alongside the bumper guide.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/www.addictivedesertdesigns.com\/cdn\/shop\/files\/2023-BroncoRaptor-RockFighter-Front-InstallGuide.pdf?v=6946095400656063270\"\u003eRock Fighter front bumper installation guide\u003c\/a\u003e before starting. Match it to SKU F260181060103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe bumper includes the winch-mount provision, low hoop, louvered lower panel, lighting mounts, and reinforced recovery attachments. A full aluminum skid, lights, winch, and electronics relocation accessories are separate purchases. Check the selected package and guide inventory instead of assuming accessories in installed photos are included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":44108566528074,"sku":"F260181060103","price":2598.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/f260181060103-rock-fighter-bumper-front-three-quarter-close-up.jpg?v=1788224024"},{"product_id":"ford-bronco-raptor-rock-fighter-rear-bumper-addictive-desert-designs","title":"2022-2027 Ford Bronco Raptor Rock Fighter Rear Bumper | Addictive Desert Designs","description":"\u003ch2\u003eWill This Bumper Fit My Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003eThe Addictive Desert Designs Rock Fighter Bronco Raptor rear bumper, part number R26012NA0103, is listed by ADD for 2022–2026 Bronco Raptor models. This Raptor-specific bumper does not fit standard Bronco trims. ADD's current listing ends at 2026, so confirm 2027 compatibility before ordering. Check aftermarket equipment separately from statements about factory components.\u003c\/p\u003e\n\n\u003ch2\u003eWho Is This Bumper Best For?\u003c\/h2\u003e\n\u003cp\u003eThe Raptor Rock Fighter rear bumper is for owners who want a compact plate-steel design shaped to meet the Raptor's large fender flares. It preserves the factory tire-mount and camera arrangement while adding recovery attachments, rather than organizing the rear face around an auxiliary-light array.\u003c\/p\u003e\n\n\u003ch2\u003eHow Is This Bumper Built?\u003c\/h2\u003e\n\u003cp\u003eThe rear contours are specific to the Bronco Raptor, including the transition toward its wider fender flares. Modern plate steel forms the low-profile assembly. Choose this Raptor part instead of the standard Bronco Rock Fighter even though the series names and general appearance are similar.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery Mounts for Soft Shackles\u003c\/h2\u003e\n\u003cp\u003eADD's current listing specifies two reinforced clevis mounts for soft shackles. Those mounts provide designated recovery attachment locations; no load rating is established merely by the word reinforced. Choose compatible recovery gear and inspect the mounting arrangement rather than assuming the earlier hard-shackle wording applies.\u003c\/p\u003e\n\n\u003ch2\u003eLighting and License-Plate Planning\u003c\/h2\u003e\n\u003cp\u003eThe factory license-plate light remains usable. Keep its illumination and the backup camera's view in your installation checks, especially if you change the plate or spare arrangement. The bumper's factory-equipment retention should not be confused with supplying an auxiliary-light package.\u003c\/p\u003e\n\n\u003ch2\u003eSpare Tire and Factory Equipment\u003c\/h2\u003e\n\u003cp\u003eThe bumper retains the factory tire mount, backup camera, parking sensors, hitch, and plate light. ADD explicitly allows installation with or without the original mud flaps. The current Raptor listing does not establish the standard version's included third brake-light extension, so confirm any larger-spare accessories independently.\u003c\/p\u003e\n\n\u003ch2\u003eCheck the Complete Rear Setup\u003c\/h2\u003e\n\u003cp\u003eInspect how the spare, tailgate, license plate, camera, and hitch work together on your Bronco. Space for a larger tire does not increase the factory carrier's weight rating. Wheel offset, spacers, and a replacement carrier can change the tire's actual position. Confirm that the tailgate opens, the plate remains visible and illuminated, and the camera and brake light remain usable with your chosen equipment. These checks matter even when the bumper itself bolts to the original mounting points.\u003c\/p\u003e\n\n\u003ch2\u003eHow Does This Bumper Install?\u003c\/h2\u003e\n\u003cp\u003eThe bumper uses bolt-on mounts, and ADD's guide estimates about 2 hours for removal and bumper installation. Allow additional time for wiring, sensor transfer, and relocation accessories. Arrange assistance for supporting the original bumper and positioning the replacement.\u003c\/p\u003e\u003cp\u003eRead the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/2023-BroncoRaptor-RockFighter-Rear-InstallGuide.pdf?v=1675973551\"\u003eRock Fighter rear bumper installation guide\u003c\/a\u003e before starting. Match it to SKU R26012NA0103, check the hardware inventory, and identify the original parts to reuse. Bolt-on mounting does not make every configuration trimming-free or wiring-free; follow the steps for your actual equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included?