{"title":"Cold Air Intakes for the 2021-2026 Ford Bronco","description":"\u003cp\u003eShop \u003cstrong\u003eFord Bronco cold air intakes\u003c\/strong\u003e for the 2.3L and 2.7L EcoBoost engines, plus dedicated systems for the 3.0L Bronco Raptor. Compare enclosed airboxes, dry filters, and oiled-filter kits from Roush, K\u0026amp;N, aFe, Injen, COBB, S\u0026amp;B, CVF, Mishimoto, Volant, and CORSA. Each listing identifies the engine, model years, filter version, and included parts so you can choose the right intake for your Bronco.\u003c\/p\u003e\n\u003ch2\u003eWhat Does a Cold Air Intake Do on a Ford Bronco?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAn aftermarket intake changes the filter, airbox, intake plumbing, or a combination of those parts to reduce restriction.\u003c\/strong\u003e The exact scope depends on the kit. Some systems replace more of the factory airflow path, while others retain more original components. Look at the included-parts list and installation instructions rather than assuming every intake replaces the same pieces.\u003c\/p\u003e\n\u003cp\u003eIntake and turbo sounds can become more noticeable under load. Published airflow and horsepower figures describe a particular test setup; a percentage increase in airflow does not mean the same percentage increase in engine power. Compare results for the exact engine and part number, rather than applying a Raptor result to a 2.3L or 2.7L Bronco.\u003c\/p\u003e\n\u003ch2\u003eShould You Choose a Dry or Oiled Bronco Intake Filter?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the filter by its service requirements as well as the intake design.\u003c\/strong\u003e Oiled cotton filters need the specified cleaner, drying time, and filter oil. Dry filters use no oil, but they do not all share the same cleaning process. A washable dry element, S\u0026amp;B Dry Extendable filter, and Donaldson PowerCore filter can require different care.\u003c\/p\u003e\n\u003cp\u003eThe product title identifies the filter supplied with that listing. Other filter versions are separate purchases unless the box contents explicitly say otherwise. Dusty trail use can require earlier inspection than normal highway driving, so follow the filter manufacturer's instructions for your driving conditions.\u003c\/p\u003e\n\u003ch2\u003eWhich Cold Air Intake Fits a 2.3L or 2.7L Ford Bronco?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMatch the engine and model-year range first.\u003c\/strong\u003e A trim badge or door count alone does not identify every under-hood connection. This collection includes different 2.3L and 2.7L systems, including separate early and later Injen applications. Some 2.3L listings stop at 2024, while the K\u0026amp;N NextGen application here covers 2025–2026.\u003c\/p\u003e\n\u003cp\u003eFactory snorkels and engine-bay accessories also matter. COBB and CORSA list restrictions involving the factory snorkel arrangement, and Mishimoto identifies an incompatibility with the KR Off-Road ARB compressor bracket. Read each listing's notes before combining an intake with existing accessories.\u003c\/p\u003e\n\u003ch2\u003eDo These Intake Systems Fit the Bronco Raptor?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOnly listings that specifically identify the 3.0L Bronco Raptor should be selected for that engine.\u003c\/strong\u003e The regular Bronco's 2.3L and 2.7L intake systems are not substitutes. Raptor-specific choices in this collection include aFe Momentum GT, K\u0026amp;N Series 63 AirCharger, and S\u0026amp;B systems. Check the filter configuration and supported years on the individual product page.\u003c\/p\u003e\n\u003ch2\u003eDoes a Ford Bronco Cold Air Intake Require a Tune?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe systems listed here are identified as not requiring a tune for their stated applications.\u003c\/strong\u003e That does not establish compatibility with every other engine modification or calibration. Follow the instructions for the exact part number, including any sensor transfers, vent connections, mounting steps, and required checks after installation.\u003c\/p\u003e\n\u003cp\u003eIf you are also comparing exhaust upgrades, browse our \u003ca href=\"\/collections\/ford-bronco-exhaust\"\u003eFord Bronco exhaust systems\u003c\/a\u003e. Intake and exhaust fitment should each be verified independently.\u003c\/p\u003e\n\u003ch2\u003eWhich 6th-Gen Ford Bronco Models Fit These Cold Air Intakes?\u003c\/h2\u003e\n\u003cp\u003eThis collection includes systems listed for the \u003cstrong\u003e2021, 2022, 2023, 2024, 2025, and 2026 sixth-generation Ford Bronco\u003c\/strong\u003e, including selected Bronco Raptor applications. Every item does not fit every engine or model year. CORSA's confirmed ranges here are 2021–2024 for the 2.3L and 2021–2025 for the 2.7L. These products do not fit the separate Bronco Sport.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine and year:\u003c\/strong\u003e Match the exact application on the product page.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e Confirm whether the supplied element is dry or oiled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExisting equipment:\u003c\/strong\u003e Check snorkel, compressor-bracket, and intake-plumbing compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmissions approval:\u003c\/strong\u003e Check the approval and restrictions for the exact part and vehicle application before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure which intake fits your Bronco? Call or text \u003cstrong\u003e(909) 772-8050\u003c\/strong\u003e with your engine, model year, and current setup.\u003c\/p\u003e","products":[{"product_id":"2021-2026-ford-bronco-2-3l-2-7l-cold-air-intake-with-dry-filter-roush","title":"2021-2026 Ford Bronco 2.3L \/ 2.7L Cold Air Intake with Dry Filter | Roush","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.3L \/ 2.7L Cold Air Intake with Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Roush intake is offered for the 2021-2026 Ford Bronco with the 2.3L \/ 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 422233.\u003c\/p\u003e\u003cp\u003eThe Roush intake keeps the engine bay close to its factory appearance while adding filter area and easier access for inspection. Its injection-molded lid fits over the intake location and uses a gasket to seal the assembly. A clear window lets you check the filter without first removing the lid. That makes a quick look after a dusty trail simpler, although a visual check does not replace the full service procedure.\u003c\/p\u003e\u003cp\u003eRoush lists a 30% increase in filtration area compared with the original filter. This figure describes the filter surface, rather than a promised percentage increase in engine power. The included pre-filter helps keep larger debris away from the main element. Roush also lists retention of the factory water-fording capability; correct assembly, intact seals, and the vehicle’s operating limits still matter.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e30% more filter area than the OE element\u003c\/li\u003e\n\u003cli\u003eClear lid window for quick filter checks\u003c\/li\u003e\n\u003cli\u003eIncluded pre-filter helps intercept debris\u003c\/li\u003e\n\u003cli\u003eInjection-molded construction keeps a factory-like look\u003c\/li\u003e\n\u003cli\u003eDry filter requires no filter oil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 422233. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.3L \/ 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRoush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e422233\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB12857\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L \/ 2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Air Box Lid Assembly\u003c\/li\u003e\n\u003cli\u003e(1) Foam Seal Lid\u003c\/li\u003e\n\u003cli\u003e(1) Air Filter\u003c\/li\u003e\n\u003cli\u003e(1) Roush Badge\u003c\/li\u003e\n\u003cli\u003e(1) Customer Care Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eRoush lists CARB EO D-418-50. Approval applies only to vehicles covered by that Executive Order.\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":67937650966602,"sku":"FB12857","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/roush-bronco-cold-air-intake-422233.FB12857_Off_01.webp?v=1794255382"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-oiled-filter-k-n-series-63-aircharger","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Oiled Filter | K\u0026N Series 63 AirCharger","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis K\u0026amp;N intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 63-2619.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N builds this intake around the engine application and filter configuration named above. Its molded plastic intake route gives incoming air a different path from the original system. The filter and tube are selected together as a kit, so a filter element by itself is not the same purchase as this intake. The 2.3L, 2.7L, and Raptor versions have different application listings and should not be treated as interchangeable.\u003c\/p\u003e\u003cp\u003eThe intake can make turbo and induction sounds easier to hear as airflow rises under load. That sound change does not tell you how much horsepower the vehicle gained. Any published power result applies to a particular test vehicle and set of conditions. Correct mounting, secure clamps, and intact seals remain essential after installation. Where the system reuses a sensor or vent connection, transfer it exactly as the instructions show rather than leaving a port open.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMolded plastic intake route for the listed engine\u003c\/li\u003e\n\u003cli\u003eSupplied filter matches this exact kit configuration\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eApplication-specific mounting and connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter with a media-specific cleaning procedure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 63-2619. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK\u0026amp;N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e63-2619\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB13682\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Air Filter\u003c\/li\u003e\n\u003cli\u003e(1) Air Box\u003c\/li\u003e\n\u003cli\u003e(1) Passenger Side Tube\u003c\/li\u003e\n\u003cli\u003e(1) Driver Side Tube\u003c\/li\u003e\n\u003cli\u003e(1) Bracket\u003c\/li\u003e\n\u003cli\u003e(1) Extension Harness\u003c\/li\u003e\n\u003cli\u003e(10) Bolts\u003c\/li\u003e\n\u003cli\u003e(8) Split Lock Washers\u003c\/li\u003e\n\u003cli\u003e(10) Flat Washers\u003c\/li\u003e\n\u003cli\u003e(1) Precleaner Top Frame\u003c\/li\u003e\n\u003cli\u003e(1) Foam Insert\u003c\/li\u003e\n\u003cli\u003e(1) Precleaner BTM Frame\u003c\/li\u003e\n\u003cli\u003e(7) Hose Clamps\u003c\/li\u003e\n\u003cli\u003e(1) Adaptor\u003c\/li\u003e\n\u003cli\u003e(1) Hose Hump\u003c\/li\u003e\n\u003cli\u003e(1) Grommet\u003c\/li\u003e\n\u003cli\u003e(2) Hoses\u003c\/li\u003e\n\u003cli\u003e(1) Nylock Nut\u003c\/li\u003e\n\u003cli\u003e(4) Zip Ties\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eThis listing does not establish CARB approval. The supplier identifies emissions restrictions; not for sale or use on California pollution-controlled vehicles where prohibited.\u003c\/p\u003e","brand":"K\u0026N","offers":[{"title":"Default Title","offer_id":67937650999370,"sku":"FB13682","price":525.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/kn-bronco-series-63-aircharger-cold-air-intake-63-2619.FB13682.webp?v=1794255384"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-pro-dry-s-filter-afe-momentum-gt","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Pro DRY S Filter | aFe Momentum GT","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Pro DRY S Filter\u003c\/h2\u003e\u003cp\u003eThis aFe intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 50-70081D.\u003c\/p\u003e\u003cp\u003eThe Momentum GT system pairs a molded intake housing with a filter chosen for this exact application. Its filter-to-housing connection puts the element directly into the enclosure, while the clear inspection window makes the filter easier to check. The housing and intake route are designed around the Bronco engine listed here. This matters because the 2.3L, 2.7L, and Raptor 3.0L versions use different parts even when their outer appearance is similar.\u003c\/p\u003e\u003cp\u003eThe supplied couplings and clamps secure the airflow path between the housing and the engine connections. Proper seating matters as much as the size of the filter: an air leak or loose connection can undermine the installation. The Momentum GT design uses the vehicle’s factory mounting locations. Keep the housing supported at those mounts rather than letting a coupler carry its weight. Inspect the window seal and filter connection during routine service.\u003c\/p\u003e\u003cp\u003eaFe reports up to 13 hp and 20 lb-ft of torque, with 26% more airflow in its testing. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eaFe reports up to 13 hp and 20 lb-ft of torque, with 26% more airflow in its testing.\u003c\/li\u003e\n\u003cli\u003eMomentum GT housing with a filter inspection window\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake route and factory mounting locations\u003c\/li\u003e\n\u003cli\u003eIncluded filter matches the media named in this listing\u003c\/li\u003e\n\u003cli\u003eClamps and couplings secure the intake connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter for repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 50-70081D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eaFe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e50-70081D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB13753\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Cold Air Intake with Pro DRY S Filter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eThis listing does not establish CARB approval. The supplier identifies emissions restrictions; not for sale or use on California pollution-controlled vehicles where prohibited.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":67937651032138,"sku":"FB13753","price":545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/afe-bronco-momentum-gt-cold-air-intake-pro-dry-s-filter-black-50-70081d.FB13753.webp?v=1794255387"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-dry-filter-injen-evolution","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Dry Filter | Injen Evolution","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Injen intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part EVO9302.\u003c\/p\u003e\u003cp\u003eThe Evolution system gives this Bronco application a purpose-built intake route and the filter type identified in the title. Choose by engine and model year before comparing dry and oiled versions. Injen offers multiple Evolution systems for the 2.7L Bronco, including an early 2021-2022 application and a separate later listing. Those part numbers remain separate here so an overlapping year range does not hide a different kit.\u003c\/p\u003e\u003cp\u003eA sound change can be easier to notice than a power change. Intake plumbing and filter design affect how clearly you hear air movement as the turbocharged engine works. Actual power depends on the engine, calibration, test conditions, and the rest of the vehicle. Use this kit’s listed specifications to compare it with another intake; do not apply a horsepower figure from a different Evolution part number. Follow Injen’s instructions for the exact system when positioning its connections and mounting points.\u003c\/p\u003e\u003cp\u003eInjen reports test gains of up to 26 hp and 27 lb-ft of torque for this application. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInjen reports test gains of up to 26 hp and 27 lb-ft of torque for this application.\u003c\/li\u003e\n\u003cli\u003eEvolution intake matched to the listed engine and years\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eDry or oiled element supplied as named in the title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty subject to Injen terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part EVO9302. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInjen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eEVO9302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB60001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Air Box\u003c\/li\u003e\n\u003cli\u003e(1) Passenger Side Tube\u003c\/li\u003e\n\u003cli\u003e(1) Driver Side Tube\u003c\/li\u003e\n\u003cli\u003e(1) Clear Window\u003c\/li\u003e\n\u003cli\u003e(2) Push On Retaining Rings\u003c\/li\u003e\n\u003cli\u003e(1) 5\/8\" Machined Crankcase Fitting\u003c\/li\u003e\n\u003cli\u003e(1) Crankcase Fitting\u003c\/li\u003e\n\u003cli\u003e(1) Crankcase Gasket\u003c\/li\u003e\n\u003cli\u003e(1) M6 × 10 Mm SS Cap Screw\u003c\/li\u003e\n\u003cli\u003e(1) 3.00\" Hump Hose\u003c\/li\u003e\n\u003cli\u003e(1) 2.00\"-3.50\" Stepping Hump Hose\u003c\/li\u003e\n\u003cli\u003e(1) 2.25\"-3.00\" Stepping Hump Hose\u003c\/li\u003e\n\u003cli\u003e(2) SAE 048 Clamps\u003c\/li\u003e\n\u003cli\u003e(1) SAE 056 Clamp\u003c\/li\u003e\n\u003cli\u003e(1) SAE 036 Clamp\u003c\/li\u003e\n\u003cli\u003e(1) M6 Vibra Mount (Male\/Male)\u003c\/li\u003e\n\u003cli\u003e(1) 1\/4\" × 1\" Fender Washer\u003c\/li\u003e\n\u003cli\u003e(1) M6 × 1.0 Serrated Flange Locknut\u003c\/li\u003e\n\u003cli\u003e(1) Air Temp Sensor Adapter\u003c\/li\u003e\n\u003cli\u003e(1) M4-7 × 10 Button Head Screw\u003c\/li\u003e\n\u003cli\u003e(1) PCV Release Tool\u003c\/li\u003e\n\u003cli\u003e(1) Twist Lock Filter\u003c\/li\u003e\n\u003cli\u003e(1) SAE 032 Clamp\u003c\/li\u003e\n\u003cli\u003e(1) 90° CNC Machined Fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":67937651064906,"sku":"FB60001","price":566.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/injen-bronco-evolution-cold-air-intake-dry-filter-evo9302.FB60001.webp?v=1794255388"},{"product_id":"2022-2026-ford-bronco-raptor-cold-air-intake-with-pro-5r-oiled-filter-afe-momentum-gt","title":"2022-2026 Ford Bronco Raptor Cold Air Intake with Pro 5R Oiled Filter | aFe Momentum GT","description":"\u003ch2\u003e2022-2026 Ford Bronco Raptor Cold Air Intake with Pro 5R Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis aFe intake is offered for the 2022-2026 Ford Bronco with the 3.0L EcoBoost engine. It is a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 50-70109R.\u003c\/p\u003e\u003cp\u003eThe Momentum GT system pairs a molded intake housing with a filter chosen for this exact application. Its filter-to-housing connection puts the element directly into the enclosure, while the clear inspection window makes the filter easier to check. The housing and intake route are designed around the Bronco engine listed here. This matters because the 2.3L, 2.7L, and Raptor 3.0L versions use different parts even when their outer appearance is similar.\u003c\/p\u003e\u003cp\u003eThe supplied couplings and clamps secure the airflow path between the housing and the engine connections. Proper seating matters as much as the size of the filter: an air leak or loose connection can undermine the installation. The Momentum GT design uses the vehicle’s factory mounting locations. Keep the housing supported at those mounts rather than letting a coupler carry its weight. Inspect the window seal and filter connection during routine service.\u003c\/p\u003e\u003cp\u003eaFe reports up to 10 hp and 17 lb-ft of torque, with an 18% airflow increase in its testing. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eaFe reports up to 10 hp and 17 lb-ft of torque, with an 18% airflow increase in its testing.\u003c\/li\u003e\n\u003cli\u003eMomentum GT housing with a filter inspection window\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake route and factory mounting locations\u003c\/li\u003e\n\u003cli\u003eIncluded filter matches the media named in this listing\u003c\/li\u003e\n\u003cli\u003eClamps and couplings secure the intake connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter for repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. The Raptor’s 3.0L engine requires a Raptor-specific intake, and this listing covers that application. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 50-70109R. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2022-2026 Ford Bronco, 3.0L EcoBoost Raptor only. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eaFe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e50-70109R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB59358\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2022-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e3.0L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Cold Air Intake\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":67937651097674,"sku":"FB59358","price":556.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/afe-bronco-momentum-gt-cold-air-intake-pro-5r-oiled-filter-black-50-70109r.FB59358.webp?v=1794255391"},{"product_id":"2021-2022-ford-bronco-2-7l-cold-air-intake-with-dry-filter-injen-evolution","title":"2021-2022 Ford Bronco 2.7L Cold Air Intake with Dry Filter | Injen Evolution","description":"\u003ch2\u003e2021-2022 Ford Bronco 2.7L Cold Air Intake with Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Injen intake is offered for the 2021-2022 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part EVO9301.\u003c\/p\u003e\u003cp\u003eThe Evolution system gives this Bronco application a purpose-built intake route and the filter type identified in the title. Choose by engine and model year before comparing dry and oiled versions. Injen offers multiple Evolution systems for the 2.7L Bronco, including an early 2021-2022 application and a separate later listing. Those part numbers remain separate here so an overlapping year range does not hide a different kit.\u003c\/p\u003e\u003cp\u003eA sound change can be easier to notice than a power change. Intake plumbing and filter design affect how clearly you hear air movement as the turbocharged engine works. Actual power depends on the engine, calibration, test conditions, and the rest of the vehicle. Use this kit’s listed specifications to compare it with another intake; do not apply a horsepower figure from a different Evolution part number. Follow Injen’s instructions for the exact system when positioning its connections and mounting points.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvolution intake matched to the listed engine and years\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eDry or oiled element supplied as named in the title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty subject to Injen terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part EVO9301. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2022 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Early 2021-2022 2.7L application; do not substitute for EVO9302 without confirming the manufacturer instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInjen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eEVO9301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB25292\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2022 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Dry Filter\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":67937651130442,"sku":"FB25292","price":472.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/injen-bronco-evolution-cold-air-intake-dry-filter-evo9301.FB25292.webp?v=1794255393"},{"product_id":"2021-2024-ford-bronco-2-3l-cold-air-intake-with-dry-filter-injen-evolution","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with Dry Filter | Injen Evolution","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Injen intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part EVO9300.\u003c\/p\u003e\u003cp\u003eThe Evolution system gives this Bronco application a purpose-built intake route and the filter type identified in the title. Choose by engine and model year before comparing dry and oiled versions. Injen offers multiple Evolution systems for the 2.7L Bronco, including an early 2021-2022 application and a separate later listing. Those part numbers remain separate here so an overlapping year range does not hide a different kit.\u003c\/p\u003e\u003cp\u003eA sound change can be easier to notice than a power change. Intake plumbing and filter design affect how clearly you hear air movement as the turbocharged engine works. Actual power depends on the engine, calibration, test conditions, and the rest of the vehicle. Use this kit’s listed specifications to compare it with another intake; do not apply a horsepower figure from a different Evolution part number. Follow Injen’s instructions for the exact system when positioning its connections and mounting points.\u003c\/p\u003e\u003cp\u003eInjen reports test gains of up to 13 hp and 13 lb-ft of torque for this application. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInjen reports test gains of up to 13 hp and 13 lb-ft of torque for this application.\u003c\/li\u003e\n\u003cli\u003eEvolution intake matched to the listed engine and years\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eDry or oiled element supplied as named in the title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty subject to Injen terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part EVO9300. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInjen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eEVO9300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB25290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Cold Air Intake Assembly\u003c\/li\u003e\n\u003cli\u003e(1) Dry Air Filter\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eThis listing does not establish CARB approval. The supplier identifies emissions restrictions; not for sale or use on California pollution-controlled vehicles where prohibited.\u003c\/p\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":67937651163210,"sku":"FB25290","price":453.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/injen-bronco-evolution-cold-air-intake-dry-filter-evo9300.FB25290.webp?v=1794255395"},{"product_id":"2021-2026-ford-bronco-2-3l-2-7l-cold-air-intake-with-dry-filter-cobb","title":"2021-2026 Ford Bronco 2.3L \/ 2.7L Cold Air Intake with Dry Filter | COBB","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.3L \/ 2.7L Cold Air Intake with Dry Filter\u003c\/h2\u003e\u003cp\u003eThis COBB intake is offered for the 2021-2026 Ford Bronco with the 2.3L \/ 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 7R1100.\u003c\/p\u003e\u003cp\u003eThe COBB system uses an injection-molded airbox lid and a dedicated filter while keeping a factory-like appearance under the hood. Two window panels are supplied. The clear polycarbonate panel closes the window opening and lets you see the filter. The aluminum mesh panel leaves that opening ventilated for a more open configuration. You can select the panel that suits your use without buying a second lid.\u003c\/p\u003e\u003cp\u003eCOBB reports roughly 9% more airflow with the clear panel and roughly 21% more with the mesh panel in its testing. These are airflow comparisons, not promised horsepower gains. The window choice also changes how exposed the opening is to the surrounding environment. The system does not connect to the stock Everglades snorkel. The 3.0L Bronco Raptor is outside this listing, even though the kit serves both regular Bronco EcoBoost engines.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear and aluminum mesh window panels included\u003c\/li\u003e\n\u003cli\u003eInjection-molded lid with a factory-like appearance\u003c\/li\u003e\n\u003cli\u003eCOBB filter supplied with the intake assembly\u003c\/li\u003e\n\u003cli\u003eFits regular Bronco 2.3L and 2.7L applications\u003c\/li\u003e\n\u003cli\u003eNot compatible with the factory Everglades snorkel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 7R1100. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.3L \/ 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the Ford factory snorkel \/ Everglades intake system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCOBB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e7R1100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB49077\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L \/ 2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBronco airbox lid\u003c\/li\u003e\n\u003cli\u003eWindow gasket and bottom gasket\u003c\/li\u003e\n\u003cli\u003eIntake baffle\u003c\/li\u003e\n\u003cli\u003eClear intake window\u003c\/li\u003e\n\u003cli\u003eAluminum mesh intake window\u003c\/li\u003e\n\u003cli\u003e12 M5 x 8 mm button-head bolts\u003c\/li\u003e\n\u003cli\u003eCOBB intake air filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCOBB lists CARB EOs D-660-177, D-660-292, and D-660-355. Confirm your exact vehicle is covered by the applicable Executive Order.\u003c\/p\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":67937651195978,"sku":"FB49077","price":415.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/cobb-bronco-cold-air-intake-7r1100.FB49077.webp?v=1794255397"},{"product_id":"2022-2026-ford-bronco-raptor-cold-air-intake-with-oiled-filter-k-n-series-63-aircharger","title":"2022-2026 Ford Bronco Raptor Cold Air Intake with Oiled Filter | K\u0026N Series 63 AirCharger","description":"\u003ch2\u003e2022-2026 Ford Bronco Raptor Cold Air Intake with Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis K\u0026amp;N intake is offered for the 2022-2026 Ford Bronco with the 3.0L EcoBoost engine. It is a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 63-2625.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N builds this intake around the engine application and filter configuration named above. Its molded plastic intake route gives incoming air a different path from the original system. The filter and tube are selected together as a kit, so a filter element by itself is not the same purchase as this intake. The 2.3L, 2.7L, and Raptor versions have different application listings and should not be treated as interchangeable.\u003c\/p\u003e\u003cp\u003eThe intake can make turbo and induction sounds easier to hear as airflow rises under load. That sound change does not tell you how much horsepower the vehicle gained. Any published power result applies to a particular test vehicle and set of conditions. Correct mounting, secure clamps, and intact seals remain essential after installation. Where the system reuses a sensor or vent connection, transfer it exactly as the instructions show rather than leaving a port open.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N lists a tested gain of 27.06 hp at 4,254 rpm and 31.26 lb-ft of torque. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eK\u0026amp;N lists a tested gain of 27.06 hp at 4,254 rpm and 31.26 lb-ft of torque.\u003c\/li\u003e\n\u003cli\u003eMolded plastic intake route for the listed engine\u003c\/li\u003e\n\u003cli\u003eSupplied filter matches this exact kit configuration\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eApplication-specific mounting and connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter with a media-specific cleaning procedure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. The Raptor’s 3.0L engine requires a Raptor-specific intake, and this listing covers that application. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 63-2625. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2022-2026 Ford Bronco, 3.0L EcoBoost Raptor only. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK\u0026amp;N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e63-2625\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB58245\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2022-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e3.0L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Cold Air Intake\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eThis listing does not establish CARB approval. The supplier identifies emissions restrictions; not for sale or use on California pollution-controlled vehicles where prohibited.\u003c\/p\u003e","brand":"K\u0026N","offers":[{"title":"Default Title","offer_id":67937651654730,"sku":"FB58245","price":525.