\u003c\/h2\u003e\n\u003cp\u003eThe Raptor Rock Fighter package provides the bumper assembly and reinforced recovery attachments, with the installation components listed in its own guide. Soft shackles and other recovery equipment are separate purchases. Do not assume the standard Bronco version's accessory brackets are included with this different Raptor SKU.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's the Warranty?\u003c\/h2\u003e\n\u003cp\u003eADD provides a one-year limited warranty against defects in materials and workmanship from the original purchase date. The manufacturer's terms exclude installation, labor, normal wear, misuse, and collision damage. Keep your purchase record and review the full terms for coverage and claim requirements.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":44108568461386,"sku":"R26012NA0103","price":1698.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/bronco-raptor-bumper_6975cdb3-3b9a-4b60-8459-58a50ba612de.jpg?v=1787712212"},{"product_id":"ford-bronco-full-width-front-bumper-rock-hard-4x4-patriot","title":"2021-2026 Ford Bronco Front Bumper | Rock Hard 4x4 Patriot Series","description":"\u003ch2\u003eBronco Front Bumper Fitment\u003c\/h2\u003e\u003cp\u003eFits all 2021-2026 Ford Bronco models. Keeps the front parking sensors, adaptive cruise radar, collision avoidance system, forward camera and washer. Works with the factory front lower skid plate only if it is the steel skid, not the plastic one.\u003c\/p\u003e\u003ch2\u003eSteel or Aluminum\u003c\/h2\u003e\u003cp\u003eBoth are full width, 1\/4\" thick plate, laser cut, CNC bent and hand welded. The \u003cstrong\u003esteel\u003c\/strong\u003e bumper weighs 90 lbs. The \u003cstrong\u003ealuminum\u003c\/strong\u003e bumper weighs 28 lbs.\u003c\/p\u003e\u003ch2\u003eRecovery \u0026amp; Towing\u003c\/h2\u003e\u003cp\u003e1\" thick, double welded recovery tabs front and back, Hi-Lift jack points, and a flat-towable design. Rock Hard 4x4 sells bolt-on tow bar bracket kits for Reese, Blue Ox and Road Master tow bars that mount to this bumper.\u003c\/p\u003e\u003ch2\u003eFog Lights \u0026amp; Add-ons\u003c\/h2\u003e\u003cp\u003eThe bumper ships with block-off plates. Optional fog light mounting plates fit the factory fog lights or standard 3\" cube and pod lights. Add the RH-60211 winch plate for a standard winch, and the RH-60212 light hoop to protect the winch and relocate the camera.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e100% bolt-on. Powder coat and all hardware included. Made in the USA.\u003c\/p\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Steel","offer_id":67654788186186,"sku":"RH-60210","price":1199.95,"currency_code":"USD","in_stock":true},{"title":"Aluminum","offer_id":67654788218954,"sku":"RH-60240","price":1449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/RH-60210-2.jpg?v=1791683352"},{"product_id":"ford-bronco-rear-bumper-rock-hard-4x4-patriot","title":"2021-2026 Ford Bronco Rear Bumper | Rock Hard 4x4 Patriot Series","description":"\u003ch2\u003eBronco Rear Bumper Fitment\u003c\/h2\u003e\u003cp\u003eFor 2021-2026 Ford Bronco models (not the Bronco Raptor). Keeps the factory parking sensors (grommets and delete plugs included) and works with the factory hitch if equipped.\u003c\/p\u003e\u003ch2\u003eSteel or Aluminum\u003c\/h2\u003e\u003cp\u003eBoth are 1\/4\" thick plate. The \u003cstrong\u003esteel\u003c\/strong\u003e bumper weighs 130 lbs. The \u003cstrong\u003ealuminum\u003c\/strong\u003e bumper weighs 40 lbs.\u003c\/p\u003e\u003ch2\u003eDesign\u003c\/h2\u003e\u003cp\u003eHigh clearance tapered sides for a better departure angle, 1\" thick double welded recovery tabs, and a license plate mount that reuses your plate light.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e100% bolt-on with no cutting, trimming or drilling. Powder coat and all hardware included. Pairs with the Rock Hard 4x4 muffler skid plate. Made in the USA.\u003c\/p\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Steel","offer_id":67654810796106,"sku":"RH-60300","price":1099.95,"currency_code":"USD","in_stock":true},{"title":"Aluminum","offer_id":67654810828874,"sku":"RH-60340","price":1349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/RH-60340-2.jpg?v=1791683417"},{"product_id":"ford-bronco-rear-bumper-tire-carrier-rock-hard-4x4-patriot","title":"2021-2026 Ford Bronco Rear Bumper with Tire Carrier | Rock Hard 4x4 Patriot Series","description":"\u003ch2\u003eBronco Rear Bumper \u0026amp; Tire Carrier Fitment\u003c\/h2\u003e\u003cp\u003eFor 2021-2026 Ford Bronco models (not the Bronco Raptor). Back-up camera compatible with an included plug-and-play connector, parking sensor compatible, factory hitch compatible (if equipped) and factory 3rd brake light compatible.\u003c\/p\u003e\u003ch2\u003eFrame-Mounted Tire Carrier\u003c\/h2\u003e\u003cp\u003eThe bumper and carrier mount to the frame, so there is zero spare tire weight on the tailgate or body. Rated for a 37\" tire. The spare mount adjusts up, down, in and out.\u003c\/p\u003e\u003ch2\u003eLatch \u0026amp; Hub\u003c\/h2\u003e\u003cp\u003eA two-stage latch closes against a striker like a car door, with a safety catch. A bolt-on tailgate vent plate preloads the closed gate to stop rattles and wobble. The serviceable hub uses dual tapered bearings with a grease fitting. A drop-down safety pin keeps the carrier from swinging shut on uneven ground.\u003c\/p\u003e\u003ch2\u003eSpecs\u003c\/h2\u003e\u003cp\u003e1\/4\" thick plate steel. Bumper 144 lbs, tire carrier 76 lbs. Welded-on CB antenna mount and a security tab for a cable lock. Optional Rock Hard 4x4 tank mounts and cargo rack bolt on. The Hi-Lift jack mount is sold separately.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e100% bolt-on with no cutting, trimming or drilling, and plug-and-play electrical connectors. Powder coat and hardware included. Made in the USA.\u003c\/p\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":67654818201674,"sku":"RH-60301","price":1799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/RH-60301-2.jpg?v=1791683352"},{"product_id":"ford-bronco-front-bumper-with-led-fog-lights-barricade-hd-tubular","title":"2021-2026 Ford Bronco Front Bumper with LED Fog Lights | Barricade HD Tubular","description":"\u003cp\u003eThe Barricade HD Tubular front bumper pairs a tubular steel body with two included 3-inch LED fog lights for the 2021–2026 Ford Bronco. An over-rider hoop rises above the bumper face, while two D-ring mounts provide shackle attachment points. This version has no winch mount.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eIncluded cube lights\u003c\/h2\u003e\u003cp\u003eThe two square fog lights use 5-watt CREE LEDs with a 6000K color temperature. Aluminum housings, polycarbonate lenses and an IP67 rating protect the light assemblies against dust and temporary immersion. The lights sit within the bumper instead of requiring a separate external light bar.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eTubular steel and corrosion protection\u003c\/h2\u003e\u003cp\u003eSteel tubing and steel plate form the bumper structure. An epoxy pre-coat sits beneath the textured black powdercoat, adding a protective layer between the steel and the exterior finish. The raised hoop gives the front end a different profile from a flat plate bumper.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eBronco fitment and installation\u003c\/h2\u003e\u003cp\u003eThis sixth-generation Ford Bronco front bumper fits 2021–2026 2-door and 4-door models, excluding Raptor. Installation uses the factory mounting locations without drilling and takes approximately two hours with basic hand tools and a second person. The kit supplies sensor-retaining components, sensor-hole plugs and adaptive cruise control mounting brackets for the bumper conversion.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFord Bronco years and trims\u003c\/h2\u003e\u003cp\u003eFits the 2021–2026 sixth-generation Ford Bronco in 2-door and 4-door configurations. Model years: 2021, 2022, 2023, 2024, 2025 and 2026.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBase: 2021–2023, 2025–2026\u003c\/li\u003e\n\u003cli\u003eBig Bend: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBlack Diamond: 2021–2024\u003c\/li\u003e\n\u003cli\u003eOuter Banks: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBadlands: 2021–2026\u003c\/li\u003e\n\u003cli\u003eWildtrak: 2021–2024\u003c\/li\u003e\n\u003cli\u003eFirst Edition: 2021\u003c\/li\u003e\n\u003cli\u003eEverglades: 2022–2024\u003c\/li\u003e\n\u003cli\u003eHeritage Edition: 2023–2026\u003c\/li\u003e\n\u003cli\u003eHeritage Limited Edition: 2023–2024\u003c\/li\u003e\n\u003cli\u003eStroppe Edition: 2025–2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoes not fit Bronco Raptor or Bronco Sport.\u003c\/p\u003e","brand":"Barricade","offers":[{"title":"Default Title","offer_id":67665949851722,"sku":"FB14576","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/FB14576_alt5.jpg?v=1791836379"},{"product_id":"ford-bronco-front-bumper-barricade-trail-force-hd","title":"2021-2026 Ford Bronco Winch Front Bumper | Barricade Trail Force HD","description":"\u003cp\u003eThe Barricade Trail Force HD front bumper gives the 2021–2026 Ford Bronco a built-in winch plate while retaining OE-size fog light mounting locations. The plate supports a winch rated up to 12,000 pounds, and the two supplied 3\/4-inch D-rings are rated at 9,500 pounds. The winch is sold separately.