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/kn-bronco-series-63-aircharger-cold-air-intake-63-2625.FB58245.webp?v=1794255414"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-pro-guard-7-oiled-filter-afe-momentum-gt","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Pro-GUARD 7 Oiled Filter | aFe Momentum GT","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Pro-GUARD 7 Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis aFe intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 50-70081G.\u003c\/p\u003e\u003cp\u003eThe Momentum GT system pairs a molded intake housing with a filter chosen for this exact application. Its filter-to-housing connection puts the element directly into the enclosure, while the clear inspection window makes the filter easier to check. The housing and intake route are designed around the Bronco engine listed here. This matters because the 2.3L, 2.7L, and Raptor 3.0L versions use different parts even when their outer appearance is similar.\u003c\/p\u003e\u003cp\u003eThe supplied couplings and clamps secure the airflow path between the housing and the engine connections. Proper seating matters as much as the size of the filter: an air leak or loose connection can undermine the installation. The Momentum GT design uses the vehicle’s factory mounting locations. Keep the housing supported at those mounts rather than letting a coupler carry its weight. Inspect the window seal and filter connection during routine service.\u003c\/p\u003e\u003cp\u003eaFe reports up to 12 hp and 19 lb-ft of torque, with 17% more airflow in its testing. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eaFe reports up to 12 hp and 19 lb-ft of torque, with 17% more airflow in its testing.\u003c\/li\u003e\n\u003cli\u003eMomentum GT housing with a filter inspection window\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake route and factory mounting locations\u003c\/li\u003e\n\u003cli\u003eIncluded filter matches the media named in this listing\u003c\/li\u003e\n\u003cli\u003eClamps and couplings secure the intake connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter for repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 50-70081G. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eaFe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e50-70081G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB13754\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Cold Air Intake\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":67937651687498,"sku":"FB13754","price":556.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/afe-bronco-momentum-gt-cold-air-intake-pro-guard-7-oiled-filter-black-50-70081g.FB13754.webp?v=1794255416"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-oiled-filter-injen-evolution","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Oiled Filter | Injen Evolution","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis Injen intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part EVO9302C.\u003c\/p\u003e\u003cp\u003eThe Evolution system gives this Bronco application a purpose-built intake route and the filter type identified in the title. Choose by engine and model year before comparing dry and oiled versions. Injen offers multiple Evolution systems for the 2.7L Bronco, including an early 2021-2022 application and a separate later listing. Those part numbers remain separate here so an overlapping year range does not hide a different kit.\u003c\/p\u003e\u003cp\u003eA sound change can be easier to notice than a power change. Intake plumbing and filter design affect how clearly you hear air movement as the turbocharged engine works. Actual power depends on the engine, calibration, test conditions, and the rest of the vehicle. Use this kit’s listed specifications to compare it with another intake; do not apply a horsepower figure from a different Evolution part number. Follow Injen’s instructions for the exact system when positioning its connections and mounting points.\u003c\/p\u003e\u003cp\u003eInjen reports test gains of up to 26 hp and 27 lb-ft of torque for this application. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInjen reports test gains of up to 26 hp and 27 lb-ft of torque for this application.\u003c\/li\u003e\n\u003cli\u003eEvolution intake matched to the listed engine and years\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eDry or oiled element supplied as named in the title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty subject to Injen terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part EVO9302C. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInjen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eEVO9302C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB60002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Air Intake\u003c\/li\u003e\n\u003cli\u003e(1) Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":67937651785802,"sku":"FB60002","price":566.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/injen-bronco-evolution-cold-air-intake-oiled-filter-evo9302c.FB60002.webp?v=1794255418"},{"product_id":"2022-2026-ford-bronco-raptor-cold-air-intake-with-pro-dry-s-filter-afe-momentum-gt","title":"2022-2026 Ford Bronco Raptor Cold Air Intake with Pro DRY S Filter | aFe Momentum GT","description":"\u003ch2\u003e2022-2026 Ford Bronco Raptor Cold Air Intake with Pro DRY S Filter\u003c\/h2\u003e\u003cp\u003eThis aFe intake is offered for the 2022-2026 Ford Bronco with the 3.0L EcoBoost engine. It is a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 50-70109D.\u003c\/p\u003e\u003cp\u003eThe Momentum GT system pairs a molded intake housing with a filter chosen for this exact application. Its filter-to-housing connection puts the element directly into the enclosure, while the clear inspection window makes the filter easier to check. The housing and intake route are designed around the Bronco engine listed here. This matters because the 2.3L, 2.7L, and Raptor 3.0L versions use different parts even when their outer appearance is similar.\u003c\/p\u003e\u003cp\u003eThe supplied couplings and clamps secure the airflow path between the housing and the engine connections. Proper seating matters as much as the size of the filter: an air leak or loose connection can undermine the installation. The Momentum GT design uses the vehicle’s factory mounting locations. Keep the housing supported at those mounts rather than letting a coupler carry its weight. Inspect the window seal and filter connection during routine service.\u003c\/p\u003e\u003cp\u003eaFe reports up to 6 hp and 10 lb-ft of torque, with 17% more airflow in its testing. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eaFe reports up to 6 hp and 10 lb-ft of torque, with 17% more airflow in its testing.\u003c\/li\u003e\n\u003cli\u003eMomentum GT housing with a filter inspection window\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake route and factory mounting locations\u003c\/li\u003e\n\u003cli\u003eIncluded filter matches the media named in this listing\u003c\/li\u003e\n\u003cli\u003eClamps and couplings secure the intake connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter for repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. The Raptor’s 3.0L engine requires a Raptor-specific intake, and this listing covers that application. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 50-70109D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2022-2026 Ford Bronco, 3.0L EcoBoost Raptor only. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eaFe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e50-70109D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB59359\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2022-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e3.0L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Air Intake Kit\u003c\/li\u003e\n\u003cli\u003e(1) Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":67937651818570,"sku":"FB59359","price":581.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/afe-bronco-momentum-gt-cold-air-intake-pro-dry-s-filter-black-50-70109d.FB59359.webp?v=1794255420"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-dry-filter-k-n-dryflow","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Dry Filter | K\u0026N DRYFLOW","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Dry Filter\u003c\/h2\u003e\u003cp\u003eThis K\u0026amp;N intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 30-2619.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N builds this intake around the engine application and filter configuration named above. Its molded plastic intake route gives incoming air a different path from the original system. The filter and tube are selected together as a kit, so a filter element by itself is not the same purchase as this intake. The 2.3L, 2.7L, and Raptor versions have different application listings and should not be treated as interchangeable.\u003c\/p\u003e\u003cp\u003eThe intake can make turbo and induction sounds easier to hear as airflow rises under load. That sound change does not tell you how much horsepower the vehicle gained. Any published power result applies to a particular test vehicle and set of conditions. Correct mounting, secure clamps, and intact seals remain essential after installation. Where the system reuses a sensor or vent connection, transfer it exactly as the instructions show rather than leaving a port open.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N lists a tested horsepower gain of 14.35 hp at 5,007 rpm. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eK\u0026amp;N lists a tested horsepower gain of 14.35 hp at 5,007 rpm.\u003c\/li\u003e\n\u003cli\u003eMolded plastic intake route for the listed engine\u003c\/li\u003e\n\u003cli\u003eSupplied filter matches this exact kit configuration\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eApplication-specific mounting and connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter with a media-specific cleaning procedure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 30-2619. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK\u0026amp;N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e30-2619\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB28630\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) High-Flow Air Filter\u003c\/li\u003e\n\u003cli\u003e(1) Intake Tube\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eThis listing does not establish CARB approval. The supplier identifies emissions restrictions; not for sale or use on California pollution-controlled vehicles where prohibited.\u003c\/p\u003e","brand":"K\u0026N","offers":[{"title":"Default Title","offer_id":67937651851338,"sku":"FB28630","price":525.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/kn-bronco-dryflow-cold-air-intake-30-2619.FB28630.webp?v=1794255423"},{"product_id":"2021-2024-ford-bronco-2-3l-cold-air-intake-with-oiled-cleanable-cotton-filter-s-b","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with Oiled Cleanable Cotton Filter | S\u0026B","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with Oiled Cleanable Cotton Filter\u003c\/h2\u003e\u003cp\u003eThis S\u0026amp;B intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 75-5160.\u003c\/p\u003e\u003cp\u003eThis S\u0026amp;B intake uses a large airbox and an engine-specific airflow path with the filter configuration named in the title. The cotton-cleanable and dry-extendable versions are separate products. Selecting one does not supply both filter types. Choose the maintenance routine you prefer before ordering, then match the engine and model-year range. The Bronco Raptor system is its own 3.0L application rather than a substitute for a regular Bronco kit.\u003c\/p\u003e\u003cp\u003eS\u0026amp;B publishes airflow comparisons for its intake systems to show how restriction changes in testing. Those results describe air movement under test conditions, not a guaranteed horsepower increase on every vehicle. The airbox, inlet, and filter work as an assembly, so correctly seating the lid and connections is important. An intake designed for improved airflow still needs a properly fitted filter to keep dirt out of the engine.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge airbox paired with the listed filter version\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake and inlet arrangement\u003c\/li\u003e\n\u003cli\u003eChoose cotton-cleanable or dry-extendable media by SKU\u003c\/li\u003e\n\u003cli\u003eIntake design reduces restriction compared with stock\u003c\/li\u003e\n\u003cli\u003eRaptor kits are listed separately for the 3.0L engine\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 75-5160. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e75-5160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB49081\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Cold Air Intake Tube\u003c\/li\u003e\n\u003cli\u003e(1) Air Filter\u003c\/li\u003e\n\u003cli\u003e(1) Airbox\u003c\/li\u003e\n\u003cli\u003eMounting Hardware and Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"S\u0026B","offers":[{"title":"Default Title","offer_id":67937651884106,"sku":"FB49081","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/sb-bronco-cold-air-intake-with-oiled-cleanable-cotton-filter-75-5160.FB49081.webp?v=1794255425"},{"product_id":"2021-2024-ford-bronco-2-3l-cold-air-intake-with-dry-filter-k-n-dryflow","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with Dry Filter | K\u0026N DRYFLOW","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with Dry Filter\u003c\/h2\u003e\u003cp\u003eThis K\u0026amp;N intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 30-2620.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N builds this intake around the engine application and filter configuration named above. Its molded plastic intake route gives incoming air a different path from the original system. The filter and tube are selected together as a kit, so a filter element by itself is not the same purchase as this intake. The 2.3L, 2.7L, and Raptor versions have different application listings and should not be treated as interchangeable.\u003c\/p\u003e\u003cp\u003eThe intake can make turbo and induction sounds easier to hear as airflow rises under load. That sound change does not tell you how much horsepower the vehicle gained. Any published power result applies to a particular test vehicle and set of conditions. Correct mounting, secure clamps, and intact seals remain essential after installation. Where the system reuses a sensor or vent connection, transfer it exactly as the instructions show rather than leaving a port open.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N lists a tested gain of 10.35 hp at 5,342 rpm and 22.83 lb-ft of torque. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eK\u0026amp;N lists a tested gain of 10.35 hp at 5,342 rpm and 22.83 lb-ft of torque.\u003c\/li\u003e\n\u003cli\u003eMolded plastic intake route for the listed engine\u003c\/li\u003e\n\u003cli\u003eSupplied filter matches this exact kit configuration\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eApplication-specific mounting and connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter with a media-specific cleaning procedure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 30-2620. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK\u0026amp;N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e30-2620\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB28631\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) DRYFLOW Cold Air Intake\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eThis listing does not establish CARB approval. The supplier identifies emissions restrictions; not for sale or use on California pollution-controlled vehicles where prohibited.\u003c\/p\u003e","brand":"K\u0026N","offers":[{"title":"Default Title","offer_id":67937651916874,"sku":"FB28631","price":473.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/kn-bronco-dryflow-cold-air-intake-30-2620.FB28631.webp?v=1794255427"},{"product_id":"2021-2024-ford-bronco-2-3l-cold-air-intake-with-oiled-filter-k-n-series-63-aircharger","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with Oiled Filter | K\u0026N Series 63 AirCharger","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis K\u0026amp;N intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 63-2620.