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eRecovery mounts and lighting choices\u003c\/h2\u003e\u003cp\u003eThe shackle mounts are welded inside and outside the bumper. A raised grille guard hoop carries two additional mounting points for round auxiliary lights. Factory fog lights transfer into the bumper’s OE-size housings, keeping this version distinct from a kit supplied with aftermarket LED cubes. Auxiliary lights are separate accessories.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eSteel plate with a tubular hoop\u003c\/h2\u003e\u003cp\u003eThe body uses 5\/32-inch mild steel plate with 2-inch tubing and a 0.120-inch tube wall. An epoxy pre-coat beneath textured black powdercoat helps resist corrosion. The standard-width layout combines a plate bumper face with an integrated over-rider above it.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eSixth-generation Bronco installation\u003c\/h2\u003e\u003cp\u003eThis Ford Bronco winch bumper fits 2021–2026 2-door and 4-door models excluding Raptor. It attaches at the factory mounting points without cutting, welding or fabrication, with approximately two hours for installation. Supplied bumper spacers and their longer mounting bolts accommodate the winch bumper installation.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFord Bronco years and trims\u003c\/h2\u003e\u003cp\u003eFits the 2021–2026 sixth-generation Ford Bronco in 2-door and 4-door configurations. Model years: 2021, 2022, 2023, 2024, 2025 and 2026.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBase: 2021–2023, 2025–2026\u003c\/li\u003e\n\u003cli\u003eBig Bend: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBlack Diamond: 2021–2024\u003c\/li\u003e\n\u003cli\u003eOuter Banks: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBadlands: 2021–2026\u003c\/li\u003e\n\u003cli\u003eWildtrak: 2021–2024\u003c\/li\u003e\n\u003cli\u003eFirst Edition: 2021\u003c\/li\u003e\n\u003cli\u003eEverglades: 2022–2024\u003c\/li\u003e\n\u003cli\u003eHeritage Edition: 2023–2026\u003c\/li\u003e\n\u003cli\u003eHeritage Limited Edition: 2023–2024\u003c\/li\u003e\n\u003cli\u003eStroppe Edition: 2025–2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoes not fit Bronco Raptor or Bronco Sport.\u003c\/p\u003e","brand":"Barricade","offers":[{"title":"Default Title","offer_id":67665949917258,"sku":"FB16213","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/FB16213_alt11.jpg?v=1791836380"},{"product_id":"ford-bronco-rear-bumper-barricade-hd","title":"2021-2026 Ford Bronco Rear Bumper | Barricade HD","description":"\u003cp\u003eKeep the option to add a swingout carrier later. The Barricade HD rear bumper for the 2021-2026 Ford Bronco supplies the steel bumper, two recovery D-rings, and the mounting provisions for Barricade's separate HD tire carrier. The carrier arm is not part of this bumper-only purchase.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eA Rear Bumper That Accepts a Carrier\u003c\/h2\u003e\u003cp\u003eThe compatible Barricade HD carrier attaches to this bumper to support a swingout spare-tire setup. That compatibility matters when building in stages: the bumper can be fitted first, followed by the matching carrier. The complete bumper-and-carrier package is available separately.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eRecovery Hardware Supplied\u003c\/h2\u003e\u003cp\u003eBoth recovery mounts are welded inside and outside the steel plate. Two D-rings are included, with a manufacturer rating of 9,500 lb for the shackles. The bumper also accommodates the Bronco's factory rear proximity sensors.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eFull-Width Steel Replacement\u003c\/h2\u003e\u003cp\u003eSteel plate replaces the original rear bumper. An epoxy pre-coat beneath textured black powder coating provides the corrosion-resistant finish. Installation reuses the factory mounting points and takes about two hours with basic hand tools and assistance.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eVehicle Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned for 2021-2026 6th-generation Ford Bronco 2-door and 4-door models. The separate Bronco Sport is not compatible.\u003c\/p\u003e\u003cp\u003eThe \u003ca href=\"\/products\/ford-bronco-rear-bumper-with-tire-carrier-barricade-hd\"\u003eBarricade HD rear bumper and tire carrier\u003c\/a\u003e includes the swingout carrier and its relocation components.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFord Bronco years and trims\u003c\/h2\u003e\u003cp\u003eFits the 2021–2026 sixth-generation Ford Bronco in 2-door and 4-door configurations. Model years: 2021, 2022, 2023, 2024, 2025 and 2026.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBase: 2021–2023, 2025–2026\u003c\/li\u003e\n\u003cli\u003eBig Bend: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBlack Diamond: 2021–2024\u003c\/li\u003e\n\u003cli\u003eOuter Banks: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBadlands: 2021–2026\u003c\/li\u003e\n\u003cli\u003eWildtrak: 2021–2024\u003c\/li\u003e\n\u003cli\u003eFirst Edition: 2021\u003c\/li\u003e\n\u003cli\u003eEverglades: 2022–2024\u003c\/li\u003e\n\u003cli\u003eHeritage Edition: 2023–2026\u003c\/li\u003e\n\u003cli\u003eStroppe Edition: 2025–2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoes not fit Bronco Sport.\u003c\/p\u003e","brand":"Barricade","offers":[{"title":"Default Title","offer_id":67665949950026,"sku":"FB50257","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/FB50257_alt11.jpg?v=1791836382"},{"product_id":"ford-bronco-rear-bumper-barricade-trail-force","title":"2021-2026 Ford Bronco Rear Bumper | Barricade Trail Force","description":"\u003cp\u003eThe Barricade Trail Force rear bumper brings included recovery shackles and a wired license-plate lighting setup to the 2021-2026 Ford Bronco. Its full-width mild-steel body replaces the stock bumper while accepting the factory rear proximity sensors.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eLicense Plate Lamps, Not Auxiliary Cube Lights\u003c\/h2\u003e\u003cp\u003eTwo small LED lamps illuminate the license plate. Their pre-installed hardware, plate bracket, and four Scotchlok connectors are supplied. Connecting the lamps requires splicing into the vehicle's license plate lamp wiring. The included lighting block-off plates cover the bumper's separate lighting openings.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eTwo Included Recovery Shackles\u003c\/h2\u003e\u003cp\u003eThe steel D-ring mounts are welded on both sides of the bumper plate. Two 3\/4-inch D-rings are supplied, with a 9,500 lb shackle rating. Left and right end caps and mounting nut plates complete the bumper assembly.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eMild Steel with an Epoxy Undercoat\u003c\/h2\u003e\u003cp\u003eAn epoxy pre-coat sits beneath textured black powder coating to protect the mild-steel plate. Four proximity-sensor installation kits allow the original rear sensors to transfer into the new bumper.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eMounting and Vehicle Fit\u003c\/h2\u003e\u003cp\u003eThis bolt-on rear bumper fits 2021-2026 6th-generation Ford Bronco 2-door and 4-door models, not Bronco Sport. Mounting uses the factory positions without cutting the bumper mounts; the approximately two-hour installation also involves the plate-light wiring.\u003c\/p\u003e\u003cp\u003eThe \u003ca href=\"\/products\/ford-bronco-rear-bumper-barricade-extreme-hd\"\u003eBarricade Extreme HD rear bumper\u003c\/a\u003e uses a 3 mm steel body and also includes D-rings.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFord Bronco years and trims\u003c\/h2\u003e\u003cp\u003eFits the 2021–2026 sixth-generation Ford Bronco in 2-door and 4-door configurations. Model years: 2021, 2022, 2023, 2024, 2025 and 2026.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBase: 2021–2023, 2025–2026\u003c\/li\u003e\n\u003cli\u003eBig Bend: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBlack Diamond: 2021–2024\u003c\/li\u003e\n\u003cli\u003eOuter Banks: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBadlands: 2021–2026\u003c\/li\u003e\n\u003cli\u003eWildtrak: 2021–2024\u003c\/li\u003e\n\u003cli\u003eFirst Edition: 2021\u003c\/li\u003e\n\u003cli\u003eEverglades: 2022–2024\u003c\/li\u003e\n\u003cli\u003eHeritage Edition: 2023–2026\u003c\/li\u003e\n\u003cli\u003eStroppe Edition: 2025–2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoes not fit Bronco Sport.\u003c\/p\u003e","brand":"Barricade","offers":[{"title":"Default Title","offer_id":67665949982794,"sku":"FB50256","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/FB50256_alt11.jpg?v=1791836383"},{"product_id":"ford-bronco-rear-bumper-barricade-hd-tubular","title":"2021-2026 Ford Bronco Rear Bumper | Barricade HD Tubular","description":"\u003cp\u003eThe Barricade HD Tubular Ford Bronco rear bumper replaces the factory bumper with steel tubing, steel plate, and two built-in D-ring mounts. It fits 2021-2026 6th-generation Bronco 2-door and 4-door models, excluding Raptor. Auxiliary-light mounts are built in; lights are sold separately.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eSteel Construction with Rear Recovery Mounts\u003c\/h2\u003e\u003cp\u003eSteel tube sections and plate form the bumper assembly. Two D-ring mounts provide attachment points for recovery hardware. A textured black powder coat covers an epoxy pre-coat to help resist corrosion.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eAuxiliary Lights or Mesh Fill Panels\u003c\/h2\u003e\u003cp\u003eThe bumper's square openings accept compatible cube-style lights. Supplied mesh fill panels cover those openings when lights are not installed; the panels and lights use the same locations. Lighting is a separate purchase for this configuration.