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N builds this intake around the engine application and filter configuration named above. Its molded plastic intake route gives incoming air a different path from the original system. The filter and tube are selected together as a kit, so a filter element by itself is not the same purchase as this intake. The 2.3L, 2.7L, and Raptor versions have different application listings and should not be treated as interchangeable.\u003c\/p\u003e\u003cp\u003eThe intake can make turbo and induction sounds easier to hear as airflow rises under load. That sound change does not tell you how much horsepower the vehicle gained. Any published power result applies to a particular test vehicle and set of conditions. Correct mounting, secure clamps, and intact seals remain essential after installation. Where the system reuses a sensor or vent connection, transfer it exactly as the instructions show rather than leaving a port open.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMolded plastic intake route for the listed engine\u003c\/li\u003e\n\u003cli\u003eSupplied filter matches this exact kit configuration\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eApplication-specific mounting and connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter with a media-specific cleaning procedure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 63-2620. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK\u0026amp;N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e63-2620\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB25571\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOiled air filter\u003c\/li\u003e\n\u003cli\u003eIntake tube and adapter\u003c\/li\u003e\n\u003cli\u003eCouplers, hoses, and vent fittings\u003c\/li\u003e\n\u003cli\u003eClamps, mounting fasteners, washers, and cable ties\u003c\/li\u003e\n\u003cli\u003ePre-cleaner frame and foam insert\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"K\u0026N","offers":[{"title":"Default Title","offer_id":67937651949642,"sku":"FB25571","price":473.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/kn-bronco-series-63-aircharger-cold-air-intake-63-2620.FB25571.webp?v=1794255429"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-dry-filter-cvf-pro-performance","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Dry Filter | CVF Pro Performance","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Dry Filter\u003c\/h2\u003e\u003cp\u003eThis CVF intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 27BRINT.\u003c\/p\u003e\u003cp\u003eThe CVF Pro Performance intake combines a five-layer dry element with an intake assembly designed for the listed EcoBoost engine. It keeps the original front air-feed arrangement rather than asking you to select a universal filter and fabricate a mount. The washable element provides a serviceable alternative to a disposable filter. A dry element uses no filter oil, so maintenance should follow the cleaner and drying instructions for that media.\u003c\/p\u003e\u003cp\u003eCVF lists this system as using factory mounting points without vehicle modification. Fit the housing securely before tightening the connecting clamps so the parts settle into their intended positions. Airflow measurements help compare restriction under a controlled test, but they do not translate directly into the same percentage increase in horsepower. Keep the engine application and the exact part number in view when comparing the 2.3L and 2.7L versions.\u003c\/p\u003e\u003cp\u003eCVF reports 36% more airflow than stock and a measured flow of 310 CFM at 7 inches H2O. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCVF reports 36% more airflow than stock and a measured flow of 310 CFM at 7 inches H2O.\u003c\/li\u003e\n\u003cli\u003eWashable five-layer dry filter needs no filter oil\u003c\/li\u003e\n\u003cli\u003eFactory mounting points; no vehicle modification listed\u003c\/li\u003e\n\u003cli\u003eRetains the original front air-feed arrangement\u003c\/li\u003e\n\u003cli\u003eEngine-specific Pro Performance intake design\u003c\/li\u003e\n\u003cli\u003eCVF lifetime warranty subject to manufacturer terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 27BRINT. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCVF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e27BRINT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB62660\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Air Intake\u003c\/li\u003e\n\u003cli\u003e(1) Air Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"CVF","offers":[{"title":"Default Title","offer_id":67937651982410,"sku":"FB62660","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/cvf-bronco-pro-performance-cold-air-intake-27brint.FB62660.webp?v=1794255431"},{"product_id":"2021-2024-ford-bronco-2-3l-cold-air-intake-with-pro-guard-7-oiled-filter-afe-momentum-gt","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with Pro-GUARD 7 Oiled Filter | aFe Momentum GT","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with Pro-GUARD 7 Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis aFe intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 50-70082G.\u003c\/p\u003e\u003cp\u003eThe Momentum GT system pairs a molded intake housing with a filter chosen for this exact application. Its filter-to-housing connection puts the element directly into the enclosure, while the clear inspection window makes the filter easier to check. The housing and intake route are designed around the Bronco engine listed here. This matters because the 2.3L, 2.7L, and Raptor 3.0L versions use different parts even when their outer appearance is similar.\u003c\/p\u003e\u003cp\u003eThe supplied couplings and clamps secure the airflow path between the housing and the engine connections. Proper seating matters as much as the size of the filter: an air leak or loose connection can undermine the installation. The Momentum GT design uses the vehicle’s factory mounting locations. Keep the housing supported at those mounts rather than letting a coupler carry its weight. Inspect the window seal and filter connection during routine service.\u003c\/p\u003e\u003cp\u003eaFe reports up to 8 hp and 12 lb-ft of torque, with 24% more airflow in its testing. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eaFe reports up to 8 hp and 12 lb-ft of torque, with 24% more airflow in its testing.\u003c\/li\u003e\n\u003cli\u003eMomentum GT housing with a filter inspection window\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake route and factory mounting locations\u003c\/li\u003e\n\u003cli\u003eIncluded filter matches the media named in this listing\u003c\/li\u003e\n\u003cli\u003eClamps and couplings secure the intake connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter for repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 50-70082G. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eaFe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e50-70082G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB13757\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Cold Air Intake with Pro-GUARD 7 Oiled Filter\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":67937652015178,"sku":"FB13757","price":451.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/afe-bronco-momentum-gt-cold-air-intake-pro-guard-7-oiled-filter-black-50-70082g.FB13757.webp?v=1794255433"},{"product_id":"2025-2026-ford-bronco-2-3l-cold-air-intake-with-high-flow-oiled-air-filter-k-n-series-50-nextgen","title":"2025-2026 Ford Bronco 2.3L Cold Air Intake with High-Flow Oiled Air Filter | K\u0026N Series 50 NextGen","description":"\u003ch2\u003e2025-2026 Ford Bronco 2.3L Cold Air Intake with High-Flow Oiled Air Filter\u003c\/h2\u003e\u003cp\u003eThis K\u0026amp;N intake is offered for the 2025-2026 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 50-2631.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N builds this intake around the engine application and filter configuration named above. Its molded plastic intake route gives incoming air a different path from the original system. The filter and tube are selected together as a kit, so a filter element by itself is not the same purchase as this intake. The 2.3L, 2.7L, and Raptor versions have different application listings and should not be treated as interchangeable.\u003c\/p\u003e\u003cp\u003eThe intake can make turbo and induction sounds easier to hear as airflow rises under load. That sound change does not tell you how much horsepower the vehicle gained. Any published power result applies to a particular test vehicle and set of conditions. Correct mounting, secure clamps, and intact seals remain essential after installation. Where the system reuses a sensor or vent connection, transfer it exactly as the instructions show rather than leaving a port open.\u003c\/p\u003e\u003cp\u003eK\u0026amp;N reports gains of up to 14.3 hp at 4,900 rpm and 9.7 lb-ft at 4,350 rpm without a tune, with an airflow increase of up to 52.96%. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eK\u0026amp;N reports gains of up to 14.3 hp at 4,900 rpm and 9.7 lb-ft at 4,350 rpm without a tune, with an airflow increase of up to 52.96%.\u003c\/li\u003e\n\u003cli\u003eMolded plastic intake route for the listed engine\u003c\/li\u003e\n\u003cli\u003eSupplied filter matches this exact kit configuration\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eApplication-specific mounting and connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter with a media-specific cleaning procedure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 50-2631. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2025-2026 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eK\u0026amp;N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e50-2631\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB80302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2025-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRU-5303 air filter\u003c\/li\u003e\n\u003cli\u003eAirbox and intake tube\u003c\/li\u003e\n\u003cli\u003eConnecting hose and hose clamps\u003c\/li\u003e\n\u003cli\u003eSensor adapter, gasket, and extension harness\u003c\/li\u003e\n\u003cli\u003ePCV insert, clips, and mounting fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eThis listing does not establish CARB approval. The supplier identifies emissions restrictions; not for sale or use on California pollution-controlled vehicles where prohibited.\u003c\/p\u003e","brand":"K\u0026N","offers":[{"title":"Default Title","offer_id":67937652080714,"sku":"FB80302","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/kn-bronco-series-50-nextgen-cold-air-intake-high-flow-oiled-air-filter-50-2631.FB80302_VOn_01.webp?v=1794255435"},{"product_id":"2021-2024-ford-bronco-2-3l-cold-air-intake-with-pro-dry-s-filter-afe-momentum-gt","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with Pro DRY S Filter | aFe Momentum GT","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with Pro DRY S Filter\u003c\/h2\u003e\u003cp\u003eThis aFe intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 50-70082D.\u003c\/p\u003e\u003cp\u003eThe Momentum GT system pairs a molded intake housing with a filter chosen for this exact application. Its filter-to-housing connection puts the element directly into the enclosure, while the clear inspection window makes the filter easier to check. The housing and intake route are designed around the Bronco engine listed here. This matters because the 2.3L, 2.7L, and Raptor 3.0L versions use different parts even when their outer appearance is similar.\u003c\/p\u003e\u003cp\u003eThe supplied couplings and clamps secure the airflow path between the housing and the engine connections. Proper seating matters as much as the size of the filter: an air leak or loose connection can undermine the installation. The Momentum GT design uses the vehicle’s factory mounting locations. Keep the housing supported at those mounts rather than letting a coupler carry its weight. Inspect the window seal and filter connection during routine service.\u003c\/p\u003e\u003cp\u003eaFe reports up to 5 hp and 8 lb-ft of torque, with 27% more airflow in its testing. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eaFe reports up to 5 hp and 8 lb-ft of torque, with 27% more airflow in its testing.\u003c\/li\u003e\n\u003cli\u003eMomentum GT housing with a filter inspection window\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake route and factory mounting locations\u003c\/li\u003e\n\u003cli\u003eIncluded filter matches the media named in this listing\u003c\/li\u003e\n\u003cli\u003eClamps and couplings secure the intake connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter for repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 50-70082D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eaFe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e50-70082D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB13756\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Cold Air Intake\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":67937652277322,"sku":"FB13756","price":435.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/afe-bronco-momentum-gt-cold-air-intake-pro-dry-s-filter-black-50-70082d.FB13756.webp?v=1794255437"},{"product_id":"2021-2024-ford-bronco-2-3l-cold-air-intake-with-pro-5r-oiled-filter-afe-momentum-gt","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with Pro 5R Oiled Filter | aFe Momentum GT","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with Pro 5R Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis aFe intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 50-70082R.\u003c\/p\u003e\u003cp\u003eThe Momentum GT system pairs a molded intake housing with a filter chosen for this exact application. Its filter-to-housing connection puts the element directly into the enclosure, while the clear inspection window makes the filter easier to check. The housing and intake route are designed around the Bronco engine listed here. This matters because the 2.3L, 2.7L, and Raptor 3.0L versions use different parts even when their outer appearance is similar.\u003c\/p\u003e\u003cp\u003eThe supplied couplings and clamps secure the airflow path between the housing and the engine connections. Proper seating matters as much as the size of the filter: an air leak or loose connection can undermine the installation. The Momentum GT design uses the vehicle’s factory mounting locations. Keep the housing supported at those mounts rather than letting a coupler carry its weight. Inspect the window seal and filter connection during routine service.\u003c\/p\u003e\u003cp\u003eaFe reports up to 7 hp and 10 lb-ft of torque, with 29% more airflow in its testing. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eaFe reports up to 7 hp and 10 lb-ft of torque, with 29% more airflow in its testing.\u003c\/li\u003e\n\u003cli\u003eMomentum GT housing with a filter inspection window\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake route and factory mounting locations\u003c\/li\u003e\n\u003cli\u003eIncluded filter matches the media named in this listing\u003c\/li\u003e\n\u003cli\u003eClamps and couplings secure the intake connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter for repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 50-70082R. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eaFe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e50-70082R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB13758\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Cold Air Intake\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":67937652310090,"sku":"FB13758","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/afe-bronco-momentum-gt-cold-air-intake-pro-5r-oiled-filter-black-50-70082r.FB13758.webp?v=1794255439"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-oiled-filter-mishimoto-performance","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Oiled Filter | Mishimoto Performance","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis Mishimoto intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part MMAI-BR27-21.\u003c\/p\u003e\u003cp\u003eThe Mishimoto Performance intake is built for the twin-turbo 2.7L EcoBoost Bronco. It uses a molded airbox and intake plumbing to change the airflow path while retaining a filter between outside air and the engine. Choose the dry or oiled version according to the element you want to maintain. Both belong to the same engine application, but the filter service process differs.