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eFactory Backup Sensors and License Plate Relocation\u003c\/h2\u003e\u003cp\u003eRear parking sensors transfer from the factory bumper into dedicated mounts. Included plugs close the sensor openings on Broncos without sensors. The supplied bracket moves the license plate to the spare tire and reuses the factory plate light.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eBronco Fitment and Bolt-On Installation\u003c\/h2\u003e\u003cp\u003eThe bumper attaches to the factory mounting points without drilling those mounts. Installation takes about two hours with basic hand tools and a second person. Routing the relocated plate-light wiring may require cutting and resealing the tailgate's rubber grommet. This bumper does not fit Bronco Sport.\u003c\/p\u003e\u003ch2 style=\"font-size: 26px; line-height: 1.3; margin-top: 1.4em; margin-bottom: 0.6em;\"\u003eThe Version with Lights Included\u003c\/h2\u003e\u003cp\u003eThe \u003ca href=\"\/products\/ford-bronco-rear-bumper-with-led-fog-lights-barricade-hd-tubular\"\u003eBarricade HD Tubular LED Rear Bumper\u003c\/a\u003e includes two square LED lights. More configurations are available in the \u003ca href=\"\/collections\/ford-bronco-rear-bumpers\"\u003eFord Bronco rear bumper collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFord Bronco years and trims\u003c\/h2\u003e\u003cp\u003eFits the 2021–2026 sixth-generation Ford Bronco in 2-door and 4-door configurations. Model years: 2021, 2022, 2023, 2024, 2025 and 2026.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBase: 2021–2023, 2025–2026\u003c\/li\u003e\n\u003cli\u003eBig Bend: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBlack Diamond: 2021–2024\u003c\/li\u003e\n\u003cli\u003eOuter Banks: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBadlands: 2021–2026\u003c\/li\u003e\n\u003cli\u003eWildtrak: 2021–2024\u003c\/li\u003e\n\u003cli\u003eFirst Edition: 2021\u003c\/li\u003e\n\u003cli\u003eEverglades: 2022–2024\u003c\/li\u003e\n\u003cli\u003eHeritage Edition: 2023–2026\u003c\/li\u003e\n\u003cli\u003eStroppe Edition: 2025–2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoes not fit Bronco Raptor or Bronco Sport.\u003c\/p\u003e","brand":"Barricade","offers":[{"title":"Default Title","offer_id":67665950048330,"sku":"FB14611","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/FB14611_alt11.jpg?v=1791836385"},{"product_id":"ford-bronco-front-bumper-barricade-extreme-hd","title":"2021-2026 Ford Bronco Winch Front Bumper | Barricade Extreme HD","description":"\u003cp\u003eThe Barricade Extreme HD front bumper combines full-width steel coverage with a winch plate supporting up to a 12,000-pound winch. Built for the 2021–2026 Ford Bronco, it accommodates the factory fog lights, proximity sensors and adaptive cruise control. Two D-rings are included; the winch and auxiliary lights are separate.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFactory equipment, additional light mounts\u003c\/h2\u003e\u003cp\u003eOE-size fog light tabs provide mounting locations for the Bronco’s original fog lights. The over-rider bar adds two tabs for aftermarket auxiliary lights above the bumper face, allowing forward lighting at two different heights. Four proximity sensor mounting kits are supplied for transferring the factory sensors.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFull-width steel construction\u003c\/h2\u003e\u003cp\u003eThe bumper body combines steel plate with steel tubing. Its D-ring mounts bolt into place, with the supplied 3\/4-inch D-rings providing shackle attachment hardware on both sides of the winch location. An epoxy pre-coat and textured black powdercoat form a two-stage finish to help limit corrosion.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eDirect replacement for the stock bumper\u003c\/h2\u003e\u003cp\u003eThis sixth-generation Bronco front winch bumper fits 2021–2026 2-door and 4-door models excluding Raptor. The assembly reuses the factory bumper mounting points without cutting or vehicle modifications. Installation takes approximately two hours with basic hand tools and a second person to support the bumper during mounting.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFord Bronco years and trims\u003c\/h2\u003e\u003cp\u003eFits the 2021–2026 sixth-generation Ford Bronco in 2-door and 4-door configurations. Model years: 2021, 2022, 2023, 2024, 2025 and 2026.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBase: 2021–2023, 2025–2026\u003c\/li\u003e\n\u003cli\u003eBig Bend: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBlack Diamond: 2021–2024\u003c\/li\u003e\n\u003cli\u003eOuter Banks: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBadlands: 2021–2026\u003c\/li\u003e\n\u003cli\u003eWildtrak: 2021–2024\u003c\/li\u003e\n\u003cli\u003eFirst Edition: 2021\u003c\/li\u003e\n\u003cli\u003eEverglades: 2022–2024\u003c\/li\u003e\n\u003cli\u003eHeritage Edition: 2023–2026\u003c\/li\u003e\n\u003cli\u003eHeritage Limited Edition: 2023–2024\u003c\/li\u003e\n\u003cli\u003eStroppe Edition: 2025–2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoes not fit Bronco Raptor or Bronco Sport.\u003c\/p\u003e","brand":"Barricade","offers":[{"title":"Default Title","offer_id":67665950113866,"sku":"FB29807","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/FB29807_alt11.jpg?v=1791836386"},{"product_id":"ford-bronco-front-bumper-barricade-hd-tubular","title":"2021-2026 Ford Bronco Front Bumper | Barricade HD Tubular","description":"\u003cp\u003eThe Barricade HD Tubular front bumper replaces the stock 2021–2026 Ford Bronco bumper with a steel tube-and-plate assembly, raised grille hoop and two D-ring mounts. Its auxiliary light brackets allow a separate lighting choice, rather than bundling a particular pair of fog lights. This model has no winch mount.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eLight mounts without a bundled light kit\u003c\/h2\u003e\u003cp\u003eBuilt-in auxiliary mounting locations provide a place for aftermarket off-road lights. Lights are sold separately, so their beam pattern and output can be selected to suit the build. For the version supplied with two 3-inch LED fog lights, the \u003ca href=\"\/products\/ford-bronco-front-bumper-with-led-fog-lights-barricade-hd-tubular\"\u003eHD Tubular LED bumper\u003c\/a\u003e includes that equipment.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eRaised hoop and layered finish\u003c\/h2\u003e\u003cp\u003eThe bull-nose hoop extends above the bumper body, while separate left and right shackle mount brackets sit at the front. Tubular steel and steel plate provide the structure. An epoxy base coat under the textured black powdercoat helps protect the steel against corrosion.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFactory-location mounting\u003c\/h2\u003e\u003cp\u003eThis sixth-generation Ford Bronco tubular bumper fits 2021–2026 2-door and 4-door models excluding Raptor. Installation bolts to the factory mounting locations without drilling and takes approximately two hours with a second person. The kit includes sensor caps and plugs, light brackets, and adaptive cruise control mounting components.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFord Bronco years and trims\u003c\/h2\u003e\u003cp\u003eFits the 2021–2026 sixth-generation Ford Bronco in 2-door and 4-door configurations. Model years: 2021, 2022, 2023, 2024, 2025 and 2026.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBase: 2021–2023, 2025–2026\u003c\/li\u003e\n\u003cli\u003eBig Bend: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBlack Diamond: 2021–2024\u003c\/li\u003e\n\u003cli\u003eOuter Banks: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBadlands: 2021–2026\u003c\/li\u003e\n\u003cli\u003eWildtrak: 2021–2024\u003c\/li\u003e\n\u003cli\u003eFirst Edition: 2021\u003c\/li\u003e\n\u003cli\u003eEverglades: 2022–2024\u003c\/li\u003e\n\u003cli\u003eHeritage Edition: 2023–2026\u003c\/li\u003e\n\u003cli\u003eHeritage Limited Edition: 2023–2024\u003c\/li\u003e\n\u003cli\u003eStroppe Edition: 2025–2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoes not fit Bronco Raptor or Bronco Sport.\u003c\/p\u003e","brand":"Barricade","offers":[{"title":"Default Title","offer_id":67665950179402,"sku":"FB14572","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/FB14572_alt11.jpg?v=1791836388"},{"product_id":"ford-bronco-front-bumper-barricade-trail-force","title":"2021-2026 Ford Bronco Winch Front Bumper | Barricade Trail Force","description":"\u003cp\u003eThe Barricade Trail Force front bumper brings a mid-width steel body, a tubular grille guard and a 12,000-pound-capacity winch plate to the 2021–2026 Ford Bronco. Two included 3\/4-inch D-rings are rated at 9,500 pounds, giving the bumper shackle hardware as well as a mounting platform for a separately purchased winch.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eTwo levels of auxiliary lighting\u003c\/h2\u003e\u003cp\u003eRound fog light mounting points in the bumper accept aftermarket off-road lights. Two additional mounts on the grille hoop provide an upper position for auxiliary lighting. Lights are sold separately, allowing the bumper’s lower and upper mounts to serve different lighting needs.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003ePlate body and welded shackle mounts\u003c\/h2\u003e\u003cp\u003eBarricade uses 5\/32-inch mild steel plate and 2-inch tubing with a 0.120-inch wall. The D-ring mounts are welded on both sides of the bumper. Epoxy pre-coating and textured black powdercoat protect the steel with a two-stage finish.