\u003c\/p\u003e\u003cp\u003eMishimoto reports gains of 7.5 horsepower and 7.4 lb-ft of torque in its testing. Those figures are test results rather than a promise for every Bronco. The company also describes a less restrictive intake route and a larger cross-sectional area than the factory arrangement. Changes in intake sound can be noticeable under load. Check nearby accessories before installation, particularly an aftermarket compressor setup that may share space with the housing.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the 2.7L EcoBoost Bronco\u003c\/li\u003e\n\u003cli\u003eMolded airbox and intake plumbing\u003c\/li\u003e\n\u003cli\u003eDry or oiled filter supplied as named in the title\u003c\/li\u003e\n\u003cli\u003eTested gains reported on the stock calibration\u003c\/li\u003e\n\u003cli\u003eMishimoto lifetime warranty subject to manufacturer terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part MMAI-BR27-21. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the KR Off-Road ARB compressor bracket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMishimoto\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eMMAI-BR27-21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB19088\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Cold Air Intake with an Oiled Filter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":67937652342858,"sku":"FB19088","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/mishimoto-bronco-performance-cold-air-intake-oiled-filter-mmai-br27-21.FB19088.webp?v=1794255441"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-dry-filter-mishimoto-performance","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Dry Filter | Mishimoto Performance","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Mishimoto intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part MMAI-BR27-21DW.\u003c\/p\u003e\u003cp\u003eThe Mishimoto Performance intake is built for the twin-turbo 2.7L EcoBoost Bronco. It uses a molded airbox and intake plumbing to change the airflow path while retaining a filter between outside air and the engine. Choose the dry or oiled version according to the element you want to maintain. Both belong to the same engine application, but the filter service process differs.\u003c\/p\u003e\u003cp\u003eMishimoto reports gains of 7.5 horsepower and 7.4 lb-ft of torque in its testing. Those figures are test results rather than a promise for every Bronco. The company also describes a less restrictive intake route and a larger cross-sectional area than the factory arrangement. Changes in intake sound can be noticeable under load. Check nearby accessories before installation, particularly an aftermarket compressor setup that may share space with the housing.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the 2.7L EcoBoost Bronco\u003c\/li\u003e\n\u003cli\u003eMolded airbox and intake plumbing\u003c\/li\u003e\n\u003cli\u003eDry or oiled filter supplied as named in the title\u003c\/li\u003e\n\u003cli\u003eTested gains reported on the stock calibration\u003c\/li\u003e\n\u003cli\u003eMishimoto lifetime warranty subject to manufacturer terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part MMAI-BR27-21DW. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the KR Off-Road ARB compressor bracket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMishimoto\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eMMAI-BR27-21DW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB19086\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Precision Rotational-Molded Airbox\u003c\/li\u003e\n\u003cli\u003e(1) Precision Rotational-Molded Intake Tube\u003c\/li\u003e\n\u003cli\u003e(1) Precision Rotational-Molded Y-Pipe\u003c\/li\u003e\n\u003cli\u003e(1) Removable Airbox Lid\u003c\/li\u003e\n\u003cli\u003e(1) High-Flow Air Filter\u003c\/li\u003e\n\u003cli\u003e(2) Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e(5) Worm Gear Clamps\u003c\/li\u003e\n\u003cli\u003eMounting Brackets and Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":67937652572234,"sku":"FB19086","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/mishimoto-bronco-performance-cold-air-intake-dry-filter-mmai-br27-21dw.FB19086.webp?v=1794255443"},{"product_id":"2021-2024-ford-bronco-2-3l-cold-air-intake-with-oiled-filter-injen-evolution","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with Oiled Filter | Injen Evolution","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis Injen intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part EVO9300C.\u003c\/p\u003e\u003cp\u003eThe Evolution system gives this Bronco application a purpose-built intake route and the filter type identified in the title. Choose by engine and model year before comparing dry and oiled versions. Injen offers multiple Evolution systems for the 2.7L Bronco, including an early 2021-2022 application and a separate later listing. Those part numbers remain separate here so an overlapping year range does not hide a different kit.\u003c\/p\u003e\u003cp\u003eA sound change can be easier to notice than a power change. Intake plumbing and filter design affect how clearly you hear air movement as the turbocharged engine works. Actual power depends on the engine, calibration, test conditions, and the rest of the vehicle. Use this kit’s listed specifications to compare it with another intake; do not apply a horsepower figure from a different Evolution part number. Follow Injen’s instructions for the exact system when positioning its connections and mounting points.\u003c\/p\u003e\u003cp\u003eInjen reports test gains of up to 13 hp and 13 lb-ft of torque for this application. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInjen reports test gains of up to 13 hp and 13 lb-ft of torque for this application.\u003c\/li\u003e\n\u003cli\u003eEvolution intake matched to the listed engine and years\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eDry or oiled element supplied as named in the title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty subject to Injen terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part EVO9300C. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInjen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eEVO9300C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB25291\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Cold Air Intake Tube\u003c\/li\u003e\n\u003cli\u003e(1) Oiled Air Filter\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":67937652605002,"sku":"FB25291","price":453.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/injen-bronco-evolution-cold-air-intake-oiled-filter-evo9300c.FB25291.webp?v=1794255445"},{"product_id":"2021-2022-ford-bronco-2-7l-cold-air-intake-with-oiled-filter-injen-evolution","title":"2021-2022 Ford Bronco 2.7L Cold Air Intake with Oiled Filter | Injen Evolution","description":"\u003ch2\u003e2021-2022 Ford Bronco 2.7L Cold Air Intake with Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis Injen intake is offered for the 2021-2022 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part EVO9301C.\u003c\/p\u003e\u003cp\u003eThe Evolution system gives this Bronco application a purpose-built intake route and the filter type identified in the title. Choose by engine and model year before comparing dry and oiled versions. Injen offers multiple Evolution systems for the 2.7L Bronco, including an early 2021-2022 application and a separate later listing. Those part numbers remain separate here so an overlapping year range does not hide a different kit.\u003c\/p\u003e\u003cp\u003eA sound change can be easier to notice than a power change. Intake plumbing and filter design affect how clearly you hear air movement as the turbocharged engine works. Actual power depends on the engine, calibration, test conditions, and the rest of the vehicle. Use this kit’s listed specifications to compare it with another intake; do not apply a horsepower figure from a different Evolution part number. Follow Injen’s instructions for the exact system when positioning its connections and mounting points.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvolution intake matched to the listed engine and years\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eDry or oiled element supplied as named in the title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty subject to Injen terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part EVO9301C. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2022 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Early 2021-2022 2.7L application; do not substitute for EVO9302 without confirming the manufacturer instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInjen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eEVO9301C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB25293\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2022 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Injen Evolution Cold Air Intake System\u003c\/li\u003e\n\u003cli\u003e(1) Oiled Air Filter\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":67937652637770,"sku":"FB25293","price":472.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/injen-bronco-evolution-cold-air-intake-oiled-filter-evo9301c.FB25293.jpg?v=1794255455"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-oiled-cleanable-cotton-filter-s-b","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Oiled Cleanable Cotton Filter | S\u0026B","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Oiled Cleanable Cotton Filter\u003c\/h2\u003e\u003cp\u003eThis S\u0026amp;B intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 75-5162.\u003c\/p\u003e\u003cp\u003eThis S\u0026amp;B intake uses a large airbox and an engine-specific airflow path with the filter configuration named in the title. The cotton-cleanable and dry-extendable versions are separate products. Selecting one does not supply both filter types. Choose the maintenance routine you prefer before ordering, then match the engine and model-year range. The Bronco Raptor system is its own 3.0L application rather than a substitute for a regular Bronco kit.\u003c\/p\u003e\u003cp\u003eS\u0026amp;B publishes airflow comparisons for its intake systems to show how restriction changes in testing. Those results describe air movement under test conditions, not a guaranteed horsepower increase on every vehicle. The airbox, inlet, and filter work as an assembly, so correctly seating the lid and connections is important. An intake designed for improved airflow still needs a properly fitted filter to keep dirt out of the engine.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge airbox paired with the listed filter version\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake and inlet arrangement\u003c\/li\u003e\n\u003cli\u003eChoose cotton-cleanable or dry-extendable media by SKU\u003c\/li\u003e\n\u003cli\u003eIntake design reduces restriction compared with stock\u003c\/li\u003e\n\u003cli\u003eRaptor kits are listed separately for the 3.0L engine\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 75-5162. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e75-5162\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB49082\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Cold Air Intake Assembly\u003c\/li\u003e\n\u003cli\u003e(1) Oiled Filter\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"S\u0026B","offers":[{"title":"Default Title","offer_id":67937652670538,"sku":"FB49082","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/sb-bronco-cold-air-intake-with-oiled-cleanable-cotton-filter-75-5162.FB49082.webp?v=1794255457"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-dry-extendable-filter-s-b","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Dry Extendable Filter | S\u0026B","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Dry Extendable Filter\u003c\/h2\u003e\u003cp\u003eThis S\u0026amp;B intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 75-5162D.\u003c\/p\u003e\u003cp\u003eThis S\u0026amp;B intake uses a large airbox and an engine-specific airflow path with the filter configuration named in the title. The cotton-cleanable and dry-extendable versions are separate products. Selecting one does not supply both filter types. Choose the maintenance routine you prefer before ordering, then match the engine and model-year range. The Bronco Raptor system is its own 3.0L application rather than a substitute for a regular Bronco kit.\u003c\/p\u003e\u003cp\u003eS\u0026amp;B publishes airflow comparisons for its intake systems to show how restriction changes in testing. Those results describe air movement under test conditions, not a guaranteed horsepower increase on every vehicle. The airbox, inlet, and filter work as an assembly, so correctly seating the lid and connections is important. An intake designed for improved airflow still needs a properly fitted filter to keep dirt out of the engine.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge airbox paired with the listed filter version\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake and inlet arrangement\u003c\/li\u003e\n\u003cli\u003eChoose cotton-cleanable or dry-extendable media by SKU\u003c\/li\u003e\n\u003cli\u003eIntake design reduces restriction compared with stock\u003c\/li\u003e\n\u003cli\u003eRaptor kits are listed separately for the 3.0L engine\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThe Dry Extendable element uses no filter oil. Follow S\u0026amp;B’s instructions for extending its service life and replacing it; do not treat it like the cotton-cleanable version. Inspect the housing, element, and sealing edge after dusty trips. A dry element and an oiled element can require different service products even when their airboxes look alike. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 75-5162D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e75-5162D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB49080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Cold Air Intake with Dry Extendable Filter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"S\u0026B","offers":[{"title":"Default Title","offer_id":67937652703306,"sku":"FB49080","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/sb-bronco-cold-air-intake-with-dry-extendable-filter-75-5162d.FB49080.webp?v=1794255459"},{"product_id":"2022-2026-ford-bronco-raptor-cold-air-intake-with-dry-extendable-filter-s-b","title":"2022-2026 Ford Bronco Raptor Cold Air Intake with Dry Extendable Filter | S\u0026B","description":"\u003ch2\u003e2022-2026 Ford Bronco Raptor Cold Air Intake with Dry Extendable Filter\u003c\/h2\u003e\u003cp\u003eThis S\u0026amp;B intake is offered for the 2022-2026 Ford Bronco with the 3.0L EcoBoost engine. It is a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 75-5168D.\u003c\/p\u003e\u003cp\u003eThis S\u0026amp;B intake uses a large airbox and an engine-specific airflow path with the filter configuration named in the title. The cotton-cleanable and dry-extendable versions are separate products. Selecting one does not supply both filter types. Choose the maintenance routine you prefer before ordering, then match the engine and model-year range. The Bronco Raptor system is its own 3.0L application rather than a substitute for a regular Bronco kit.\u003c\/p\u003e\u003cp\u003eS\u0026amp;B publishes airflow comparisons for its intake systems to show how restriction changes in testing. Those results describe air movement under test conditions, not a guaranteed horsepower increase on every vehicle. The airbox, inlet, and filter work as an assembly, so correctly seating the lid and connections is important. An intake designed for improved airflow still needs a properly fitted filter to keep dirt out of the engine.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge airbox paired with the listed filter version\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake and inlet arrangement\u003c\/li\u003e\n\u003cli\u003eChoose cotton-cleanable or dry-extendable media by SKU\u003c\/li\u003e\n\u003cli\u003eIntake design reduces restriction compared with stock\u003c\/li\u003e\n\u003cli\u003eRaptor kits are listed separately for the 3.0L engine\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThe Dry Extendable element uses no filter oil. Follow S\u0026amp;B’s instructions for extending its service life and replacing it; do not treat it like the cotton-cleanable version. Inspect the housing, element, and sealing edge after dusty trips. A dry element and an oiled element can require different service products even when their airboxes look alike. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. The Raptor’s 3.0L engine requires a Raptor-specific intake, and this listing covers that application. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 75-5168D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2022-2026 Ford Bronco, 3.0L EcoBoost Raptor only. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e75-5168D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB47632\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2022-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e3.0L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Cold Air Intake Tube\u003c\/li\u003e\n\u003cli\u003e(1) Dry Extendable Air Filter\u003c\/li\u003e\n\u003cli\u003e(1) Custom Airbox with Clear Lid\u003c\/li\u003e\n\u003cli\u003e(1) Set of Couplers, Clamps, and Seals\u003c\/li\u003e\n\u003cli\u003e(1) Complete Installation Hardware Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"S\u0026B","offers":[{"title":"Default Title","offer_id":67937652736074,"sku":"FB47632","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/sb-bronco-cold-air-intake-dry-extendable-filter-75-5168d.FB47632.webp?v=1794255461"},{"product_id":"2022-2026-ford-bronco-raptor-cold-air-intake-with-oiled-cleanable-cotton-filter-s-b","title":"2022-2026 Ford Bronco Raptor Cold Air Intake with Oiled Cleanable Cotton Filter | S\u0026B","description":"\u003ch2\u003e2022-2026 Ford Bronco Raptor Cold Air Intake with Oiled Cleanable Cotton Filter\u003c\/h2\u003e\u003cp\u003eThis S\u0026amp;B intake is offered for the 2022-2026 Ford Bronco with the 3.0L EcoBoost engine. It is a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 75-5168.\u003c\/p\u003e\u003cp\u003eThis S\u0026amp;B intake uses a large airbox and an engine-specific airflow path with the filter configuration named in the title. The cotton-cleanable and dry-extendable versions are separate products. Selecting one does not supply both filter types. Choose the maintenance routine you prefer before ordering, then match the engine and model-year range. The Bronco Raptor system is its own 3.0L application rather than a substitute for a regular Bronco kit.\u003c\/p\u003e\u003cp\u003eS\u0026amp;B publishes airflow comparisons for its intake systems to show how restriction changes in testing. Those results describe air movement under test conditions, not a guaranteed horsepower increase on every vehicle. The airbox, inlet, and filter work as an assembly, so correctly seating the lid and connections is important. An intake designed for improved airflow still needs a properly fitted filter to keep dirt out of the engine.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge airbox paired with the listed filter version\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake and inlet arrangement\u003c\/li\u003e\n\u003cli\u003eChoose cotton-cleanable or dry-extendable media by SKU\u003c\/li\u003e\n\u003cli\u003eIntake design reduces restriction compared with stock\u003c\/li\u003e\n\u003cli\u003eRaptor kits are listed separately for the 3.0L engine\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. The Raptor’s 3.0L engine requires a Raptor-specific intake, and this listing covers that application. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 75-5168. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2022-2026 Ford Bronco, 3.0L EcoBoost Raptor only. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e75-5168\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB47633\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2022-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e3.0L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Cold Air Intake Assembly\u003c\/li\u003e\n\u003cli\u003e(1) Filter\u003c\/li\u003e\n\u003cli\u003eHardware Kit\u003c\/li\u003e\n\u003cli\u003eInstructional Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e\u003ch3\u003eBefore your next trail trip\u003c\/h3\u003e\u003cp\u003eCheck that the airbox is fully closed and the intake is supported at its mounting points. Inspect the filter seal for trapped dirt and look for hose contact with nearby parts. Keep the original intake components until the installation has been checked and you are satisfied with the fit.\u003c\/p\u003e","brand":"S\u0026B","offers":[{"title":"Default Title","offer_id":67937652867146,"sku":"FB47633","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/sb-bronco-cold-air-intake-oiled-cleanable-cotton-filter-75-5168.FB47633.jpg?v=1794255464"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-pro-5r-oiled-filter-afe-momentum-gt","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with Pro 5R Oiled Filter | aFe Momentum GT","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with Pro 5R Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis aFe intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 50-70081R.\u003c\/p\u003e\u003cp\u003eThe Momentum GT system pairs a molded intake housing with a filter chosen for this exact application. Its filter-to-housing connection puts the element directly into the enclosure, while the clear inspection window makes the filter easier to check. The housing and intake route are designed around the Bronco engine listed here. This matters because the 2.3L, 2.7L, and Raptor 3.0L versions use different parts even when their outer appearance is similar.\u003c\/p\u003e\u003cp\u003eThe supplied couplings and clamps secure the airflow path between the housing and the engine connections. Proper seating matters as much as the size of the filter: an air leak or loose connection can undermine the installation. The Momentum GT design uses the vehicle’s factory mounting locations. Keep the housing supported at those mounts rather than letting a coupler carry its weight. Inspect the window seal and filter connection during routine service.\u003c\/p\u003e\u003cp\u003eaFe reports up to 16 hp and 25 lb-ft of torque, with 35% more airflow in its testing. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eaFe reports up to 16 hp and 25 lb-ft of torque, with 35% more airflow in its testing.\u003c\/li\u003e\n\u003cli\u003eMomentum GT housing with a filter inspection window\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake route and factory mounting locations\u003c\/li\u003e\n\u003cli\u003eIncluded filter matches the media named in this listing\u003c\/li\u003e\n\u003cli\u003eClamps and couplings secure the intake connections\u003c\/li\u003e\n\u003cli\u003eServiceable filter for repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 50-70081R. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eaFe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e50-70081R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB13755\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCold air intake assembly with Pro 5R oiled air filter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":67937652899914,"sku":"FB13755","price":522.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/afe-bronco-momentum-gt-cold-air-intake-pro-5r-oiled-filter-black-50-70081r.FB13755.webp?v=1794255465"},{"product_id":"2021-2024-ford-bronco-2-3l-cold-air-intake-with-dry-extendable-filter-s-b","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with Dry Extendable Filter | S\u0026B","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with Dry Extendable Filter\u003c\/h2\u003e\u003cp\u003eThis S\u0026amp;B intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 75-5160D.\u003c\/p\u003e\u003cp\u003eThis S\u0026amp;B intake uses a large airbox and an engine-specific airflow path with the filter configuration named in the title. The cotton-cleanable and dry-extendable versions are separate products. Selecting one does not supply both filter types. Choose the maintenance routine you prefer before ordering, then match the engine and model-year range. The Bronco Raptor system is its own 3.0L application rather than a substitute for a regular Bronco kit.\u003c\/p\u003e\u003cp\u003eS\u0026amp;B publishes airflow comparisons for its intake systems to show how restriction changes in testing. Those results describe air movement under test conditions, not a guaranteed horsepower increase on every vehicle. The airbox, inlet, and filter work as an assembly, so correctly seating the lid and connections is important. An intake designed for improved airflow still needs a properly fitted filter to keep dirt out of the engine.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge airbox paired with the listed filter version\u003c\/li\u003e\n\u003cli\u003eEngine-specific intake and inlet arrangement\u003c\/li\u003e\n\u003cli\u003eChoose cotton-cleanable or dry-extendable media by SKU\u003c\/li\u003e\n\u003cli\u003eIntake design reduces restriction compared with stock\u003c\/li\u003e\n\u003cli\u003eRaptor kits are listed separately for the 3.0L engine\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThe Dry Extendable element uses no filter oil. Follow S\u0026amp;B’s instructions for extending its service life and replacing it; do not treat it like the cotton-cleanable version. Inspect the housing, element, and sealing edge after dusty trips. A dry element and an oiled element can require different service products even when their airboxes look alike. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 75-5160D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e75-5160D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB49079\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Cold Air Intake with Dry Extendable Filter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"S\u0026B","offers":[{"title":"Default Title","offer_id":67937652932682,"sku":"FB49079","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/sb-bronco-cold-air-intake-with-dry-extendable-filter-75-5160d.FB49079.webp?v=1794255467"},{"product_id":"2021-2026-ford-bronco-2-3l-cold-air-intake-with-powercore-dry-filter-volant-closed-box","title":"2021-2026 Ford Bronco 2.3L Cold Air Intake with PowerCore Dry Filter | Volant Closed Box","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.3L Cold Air Intake with PowerCore Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Volant intake is offered for the 2021-2026 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 170026.\u003c\/p\u003e\u003cp\u003eThe Volant closed-box intake places the supplied filter inside an enclosure instead of leaving a bare cone exposed in the engine bay. This listing identifies a specific filter version; it does not include all of the filters offered across the Volant range. Match DryTech, PowerCore, or MaxFlow 5 to the maintenance approach you want, and verify the engine application before ordering.\u003c\/p\u003e\u003cp\u003eThe intake housing and the connecting route work together to deliver filtered air to the engine. A secure enclosure and correctly seated connections help the system function as intended. The closed-box design does not make the engine waterproof or change the vehicle’s published operating limits. Look closely at the installation requirements for the engine you own, because the 2.7L instructions can include minor drilling for hose and electrical tie-downs.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEnclosed filter housing with a closed-box design\u003c\/li\u003e\n\u003cli\u003eEngine-specific fitment for the listed EcoBoost application\u003c\/li\u003e\n\u003cli\u003eSupplied filter is the exact version named above\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThe PowerCore element is a dry filter. Do not oil it or assume it can be washed like a cotton-cleanable element. Use the filter manufacturer’s inspection and replacement instructions for this exact part. Keep the sealing surface clean and seat the replacement fully so air cannot pass around the filter. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 170026. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e170026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB25050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Closed Box Cold Air Intake with PowerCore Dry Filter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e\u003ch3\u003eBefore your next trail trip\u003c\/h3\u003e\u003cp\u003eCheck that the airbox is fully closed and the intake is supported at its mounting points. Inspect the filter seal for trapped dirt and look for hose contact with nearby parts. Keep the original intake components until the installation has been checked and you are satisfied with the fit.\u003c\/p\u003e","brand":"Volant","offers":[{"title":"Default Title","offer_id":67937653293130,"sku":"FB25050","price":468.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/volant-bronco-closed-box-cold-air-intake-powercore-dry-filter-170026.FB25050.jpg?v=1794255469"},{"product_id":"2021-2026-ford-bronco-2-3l-cold-air-intake-with-dry-filter-cvf-pro-performance","title":"2021-2026 Ford Bronco 2.3L Cold Air Intake with Dry Filter | CVF Pro Performance","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.3L Cold Air Intake with Dry Filter\u003c\/h2\u003e\u003cp\u003eThis CVF intake is offered for the 2021-2026 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 23BRINT.\u003c\/p\u003e\u003cp\u003eThe CVF Pro Performance intake combines a five-layer dry element with an intake assembly designed for the listed EcoBoost engine. It keeps the original front air-feed arrangement rather than asking you to select a universal filter and fabricate a mount. The washable element provides a serviceable alternative to a disposable filter. A dry element uses no filter oil, so maintenance should follow the cleaner and drying instructions for that media.\u003c\/p\u003e\u003cp\u003eCVF lists this system as using factory mounting points without vehicle modification. Fit the housing securely before tightening the connecting clamps so the parts settle into their intended positions. Airflow measurements help compare restriction under a controlled test, but they do not translate directly into the same percentage increase in horsepower. Keep the engine application and the exact part number in view when comparing the 2.3L and 2.7L versions.\u003c\/p\u003e\u003cp\u003eCVF reports 29% more airflow than stock and a measured flow of 290 CFM at 7 inches H2O. Published test figures can vary with conditions and vehicle configuration; they are not guaranteed gains for every installation.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCVF reports 29% more airflow than stock and a measured flow of 290 CFM at 7 inches H2O.\u003c\/li\u003e\n\u003cli\u003eWashable five-layer dry filter needs no filter oil\u003c\/li\u003e\n\u003cli\u003eFactory mounting points; no vehicle modification listed\u003c\/li\u003e\n\u003cli\u003eRetains the original front air-feed arrangement\u003c\/li\u003e\n\u003cli\u003eEngine-specific Pro Performance intake design\u003c\/li\u003e\n\u003cli\u003eCVF lifetime warranty subject to manufacturer terms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 23BRINT. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCVF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e23BRINT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB62375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Cold Air Intake\u003c\/li\u003e\n\u003cli\u003e(1) Air Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"CVF","offers":[{"title":"Default Title","offer_id":67937653489738,"sku":"FB62375","price":324.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/cvf-bronco-pro-performance-cold-air-intake-black-23brint.FB62375.webp?v=1794255471"},{"product_id":"2021-2026-ford-bronco-2-3l-cold-air-intake-with-drytech-dry-filter-volant-closed-box","title":"2021-2026 Ford Bronco 2.3L Cold Air Intake with DryTech Dry Filter | Volant Closed Box","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.3L Cold Air Intake with DryTech Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Volant intake is offered for the 2021-2026 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 17002D.