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eSensor and adaptive cruise control transfer\u003c\/h2\u003e\u003cp\u003eThis sixth-generation Bronco winch bumper supports factory front proximity sensors and adaptive cruise control. Relocating the ACC module into the bumper requires shutter assembly disassembly and rerouting the original wiring harness. The bumper itself bolts to the factory mounting points without cutting, with an approximate two-hour installation time. Fitment covers 2021–2026 2-door and 4-door Ford Broncos excluding Raptor.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFord Bronco years and trims\u003c\/h2\u003e\u003cp\u003eFits the 2021–2026 sixth-generation Ford Bronco in 2-door and 4-door configurations. Model years: 2021, 2022, 2023, 2024, 2025 and 2026.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBase: 2021–2023, 2025–2026\u003c\/li\u003e\n\u003cli\u003eBig Bend: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBlack Diamond: 2021–2024\u003c\/li\u003e\n\u003cli\u003eOuter Banks: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBadlands: 2021–2026\u003c\/li\u003e\n\u003cli\u003eWildtrak: 2021–2024\u003c\/li\u003e\n\u003cli\u003eFirst Edition: 2021\u003c\/li\u003e\n\u003cli\u003eEverglades: 2022–2024\u003c\/li\u003e\n\u003cli\u003eHeritage Edition: 2023–2026\u003c\/li\u003e\n\u003cli\u003eHeritage Limited Edition: 2023–2024\u003c\/li\u003e\n\u003cli\u003eStroppe Edition: 2025–2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoes not fit Bronco Raptor or Bronco Sport.\u003c\/p\u003e","brand":"Barricade","offers":[{"title":"Default Title","offer_id":67665950244938,"sku":"FB50383","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/FB50383_alt11.jpg?v=1791836390"},{"product_id":"ford-bronco-full-width-front-bumper-with-led-fog-lights-barricade-hd-plate-style","title":"2021-2026 Ford Bronco LED Front Bumper | Barricade HD Plate","description":"\u003cp\u003eThe Barricade HD Plate front bumper combines full-width steel plate construction with two included LED cube fog lights for the 2021–2026 Ford Bronco. A bull-nose grille hoop rises above the bumper, and two D-ring mounts provide shackle attachment points. This is the non-winch LED version of the HD Plate bumper.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003e6000K LED cube fog lights\u003c\/h2\u003e\u003cp\u003eThe supplied pair of fog lights produces 6000K white light. Each assembly uses an aluminum housing and polycarbonate lens with an IP67 protection rating. The cube lights mount within the plate bumper, providing integrated lighting without a separate light bar above the grille.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eCold-formed plate body\u003c\/h2\u003e\u003cp\u003eBarricade cold-forms the steel plate into the bumper’s full-width shape. An epoxy pre-coat beneath textured black powdercoat provides a two-stage corrosion-resistant finish. Mesh fill panels cover the center and side openings, while separate inner and outer support brackets secure the assembly.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eWith or without parking sensors\u003c\/h2\u003e\u003cp\u003eThis sixth-generation Ford Bronco front bumper accepts factory front parking sensors and also fits Broncos without them. Sensor retaining caps, foam spacers and hole plugs are supplied for the two configurations. Fitment covers 2021–2026 2-door and 4-door models excluding Raptor. The bumper reuses factory mounting points without cutting, with installation taking approximately two hours using basic hand tools and a second person.\u003c\/p\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin-top:1.4em;margin-bottom:.6em;\"\u003eFord Bronco years and trims\u003c\/h2\u003e\u003cp\u003eFits the 2021–2026 sixth-generation Ford Bronco in 2-door and 4-door configurations. Model years: 2021, 2022, 2023, 2024, 2025 and 2026.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBase: 2021–2023, 2025–2026\u003c\/li\u003e\n\u003cli\u003eBig Bend: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBlack Diamond: 2021–2024\u003c\/li\u003e\n\u003cli\u003eOuter Banks: 2021–2026\u003c\/li\u003e\n\u003cli\u003eBadlands: 2021–2026\u003c\/li\u003e\n\u003cli\u003eWildtrak: 2021–2024\u003c\/li\u003e\n\u003cli\u003eFirst Edition: 2021\u003c\/li\u003e\n\u003cli\u003eEverglades: 2022–2024\u003c\/li\u003e\n\u003cli\u003eHeritage Edition: 2023–2026\u003c\/li\u003e\n\u003cli\u003eHeritage Limited Edition: 2023–2024\u003c\/li\u003e\n\u003cli\u003eStroppe Edition: 2025–2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDoes not fit Bronco Raptor or Bronco Sport.\u003c\/p\u003e","brand":"Barricade","offers":[{"title":"Default Title","offer_id":67665950277706,"sku":"FB25419","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/FB25419_alt9.jpg?v=1791836391"}],"url":"https:\/\/broncoforge.com\/collections\/ford-bronco-bumpers.oembed?page=2","provider":"BRONCO FORGE","version":"1.0","type":"link"}