\u003c\/p\u003e\u003cp\u003eThe Volant closed-box intake places the supplied filter inside an enclosure instead of leaving a bare cone exposed in the engine bay. This listing identifies a specific filter version; it does not include all of the filters offered across the Volant range. Match DryTech, PowerCore, or MaxFlow 5 to the maintenance approach you want, and verify the engine application before ordering.\u003c\/p\u003e\u003cp\u003eThe intake housing and the connecting route work together to deliver filtered air to the engine. A secure enclosure and correctly seated connections help the system function as intended. The closed-box design does not make the engine waterproof or change the vehicle’s published operating limits. Look closely at the installation requirements for the engine you own, because the 2.7L instructions can include minor drilling for hose and electrical tie-downs.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEnclosed filter housing with a closed-box design\u003c\/li\u003e\n\u003cli\u003eEngine-specific fitment for the listed EcoBoost application\u003c\/li\u003e\n\u003cli\u003eSupplied filter is the exact version named above\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 17002D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e17002D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB25046\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Cold Air Intake\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e\u003ch3\u003eBefore your next trail trip\u003c\/h3\u003e\u003cp\u003eCheck that the airbox is fully closed and the intake is supported at its mounting points. Inspect the filter seal for trapped dirt and look for hose contact with nearby parts. Keep the original intake components until the installation has been checked and you are satisfied with the fit.\u003c\/p\u003e","brand":"Volant","offers":[{"title":"Default Title","offer_id":67937653522506,"sku":"FB25046","price":385.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/volant-bronco-closed-box-cold-air-intake-drytech-dry-filter-17002d.FB25046.jpg?v=1794255473"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-drytech-dry-filter-volant-closed-box","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with DryTech Dry Filter | Volant Closed Box","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with DryTech Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Volant intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 17003D.\u003c\/p\u003e\u003cp\u003eThe Volant closed-box intake places the supplied filter inside an enclosure instead of leaving a bare cone exposed in the engine bay. This listing identifies a specific filter version; it does not include all of the filters offered across the Volant range. Match DryTech, PowerCore, or MaxFlow 5 to the maintenance approach you want, and verify the engine application before ordering.\u003c\/p\u003e\u003cp\u003eThe intake housing and the connecting route work together to deliver filtered air to the engine. A secure enclosure and correctly seated connections help the system function as intended. The closed-box design does not make the engine waterproof or change the vehicle’s published operating limits. Look closely at the installation requirements for the engine you own, because the 2.7L instructions can include minor drilling for hose and electrical tie-downs.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEnclosed filter housing with a closed-box design\u003c\/li\u003e\n\u003cli\u003eEngine-specific fitment for the listed EcoBoost application\u003c\/li\u003e\n\u003cli\u003eSupplied filter is the exact version named above\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 17003D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components. The supplier describes minor drilling for hose and electrical tie-downs on the 2.7L installation; plan for that step rather than assuming every closed-box kit is a no-drill swap.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e17003D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB25047\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Closed Box Air Intake System\u003c\/li\u003e\n\u003cli\u003e(1) DryTech Dry Filter\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Volant","offers":[{"title":"Default Title","offer_id":67937653850186,"sku":"FB25047","price":385.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/volant-bronco-closed-box-cold-air-intake-drytech-dry-filter-17003d.FB25047.jpg?v=1794255475"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-powercore-dry-filter-volant-closed-box","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with PowerCore Dry Filter | Volant Closed Box","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with PowerCore Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Volant intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 170036.\u003c\/p\u003e\u003cp\u003eThe Volant closed-box intake places the supplied filter inside an enclosure instead of leaving a bare cone exposed in the engine bay. This listing identifies a specific filter version; it does not include all of the filters offered across the Volant range. Match DryTech, PowerCore, or MaxFlow 5 to the maintenance approach you want, and verify the engine application before ordering.\u003c\/p\u003e\u003cp\u003eThe intake housing and the connecting route work together to deliver filtered air to the engine. A secure enclosure and correctly seated connections help the system function as intended. The closed-box design does not make the engine waterproof or change the vehicle’s published operating limits. Look closely at the installation requirements for the engine you own, because the 2.7L instructions can include minor drilling for hose and electrical tie-downs.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEnclosed filter housing with a closed-box design\u003c\/li\u003e\n\u003cli\u003eEngine-specific fitment for the listed EcoBoost application\u003c\/li\u003e\n\u003cli\u003eSupplied filter is the exact version named above\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThe PowerCore element is a dry filter. Do not oil it or assume it can be washed like a cotton-cleanable element. Use the filter manufacturer’s inspection and replacement instructions for this exact part. Keep the sealing surface clean and seat the replacement fully so air cannot pass around the filter. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 170036. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components. The supplier describes minor drilling for hose and electrical tie-downs on the 2.7L installation; plan for that step rather than assuming every closed-box kit is a no-drill swap.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e170036\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB25051\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Closed Box Cold Air Intake\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Volant","offers":[{"title":"Default Title","offer_id":67937653882954,"sku":"FB25051","price":425.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/volant-bronco-closed-box-cold-air-intake-powercore-dry-filter-170036.FB25051.jpg?v=1794255478"},{"product_id":"2021-2024-ford-bronco-23l-cold-air-intake-with-drytech-3d-dry-filter-corsa-closed-box","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with DryTech 3D Dry Filter | CORSA Closed Box","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with DryTech 3D Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Corsa Performance intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 47002D.\u003c\/p\u003e\u003cp\u003eThe CORSA closed-box intake pairs a molded cross-linked polyethylene enclosure with the filter configuration named in this listing. Its smoked acrylic cover gives you a view of the filter without opening the box. The housing includes a drain to let collected water leave the enclosure, and a hydrophobic pre-filter is part of the design. These features support filter protection but do not turn the intake into a snorkel.\u003c\/p\u003e\u003cp\u003eCORSA lists the system for use without an engine tune. It can also make induction noise and turbo whistle more noticeable when the engine is under load. The DryTech 3D, MaxFlow 5, and Donaldson PowerCore versions remain separate products so the supplied filter is clear before purchase. This intake is incompatible with the Ford factory snorkel system. Do not use its drainage or pre-filter features as a reason to exceed the vehicle’s water-crossing limits.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClosed XLPE housing with a smoked inspection cover\u003c\/li\u003e\n\u003cli\u003eHydrophobic pre-filter and housing drain\u003c\/li\u003e\n\u003cli\u003eFilter version identified in the product title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eNot compatible with Ford’s factory snorkel system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 47002D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the Ford factory snorkel \/ Everglades intake system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCorsa Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e47002D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB60007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Closed Air Box\u003c\/li\u003e\n\u003cli\u003e(1) Air Duct\u003c\/li\u003e\n\u003cli\u003e(1) Air Filter\u003c\/li\u003e\n\u003cli\u003e(1) 3.5” Clamp\u003c\/li\u003e\n\u003cli\u003e(1) 3.5” x 3.25” Silicone Reducer\u003c\/li\u003e\n\u003cli\u003e(1) 3.25” Clamp\u003c\/li\u003e\n\u003cli\u003e(1) Bulb Seal Trim (14.5-Inches)\u003c\/li\u003e\n\u003cli\u003e(1) Bracket\u003c\/li\u003e\n\u003cli\u003e(5) Lid Screws\u003c\/li\u003e\n\u003cli\u003e(1) M6x1 Bolt\u003c\/li\u003e\n\u003cli\u003e(1) Washer\u003c\/li\u003e\n\u003cli\u003e(5) Rubber Washers\u003c\/li\u003e\n\u003cli\u003e(1) 5\/8” Fitting\u003c\/li\u003e\n\u003cli\u003e(1) Rubber Grommet\u003c\/li\u003e\n\u003cli\u003e(1) CORSA Logo Lid\u003c\/li\u003e\n\u003cli\u003e(1) Christmas Tree Clip\u003c\/li\u003e\n\u003cli\u003e(1) M6x1 Flange Nut\u003c\/li\u003e\n\u003cli\u003e(1) Pre-Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":67937653915722,"sku":"FB60007","price":435.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/corsa-performance-bronco-closed-box-cold-air-intake-drytech-3d-dry-filter-47002d.FB60007_VOff_01.webp?v=1794255480"},{"product_id":"2021-2025-ford-bronco-27l-cold-air-intake-with-maxflow-5-oiled-filter-corsa-closed-box","title":"2021-2025 Ford Bronco 2.7L Cold Air Intake with MaxFlow 5 Oiled Filter | CORSA Closed Box","description":"\u003ch2\u003e2021-2025 Ford Bronco 2.7L Cold Air Intake with MaxFlow 5 Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis Corsa Performance intake is offered for the 2021-2025 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 47003.\u003c\/p\u003e\u003cp\u003eThe CORSA closed-box intake pairs a molded cross-linked polyethylene enclosure with the filter configuration named in this listing. Its smoked acrylic cover gives you a view of the filter without opening the box. The housing includes a drain to let collected water leave the enclosure, and a hydrophobic pre-filter is part of the design. These features support filter protection but do not turn the intake into a snorkel.\u003c\/p\u003e\u003cp\u003eCORSA lists the system for use without an engine tune. It can also make induction noise and turbo whistle more noticeable when the engine is under load. The DryTech 3D, MaxFlow 5, and Donaldson PowerCore versions remain separate products so the supplied filter is clear before purchase. This intake is incompatible with the Ford factory snorkel system. Do not use its drainage or pre-filter features as a reason to exceed the vehicle’s water-crossing limits.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClosed XLPE housing with a smoked inspection cover\u003c\/li\u003e\n\u003cli\u003eHydrophobic pre-filter and housing drain\u003c\/li\u003e\n\u003cli\u003eFilter version identified in the product title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eNot compatible with Ford’s factory snorkel system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 47003. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2025 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the Ford factory snorkel \/ Everglades intake system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCorsa Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e47003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB60008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2025 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCold air intake assembly with the filter identified in the title\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e\u003cp\u003eManufacturer intake-family photo shown. The filter supplied is the 47003 configuration named in this listing.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":67937654145098,"sku":"FB60008","price":435.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/47003D_a_lowres.jpg?v=1794255692"},{"product_id":"2021-2025-ford-bronco-27l-cold-air-intake-with-drytech-3d-dry-filter-corsa-closed-box","title":"2021-2025 Ford Bronco 2.7L Cold Air Intake with DryTech 3D Dry Filter | CORSA Closed Box","description":"\u003ch2\u003e2021-2025 Ford Bronco 2.7L Cold Air Intake with DryTech 3D Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Corsa Performance intake is offered for the 2021-2025 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 47003D.\u003c\/p\u003e\u003cp\u003eThe CORSA closed-box intake pairs a molded cross-linked polyethylene enclosure with the filter configuration named in this listing. Its smoked acrylic cover gives you a view of the filter without opening the box. The housing includes a drain to let collected water leave the enclosure, and a hydrophobic pre-filter is part of the design. These features support filter protection but do not turn the intake into a snorkel.\u003c\/p\u003e\u003cp\u003eCORSA lists the system for use without an engine tune. It can also make induction noise and turbo whistle more noticeable when the engine is under load. The DryTech 3D, MaxFlow 5, and Donaldson PowerCore versions remain separate products so the supplied filter is clear before purchase. This intake is incompatible with the Ford factory snorkel system. Do not use its drainage or pre-filter features as a reason to exceed the vehicle’s water-crossing limits.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClosed XLPE housing with a smoked inspection cover\u003c\/li\u003e\n\u003cli\u003eHydrophobic pre-filter and housing drain\u003c\/li\u003e\n\u003cli\u003eFilter version identified in the product title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eNot compatible with Ford’s factory snorkel system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses a dry filter, so do not add filter oil. Follow the filter maker’s instructions for inspection and service. Dry media is not one universal maintenance method: some elements can be washed while others require replacement. Match the service procedure to the exact filter supplied rather than treating every dry element the same way. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 47003D. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2025 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the Ford factory snorkel \/ Everglades intake system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCorsa Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e47003D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB60010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2025 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Cold Air Intake with a Closed Air Box\u003c\/li\u003e\n\u003cli\u003e(1) Dry Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e\u003cp\u003eManufacturer intake-family photo shown. The filter supplied is the 47003D configuration named in this listing.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":67937654177866,"sku":"FB60010","price":435.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/47003D_a_lowres_7572a560-c7f4-466b-bc26-c7f7a2a03e39.jpg?v=1794255693"},{"product_id":"2021-2025-ford-bronco-27l-cold-air-intake-with-donaldson-powercore-dry-filter-corsa-closed-box","title":"2021-2025 Ford Bronco 2.7L Cold Air Intake with Donaldson PowerCore Dry Filter | CORSA Closed Box","description":"\u003ch2\u003e2021-2025 Ford Bronco 2.7L Cold Air Intake with Donaldson PowerCore Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Corsa Performance intake is offered for the 2021-2025 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 470036.\u003c\/p\u003e\u003cp\u003eThe CORSA closed-box intake pairs a molded cross-linked polyethylene enclosure with the filter configuration named in this listing. Its smoked acrylic cover gives you a view of the filter without opening the box. The housing includes a drain to let collected water leave the enclosure, and a hydrophobic pre-filter is part of the design. These features support filter protection but do not turn the intake into a snorkel.\u003c\/p\u003e\u003cp\u003eCORSA lists the system for use without an engine tune. It can also make induction noise and turbo whistle more noticeable when the engine is under load. The DryTech 3D, MaxFlow 5, and Donaldson PowerCore versions remain separate products so the supplied filter is clear before purchase. This intake is incompatible with the Ford factory snorkel system. Do not use its drainage or pre-filter features as a reason to exceed the vehicle’s water-crossing limits.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClosed XLPE housing with a smoked inspection cover\u003c\/li\u003e\n\u003cli\u003eHydrophobic pre-filter and housing drain\u003c\/li\u003e\n\u003cli\u003eFilter version identified in the product title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eNot compatible with Ford’s factory snorkel system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThe PowerCore element is a dry filter. Do not oil it or assume it can be washed like a cotton-cleanable element. Use the filter manufacturer’s inspection and replacement instructions for this exact part. Keep the sealing surface clean and seat the replacement fully so air cannot pass around the filter. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 470036. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2025 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the Ford factory snorkel \/ Everglades intake system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCorsa Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e470036\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB60009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2025 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Air Intake\u003c\/li\u003e\n\u003cli\u003e(1) Dry Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e\u003cp\u003eManufacturer intake-family photo shown. The filter supplied is the 470036 configuration named in this listing.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":67937654407242,"sku":"FB60009","price":475.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/47003D_a_lowres_c365bf83-9dde-4bc5-b760-9f6b6f3bef9d.jpg?v=1794255694"},{"product_id":"2021-2024-ford-bronco-23l-cold-air-intake-with-maxflow-5-oiled-filter-corsa-closed-box","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with MaxFlow 5 Oiled Filter | CORSA Closed Box","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with MaxFlow 5 Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis Corsa Performance intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 47002.\u003c\/p\u003e\u003cp\u003eThe CORSA closed-box intake pairs a molded cross-linked polyethylene enclosure with the filter configuration named in this listing. Its smoked acrylic cover gives you a view of the filter without opening the box. The housing includes a drain to let collected water leave the enclosure, and a hydrophobic pre-filter is part of the design. These features support filter protection but do not turn the intake into a snorkel.\u003c\/p\u003e\u003cp\u003eCORSA lists the system for use without an engine tune. It can also make induction noise and turbo whistle more noticeable when the engine is under load. The DryTech 3D, MaxFlow 5, and Donaldson PowerCore versions remain separate products so the supplied filter is clear before purchase. This intake is incompatible with the Ford factory snorkel system. Do not use its drainage or pre-filter features as a reason to exceed the vehicle’s water-crossing limits.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClosed XLPE housing with a smoked inspection cover\u003c\/li\u003e\n\u003cli\u003eHydrophobic pre-filter and housing drain\u003c\/li\u003e\n\u003cli\u003eFilter version identified in the product title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eNot compatible with Ford’s factory snorkel system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 47002. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the Ford factory snorkel \/ Everglades intake system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCorsa Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e47002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB60005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Closed Box Air Intake System\u003c\/li\u003e\n\u003cli\u003e(1) Air Filter\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eInstructional Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e\u003cp\u003eManufacturer intake-family photo shown. The filter supplied is the 47002 configuration named in this listing.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":67937654440010,"sku":"FB60005","price":435.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/47002D_a_lowres.jpg?v=1794255697"},{"product_id":"2021-2026-ford-bronco-2-7l-cold-air-intake-with-maxflow-5-oiled-filter-volant-closed-box","title":"2021-2026 Ford Bronco 2.7L Cold Air Intake with MaxFlow 5 Oiled Filter | Volant Closed Box","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.7L Cold Air Intake with MaxFlow 5 Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis Volant intake is offered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 17003.\u003c\/p\u003e\u003cp\u003eThe Volant closed-box intake places the supplied filter inside an enclosure instead of leaving a bare cone exposed in the engine bay. This listing identifies a specific filter version; it does not include all of the filters offered across the Volant range. Match DryTech, PowerCore, or MaxFlow 5 to the maintenance approach you want, and verify the engine application before ordering.\u003c\/p\u003e\u003cp\u003eThe intake housing and the connecting route work together to deliver filtered air to the engine. A secure enclosure and correctly seated connections help the system function as intended. The closed-box design does not make the engine waterproof or change the vehicle’s published operating limits. Look closely at the installation requirements for the engine you own, because the 2.7L instructions can include minor drilling for hose and electrical tie-downs.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEnclosed filter housing with a closed-box design\u003c\/li\u003e\n\u003cli\u003eEngine-specific fitment for the listed EcoBoost application\u003c\/li\u003e\n\u003cli\u003eSupplied filter is the exact version named above\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 17003. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components. The supplier describes minor drilling for hose and electrical tie-downs on the 2.7L installation; plan for that step rather than assuming every closed-box kit is a no-drill swap.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.7L EcoBoost; excludes Raptor. Does not fit Bronco Sport. \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e17003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB25049\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.7L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Cold Air Intake System\u003c\/li\u003e\n\u003cli\u003e(1) Oiled Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Volant","offers":[{"title":"Default Title","offer_id":67937654505546,"sku":"FB25049","price":385.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/volant-bronco-closed-box-cold-air-intake-maxflow-5-oiled-filter-17003.FB25049.jpg?v=1794255490"},{"product_id":"2021-2024-ford-bronco-23l-cold-air-intake-with-donaldson-powercore-dry-filter-corsa-closed-box","title":"2021-2024 Ford Bronco 2.3L Cold Air Intake with Donaldson PowerCore Dry Filter | CORSA Closed Box","description":"\u003ch2\u003e2021-2024 Ford Bronco 2.3L Cold Air Intake with Donaldson PowerCore Dry Filter\u003c\/h2\u003e\u003cp\u003eThis Corsa Performance intake is offered for the 2021-2024 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied dry filter is the configuration sold here, identified by manufacturer part 470026.\u003c\/p\u003e\u003cp\u003eThe CORSA closed-box intake pairs a molded cross-linked polyethylene enclosure with the filter configuration named in this listing. Its smoked acrylic cover gives you a view of the filter without opening the box. The housing includes a drain to let collected water leave the enclosure, and a hydrophobic pre-filter is part of the design. These features support filter protection but do not turn the intake into a snorkel.\u003c\/p\u003e\u003cp\u003eCORSA lists the system for use without an engine tune. It can also make induction noise and turbo whistle more noticeable when the engine is under load. The DryTech 3D, MaxFlow 5, and Donaldson PowerCore versions remain separate products so the supplied filter is clear before purchase. This intake is incompatible with the Ford factory snorkel system. Do not use its drainage or pre-filter features as a reason to exceed the vehicle’s water-crossing limits.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClosed XLPE housing with a smoked inspection cover\u003c\/li\u003e\n\u003cli\u003eHydrophobic pre-filter and housing drain\u003c\/li\u003e\n\u003cli\u003eFilter version identified in the product title\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003cli\u003eNot compatible with Ford’s factory snorkel system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThe PowerCore element is a dry filter. Do not oil it or assume it can be washed like a cotton-cleanable element. Use the filter manufacturer’s inspection and replacement instructions for this exact part. Keep the sealing surface clean and seat the replacement fully so air cannot pass around the filter. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 470026. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2024 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the Ford factory snorkel \/ Everglades intake system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCorsa Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e470026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB60006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2024 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Closed Air Box Assembly\u003c\/li\u003e\n\u003cli\u003e(1) Donaldson PowerCore Dry Air Filter\u003c\/li\u003e\n\u003cli\u003e(1) High-Flow Intake Tube\u003c\/li\u003e\n\u003cli\u003e(1) Set Of Clamps And Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e(1) Installation Instruction Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e\u003cp\u003eManufacturer intake-family photo shown. The filter supplied is the 470026 configuration named in this listing.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":67937654800458,"sku":"FB60006","price":475.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/47002D_a_lowres_28a8e7dd-ee02-42c8-af41-3d18af68fedd.jpg?v=1794255697"},{"product_id":"2021-2026-ford-bronco-2-3l-cold-air-intake-with-maxflow-5-oiled-filter-volant-closed-box","title":"2021-2026 Ford Bronco 2.3L Cold Air Intake with MaxFlow 5 Oiled Filter | Volant Closed Box","description":"\u003ch2\u003e2021-2026 Ford Bronco 2.3L Cold Air Intake with MaxFlow 5 Oiled Filter\u003c\/h2\u003e\u003cp\u003eThis Volant intake is offered for the 2021-2026 Ford Bronco with the 2.3L EcoBoost engine. It is not a Bronco Raptor application. The supplied oiled filter is the configuration sold here, identified by manufacturer part 17002.\u003c\/p\u003e\u003cp\u003eThe Volant closed-box intake places the supplied filter inside an enclosure instead of leaving a bare cone exposed in the engine bay. This listing identifies a specific filter version; it does not include all of the filters offered across the Volant range. Match DryTech, PowerCore, or MaxFlow 5 to the maintenance approach you want, and verify the engine application before ordering.\u003c\/p\u003e\u003cp\u003eThe intake housing and the connecting route work together to deliver filtered air to the engine. A secure enclosure and correctly seated connections help the system function as intended. The closed-box design does not make the engine waterproof or change the vehicle’s published operating limits. Look closely at the installation requirements for the engine you own, because the 2.7L instructions can include minor drilling for hose and electrical tie-downs.\u003c\/p\u003e\u003ch3\u003eWhy choose this intake?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEnclosed filter housing with a closed-box design\u003c\/li\u003e\n\u003cli\u003eEngine-specific fitment for the listed EcoBoost application\u003c\/li\u003e\n\u003cli\u003eSupplied filter is the exact version named above\u003c\/li\u003e\n\u003cli\u003ePlastic intake tube construction\u003c\/li\u003e\n\u003cli\u003eNo engine tune listed as required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFilter care\u003c\/h3\u003e\u003cp\u003eThis version uses an oiled filter. Use the filter maker’s specified cleaner and oil, allow the element to dry fully after washing, and apply only the amount of oil instructed. More oil is not a substitute for correct service. Inspect the sealing surface before reinstalling the filter so dirt cannot bypass the element. Dusty trails can require attention sooner than normal paved-road driving. Check the intake after a dusty outing and after work near the airbox. A loose clamp, damaged seal, or poorly seated lid should be corrected before continued use.\u003c\/p\u003e\u003ch3\u003eInstallation and fitment\u003c\/h3\u003e\u003cp\u003eSelect this kit by its engine and years, rather than by trim badge alone. A Badlands, Outer Banks, or Big Bend badge does not by itself identify the intake connections; the engine application is the deciding detail. Existing aftermarket plumbing, a snorkel, or an engine-bay accessory can change available space. Check those interfaces before removing the factory system.\u003c\/p\u003e\u003cp\u003eWork with the engine cool and follow the instructions for manufacturer part 17002. Keep dirt out of open intake connections during the swap. Before starting the engine, check each clamp, mounting point, sensor connection, and vent hose that was disturbed. After the first drive, inspect the connections again for movement or contact with nearby components.\u003c\/p\u003e\u003cp\u003e2021-2026 Ford Bronco, 2.3L EcoBoost; excludes Raptor. Does not fit Bronco Sport. Not compatible with the Ford factory snorkel \/ Everglades intake system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e17002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier SKU\u003c\/th\u003e\n\u003ctd\u003eFB68876\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003ctd\u003e2021-2026 Ford Bronco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003ctd\u003e2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eOiled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake tube material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003eNo Tune Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat’s included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Air Intake\u003c\/li\u003e\n\u003cli\u003e(1) Oiled Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmissions information\u003c\/h3\u003e\u003cp\u003eCARB approval for this exact vehicle application has not been verified. Confirm the applicable emissions approval before purchase or road use in a jurisdiction that requires it.\u003c\/p\u003e","brand":"Volant","offers":[{"title":"Default Title","offer_id":67937654833226,"sku":"FB68876","price":385.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0860\/6794\/files\/volant-bronco-closed-box-cold-air-intake-maxflow-5-filter-17002.FB68876.webp?v=1794255494"}],"url":"https:\/\/broncoforge.com\/collections\/cold-air-intakes-for-the-ford-bronco.oembed","provider":"BRONCO FORGE","version":"1.0","type":"link"}